Page 2 of 3 FirstFirst 123 LastLast

  1. Joined : Jan 2014
    Posts : 954
    Windows 8.1, 10
       17 Jun 2015 #11

    alphanumeric said: View Post
    Do you have a PC that came with Windows 8.0 or 8.1 from the factory? Do an Upgrade on that PC and you'll get 10 Home.
    The only device I have which is running Windows 8.1 Core (actually it's 8.1 with Bing but for this purpose I think it's equivalent) is my little tablet. This has a 32GB solid state drive and uses WIMBoot, so I'm expecting the upgrade to Windows 10 to be troublesome, and therefore was going to leave that one a while.

    So I'm wondering if the following might work:
    1. Download 8.1 Core with the Media Creator
    2. Install in a VM with the key you mentioned
    3. Try the upgrade to 10 Preview - incidentally can I just run Setup from the ISO or is it more complex than that?
      My System SpecsSystem Spec


  2. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,209
    Windows 10 IoT
       17 Jun 2015 #12

    Yeah, I'd leave the tablet be.
    There is no 8.1 Core with Media Center? Media Center can only be added to Pro. Did you mean 8.1 Core with Bing?
    I'm not sure it will let you upgrade to 10 if it's not activated? Yes, running setup should do it.
      My System SpecsSystem Spec


  3. Joined : Jan 2014
    Posts : 954
    Windows 8.1, 10
       17 Jun 2015 #13

    I meant the Media Creation tool thing which lets you download 8.1 ISOs - I've probably got the name wrong as I'm not on my computer right now to look it up.
      My System SpecsSystem Spec


  4. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,209
    Windows 10 IoT
       17 Jun 2015 #14

    Media Creation Tool is it. I got you now. I see what you meant to say.

    EDIT: I see what I did now. I misread Media Creator as Media Center.
      My System SpecsSystem Spec


  5. Joined : Jan 2014
    Posts : 954
    Windows 8.1, 10
       18 Jun 2015 #15

    So I have tried the following:
    1. Use an ISO downloaded using the Windows 8.1 Media Creation Tool
    2. Used this key to install Windows 8.1 in a VM (note that I didn't try to activate it):
      alphanumeric said: View Post
      Windows 8 (core): 334NH-RXG76-64THK-C7CKG-D3VPT
    3. At this point I checked I was running Windows 8.1, not Pro
    4. Within Windows 8.1, I ran Setup using a Build 10130 ISO created using the ESD-to-ISO technique (I have a limited internet allowance - it's a reasonable amount but I can't download too many ISOs or in-place OS Upgrades in a month).

    And I ended up running .... Windows 10 Pro Insider Preview. Ah well!
      My System SpecsSystem Spec


  6. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,209
    Windows 10 IoT
       19 Jun 2015 #16

    I did the online upgrade via the Insiders page. I wanted to test it out their way. I ended up going from 8.1 Core > 10 Home 10074 then to > 10122 > 10130 via Windows update. Sorry that didn't work for you running setup.exe? I would have thought it would get you the Home version. Did you delete the PID.txt file from the sources folder, if its there? My 10130 ISO that I downloaded from the Insider page has one that locks it into Pro. If you see a PID.txt file try deleting it, then try one more time and see if you get Home. Your doing it in a VM so that should make it a little easier to start over, I would think.
      My System SpecsSystem Spec


  7. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,209
    Windows 10 IoT
       03 Jul 2015 #17

    Brink posted these in another thread and I thought I'd pass them on.

    10162 Home = KTNPV-KTRK4-3RRR8-39X6W-W44T3

    10162 Pro = 8N67H-M3CY9-QT7C4-2TR7M-TXYCV

    I don't know if they work in earlier builds.
      My System SpecsSystem Spec


  8. Joined : Jan 2014
    Posts : 954
    Windows 8.1, 10
       03 Jul 2015 #18

    Thanks for the keys. I did manage to have a go with a machine running 8.1 (not Pro) and installed by running setup.exe from the official 10161 ISO.

    I did have some success, in that it installed 10 Home (with all the software from 8.1 carried over), but it wouldn't activate. The Home key you mentioned above doesn't activate either.

    I'm hoping that I followed the right steps and the activation servers were/are busted somehow - I'll try again after the weekend.
      My System SpecsSystem Spec


  9. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,209
    Windows 10 IoT
       03 Jul 2015 #19

    I ran showkey on 10162 and noticed I had a new key. Typing the key into the Check Product Key option in showkey showed it as a Windows 10 Pre-Release Professional Retail key. Up until build 10130 Windows 10 was using windows 8.1 preview keys. You may need to clean install 10162 to use those keys I posted. The 10162 ISO is now available for download on the Insider page. That ISO can install Home or Pro depending on what key you enter.
    Windows 10 build 10162 ISOs Released
    https://www.tenforums.com/software-ap...7-showkey.html
      My System SpecsSystem Spec


  10. Joined : Jan 2014
    Posts : 954
    Windows 8.1, 10
       04 Jul 2015 #20

    alphanumeric said: View Post
    That ISO can install Home or Pro depending on what key you enter.
    Thanks for this.
    I've tried clean installing 10162 with the Home key and as you suggest it installs Home.
      My System SpecsSystem Spec


 
Page 2 of 3 FirstFirst 123 LastLast


Similar Threads
Thread Forum
Solved Anyone using the windows home insider preview? Feedback has changed or
Anyone using the windows home insider preview? Feedback has changed or is really messed up. I will let screenshots tell some of the story. Sorry for the large posting Here is what I get when I try the Feedback app. 24483 Then when I...
Software and Apps
10130 usb/iso upgrade home to W10 pro preview How do I fix it or...?
10130 usb/iso upgrade home to W10 pro preview How do I fix it or will that be fixed with the next build? What would happen if I decided (not that I would, I do have morals. ) keep pro, upgrade to rtm, leave the program? Home version is...
Installation and Setup
Upgrading to release version from preview?
Sorry if this has been asked before, but I keep reading that the release version of W10 will update any W7 or W8 installation. What happens with a Preview version? I am running it only now, and just wonder how that update will work. Do I have to...
Installation and Setup
Will my Key work for Windows 10 when I'll install a 64 bit version?
I am using Windows 7 "32 bit" (64 bit capable), Microsoft had just confirmed that after upgrade to Windows 10, users can do clean install windows any time, so when I'm on Windows 10 32 bit (after upgrade) can I do a clean install using a iso and...
Windows Updates and Activation
Windows 10 Home Insider Preview
If you would like to test the "Core" version... Replace the pid.txt with an ei.cfg file. You can then select Home edition at setup - during setup it will prompt for a key but you have the option to skip, it will activate automatically with this...
Windows Insider
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 04:59.
Find Us
Twitter Facebook Google+



Windows 10 Forums