Page 3 of 4 FirstFirst 1234 LastLast

  1. Joined : Aug 2015
    Posts : 31
    Win 10 x64 Pro
       07 Aug 2015 #21

    What dell venue 8 pro do you have?
      My System SpecsSystem Spec


  2. Joined : Jun 2015
    Posts : 196
    windows 10 (x64)
       07 Aug 2015 #22

    rive0108 said: View Post
    What dell venue 8 pro do you have?
    5830 with64GB free space 32GB
      My System SpecsSystem Spec


  3. Joined : Jun 2015
    Posts : 1,615
    Windows 3.1 to Windows 10
       07 Aug 2015 #23

    do you have TPM enabled in bios?

    You should get a TPM pop message about over-writing the bios security files..
    Have to push Down Volume to accept
      My System SpecsSystem Spec


  4. Joined : Aug 2015
    Posts : 31
    Win 10 x64 Pro
       07 Aug 2015 #24

    Does the 5830 have the recovery partition?
      My System SpecsSystem Spec


  5. Joined : Jun 2015
    Posts : 196
    windows 10 (x64)
       07 Aug 2015 #25

    Kyhi said: View Post
    do you have TPM enabled in bios?

    You should get a TPM pop message about over-writing the bios security files..
    Have to push Down Volume to accept
    First Kindly explain what is TPM?
    I don't get any message about TPM. It says installing windows 10 after all procedures like checking, updating etc. Goes about 91% or 93% and it says it will reboot in a few minutes. Then I get a dialog box informing installation of windows 10 failed.
      My System SpecsSystem Spec


  6. Joined : Jun 2015
    Posts : 196
    windows 10 (x64)
       07 Aug 2015 #26

    rive0108 said: View Post
    Does the 5830 have the recovery partition?
    Yes. It has.
      My System SpecsSystem Spec


  7. Joined : Aug 2015
    Posts : 31
    Win 10 x64 Pro
       08 Aug 2015 #27

    TPM is were the encryption/bitlocker key is stored.

    You need to do three things:
    1. Backup
    2. Remove hidden recovery partition
    3. Install win10 off USB thumbdrive

    Create a pc Image using windows, create your recovery drive, copy the recovery partition to it, then delete the partition off tablet.

    Right click start control panel/system and security/file history
    Click image for larger version. 

Name:	Capture.PNG 
Views:	314 
Size:	2.9 KB 
ID:	29442

    Turn off bitlocker, then reinstall windows from recovery drive (this is to remove any corruption that may be causing upgrade to fail), then attach the win10 USB thumbdrive, navigate to the "setup" on thumbdrive, and run it. Set tablet to "never" sleep or turn off screen, follow installation prompts. Upgrade takes approx. an hour. Be sure battery is fully charged. During win10 upgrade, be sure to check for updates.

    To turn off bitlocker, pull up charms (right screen swipe), settings/PC info (device encryption setting at bottom):
    Click image for larger version. 

Name:	Capture.PNG 
Views:	15 
Size:	1.05 MB 
ID:	29466

    Running the Win 10 32-bit media off thumbdrive:
    Click image for larger version. 

Name:	Capture.PNG 
Views:	14 
Size:	19.7 KB 
ID:	29444
    Click image for larger version. 

Name:	Capture2.PNG 
Views:	14 
Size:	34.5 KB 
ID:	29445
    Last edited by rive0108; 08 Aug 2015 at 08:17.
      My System SpecsSystem Spec


  8. Joined : Jun 2015
    Posts : 1,615
    Windows 3.1 to Windows 10
       08 Aug 2015 #28

    Press Volume Down button right after Power On to enter Bios
    My settings
    Boot tab > Secure Boot and Fast Boot disabled
    security tab > PTT > TPM enabled


    in regards to - either way same results
    Control Panel > Recovery > Create a Recovery Drive
      My System SpecsSystem Spec


  9. Joined : Jun 2015
    Posts : 196
    windows 10 (x64)
       08 Aug 2015 #29

    rive0108 said: View Post
    TPM is were the encryption/bitlocker key is stored.

