Clean Install - Multiple drives


  1. Posts : 98
    Win10
       #1

    Clean Install - Multiple drives


    I have a Gateway ZX6800 AIO - previously W7 to W10 upgrades failed but I was able to do clean install. I did this on using a new Samsung SSD with other HD disconnected. I upgrade storage drive from 1TB to 2TB and copied all my data files to the new drive (D:). I have W10 build 1607, MS Office 2016. Only other programs I use are Putty to SSH into my RPIs, Qbittorrent, and Spybot antibeacon. I use Outlook for email and all my mails are IMAP. Wife uses Oulook as well but insists on using a POP3 email. I think my .ost and .pst files are on the D drive but will have to double check that.

    Iím now unable to update this machine to 1709 and think the issue is the drivers for the machineís internal Avermedia TV tuner and the SD card reader. Both of these showed inop after prior clean install but I found working drivers with W10 after some searching. After troubleshooting Iíve resigned myself to having to do another clean install to get 1709. I plan to disconnect the 2TB HD and just do the clean install on the SSD.

    My question is can I do this and then reconnect my data drive and point Win10 documents, photos and music back to the D drive. I also need to set oulook to use my existing pst and ost files. What else might I be forgetting?
      My Computer


  2. Posts : 6,971
    windows 10
       #2

    If your just doing an update then you can just leave everything as it is and it will update ok its only a clean install that may write files to the wrong disk update is fine
      My Computer


  3. Posts : 39,994
    windows 10 professional version 1607 build 14393.969 64 bit
       #3

    Had you tried upgrading from 1607 to 1703?
    What happened?
    What were the failed upgrade error and error codes?

    For 1607 > 1709 what were the failed upgrade error and error codes?

    Consider these options:
    1) backup all important files to another drive
    2) make a backup image using Macrium:
    Macrium Software | Macrium Reflect Free
    3) Save the backup image on another drive or into the cloud
    4) perform a clean install
    Clean Install Windows 10 Installation Upgrade Tutorials
    5) restore the image back to the drive
    Backup and Restore with Macrium Reflect Backup Restore Tutorials

    The alternative is to troubleshoot the Panther logs which have the information about the failed upgrade.
      My Computer


  4. Posts : 17,358
    Windows 11 Pro
       #4

    I'm confused. Clean install version 1709 then restore the image that is version 1607? Won't restoring the image put the OP right back to the same problem they are having now?
      My Computer


  5. Posts : 39,994
    windows 10 professional version 1607 build 14393.969 64 bit
       #5

    One of the solutions for failure to upgrade in other threads was to make a backup images then clean install. The clean install makes new default partition sizes. Then the restoration is done. This was supposed to fix problems related to failed upgrades.

    The computer used to type this post cannot be upgraded from 1703 to 1709. It had failed to upgrade from 1607 to 1703. The folders/files were saved in a Windows RE, the drive was clean installed with 1703, and the folders and files were restored. This was not done with Macrium. Currently it cannot be upgraded from 1703 to 1709. Many months ago there were threads on other websites suggesting the use of a backup image (not a clone) to troubleshoot this problem. If it will fail to work to fix these types of problems please indicate the limitations of the Macrium technique.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 11:07.
Find Us




Windows 10 Forums