Page 1 of 2 12 LastLast

  1. Joined : Jul 2015
    Posts : 8
    windows 7 ver 6.1.7601 Service Pack 1 Build 7601
       30 Jul 2015 #1

    Error- You need to install at least 2gb of RAM...


    My pc has 8 gb of ram. I have gone into the BIOS and turned on default settings to see if that fixes it (it doesn't).

    Attempting to install off of a flash drive. Trying to boot off of a flash drive instructs me to install while in windows if I want to keep programs/settings (I do). Have not tried installing without saving things would preferably not do it that way.
      My System SpecsSystem Spec


  2. Joined : Jul 2015
    Posts : 8
    windows 7 ver 6.1.7601 Service Pack 1 Build 7601
       30 Jul 2015 #2

    bump
      My System SpecsSystem Spec


  3. Joined : Jul 2015
    Posts : 57
    WinXp; Win7 Pro; Win10 Pro
       30 Jul 2015 #3

    Sounds like to obtain all your settings it must have your original Windows running to do the upgrade.

    People have booted to Windows and not the dvd/flash drive, then run the exe off the dvd/flash drive while in Windows.

    You will have to do this anyway since it's the only way to get your free Windows 10 upgrade activated.
      My System SpecsSystem Spec


  4. Joined : Jul 2015
    Posts : 8
    windows 7 ver 6.1.7601 Service Pack 1 Build 7601
       30 Jul 2015 #4

    Well that brings me back to the first problem--- the windows 10 setup insists I need 2gb of Ram when i have FAR more than that.
      My System SpecsSystem Spec


  5. Joined : May 2015
    Posts : 1,375
    Win 10 14393.51
       30 Jul 2015 #5

    hiricine said: View Post
    Well that brings me back to the first problem--- the windows 10 setup insists I need 2gb of Ram when i have FAR more than that.
    If you fill in your system specs, you may get better help.

    I suppose that all 8GB of RAM shows in your Win 7 installation. What version is it? Is the Win 10 upgrade version on the USB drive the appropriate version? (You need Win 10 home for Win 7 Home premium. For Win 7 Pro or Ultimate, use Pro. You can only upgrade an X64 Win 7 with an X64 Win 10. You don't need the N versions.) I doubt that you've gotten the wrong version, but in the absence of detail...

    The only way you can activate the free Win 10 upgrade is to install it over an activated copy of Win 7 or 8.1. (You also have to keep all applications, files, and settings.) After you've done that once, you can clean install on the same hardware (boot from the USB thumb drive) and it will activate.
      My System SpecsSystem Spec


  6. Joined : Jul 2015
    Posts : 8
    windows 7 ver 6.1.7601 Service Pack 1 Build 7601
       30 Jul 2015 #6

    Updated my info a bit. Never checked it before but in system information I get a "not available" under "installed physical Memory (RAM)". Don't recall exactly what I put in there but I'm beginning to think that might be the problem.
      My System SpecsSystem Spec


  7. Joined : Jan 2014
    Walnut Beach, Milford, Ct
    Posts : 7,603
    Win10 Pro / Remix 3.0
       30 Jul 2015 #7

    hiricine said: View Post
    Updated my info a bit. Never checked it before but in system information I get a "not available" under "installed physical Memory (RAM)". Don't recall exactly what I put in there but I'm beginning to think that might be the problem.
    You can use this to find everything in your PC. It is free.
    Belarc Advisor - Free Personal PC Audit, for software, hardware and security configuration information on your computer. Software license management, IT asset management, cyber security audits, and more.


      My System SpecsSystem Spec


  8. Joined : Apr 2015
    California
    Posts : 362
    Windows 10 Pro x64
       30 Jul 2015 #8

    hiricine said: View Post
    Updated my info a bit. Never checked it before but in system information I get a "not available" under "installed physical Memory (RAM)". Don't recall exactly what I put in there but I'm beginning to think that might be the problem.
    I once had a pc where one of the simms wasn't seated all the way into the simm slot and didn't register in bios. Reseating the simm did the trick.
      My System SpecsSystem Spec


  9. Joined : Jul 2015
    Posts : 8
    windows 7 ver 6.1.7601 Service Pack 1 Build 7601
       30 Jul 2015 #9

    Well I put a little more in there, even that doesn't really have any insight to what kind of RAM I've put in there

    I once had a pc where one of the simms wasn't seated all the way into the simm slot and didn't register in bios. Reseating the simm did the trick.
    I have tried that with no avail. Was thinking of just borrowing a new one or buying new one(s) to see if theres any improvement.
      My System SpecsSystem Spec


  10. Joined : Jan 2014
    Walnut Beach, Milford, Ct
    Posts : 7,603
    Win10 Pro / Remix 3.0
       30 Jul 2015 #10

    I have to ask, Did you run Belarc ?
    It always pick's everything up.
      My System SpecsSystem Spec


 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
On install getting IRQL error
During the upgrade I get IRQL_Not_equal_or_less error then it restarts and puts my windows 7 back to how it was. Causing me to need to download windows 10 again.
Installation and Setup
DISM Error: 0x800f081f despite using install disk?
I'm trying to repair my Windows Store, but DISM seems to refuse to work. I made an installation ISO that's the same version as mu os using the tool, but DISM still gives me a source error. I'm running 10240. C:\WINDOWS\system32>dism.exe /online...
General Support
Solved Windows Installation Error; Will not install on Partition
Hey there, I am trying to install Windows 10 10130 onto my laptop's blank partition that is 400 GB. Upon installing I noticed it gives me an error that says "We couldn't create a new partition or locate an existing one." I'm not sure what this...
Installation and Setup
Solved W10 10049 to 10074 error 0xc1900107 will not install
Have not been able to install W10 10074. Believe I've tried every solution advised. Sony VAIO went right through. HP Pavilion 500-164 DT no go. May have to wait for ISO? Security issue/Network issue? Lost. Any thoughts well appreciated. (Downloads...
Windows Updates and Activation
Solved Can't Install error 0x80070017
I have created a USB install drive with Windows USB/DVD Tool and successfully created a Virtual Machine with Virtual Box. The virtual machine works fine so now I want to run dual boot with Win 7 64bit. Using the same USB drive the installation...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:56.
Find Us
Twitter Facebook Google+



Windows 10 Forums