    You need to do three things:
    1. Backup
    2. Remove hidden recovery partition
    3. Install win10 off USB thumbdrive

    Create a pc Image using windows, create your recovery drive, copy the recovery partition to it, then delete the partition off tablet.

    Right click start control panel/system and security/file history
    Click image for larger version. 

Name:	Capture.PNG 
Views:	314 
Size:	2.9 KB 
ID:	29442

    Turn off bitlocker, then reinstall windows from recovery drive (this is to remove any corruption that may be causing upgrade to fail), then attach the win10 USB thumbdrive, navigate to the "setup" on thumbdrive, and run it. Set tablet to "never" sleep or turn off screen, follow installation prompts. Upgrade takes approx. an hour. Be sure battery is fully charged. During win10 upgrade, be sure to check for updates.

    To turn off bitlocker, pull up charms (right screen swipe), settings/PC info (device encryption setting at bottom):
    Click image for larger version. 

Name:	Capture.PNG 
Views:	15 
Size:	1.05 MB 
ID:	29466

    Running the Win 10 32-bit media off thumbdrive:
    Click image for larger version. 

Name:	Capture.PNG 
Views:	14 
Size:	19.7 KB 
ID:	29444
    Click image for larger version. 

Name:	Capture2.PNG 
Views:	14 
Size:	34.5 KB 
ID:	29445
    Thanks.
    Is it necessary to remove recovery partition? If so Why? Kindly explain how recovery partition will hinder upgrade if I have already 32 GB empty space? I want to know before starting to do as per your advice.
      My System SpecsSystem Spec


  10. Joined : Jun 2015
    Posts : 196
    windows 10 (x64)
       08 Aug 2015 #30

    Kyhi said: View Post
    Press Volume Down button right after Power On to enter Bios
    My settings
    Boot tab > Secure Boot and Fast Boot disabled
    security tab > PTT > TPM enabled


    in regards to - either way same results
    Control Panel > Recovery > Create a Recovery Drive
    Thanks.
    Just to confirm that I understand what you suggested I would like to know
    1) as Windows 10 needs secure boot why it shoud be disabled?
    2) Will fast boot hinder upgrade. In my laptop upgrade went smooth with both secure boot and fast boot enabled.
    3) before starting upgrade TPM should be enabled. Am I correct?
      My System SpecsSystem Spec


 
Page 3 of 4 FirstFirst 1234 LastLast


Similar Threads
Thread Forum
Something happened, Windows 10 installation has failed error.
About 24 percent into the Windows 10 upgrade installation from Windows 8.1, using the Windows Media Creation Tool, I get the error "Windows 10 installation has failed" error. I searched around, and found a similar post. The popup looks the same....
Installation and Setup
Windows 10 installation has failed.
I'm trying to install Windows 10 IP. However this message pops out. 21674 No idea what's happened. My harddrive has 38GB free. Here's my setuperr.log 2015-06-16 12:02:28, Error MOUPG CSystemHelper::CheckConnectedStandby(642):...
Installation and Setup
dell venue 11 pro 7130
I have just bought this tablet via eBay with Windows 10 pre loaded which I quickly downgraded to Windows 8.1 as I found there was a lack of drivers that was causing problems. Specs are i5 1.6ghz, 4gb RAM, 124gb SSD. I am generally happy with my...
Chillout Room
Solved dell venue 11 pro 7130
im thinking of buying this tablet. with 4gb ramand 128GB SSD has anybody got this and could give me a performance review. im interested on how good it run win 10 also how well does it play games? im a very light gamer and usually play football...
General Support
Dell Venue 8 Pro Install on USB
Anyone want to offer advice on installing Windows 10 Tech Preview on a USB HDD on my Dell Venue 8 Pro with UEFI? I've had no luck.
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:19.
Find Us
Twitter Facebook Google+



Windows 10 Forums