Page 3 of 5 FirstFirst 12345 LastLast

  1. Joined : Jun 2016
    Posts : 1,385
    Win10 1607
       14 Sep 2016 #21

    Ok . Cos it sounds like it found your OLD C:\ on Disk 1, .........Is it an Image or a Partition Copy?

    not the new C:\Windows (win10) on Disk 0 , or old boot files from windows 7 perhaps if Disk 0 was not totally cleaned.
      My System SpecsSystem Spec

  2.    14 Sep 2016 #22

    So at the moment you have only disk 0 connected and it will not boot?
      My System SpecsSystem Spec


  3. Joined : Jun 2016
    Posts : 1,385
    Win10 1607
       14 Sep 2016 #23

    Said he did CHECK ..... unless disk 0 got unplugged instead ?
      My System SpecsSystem Spec


  4. Joined : Sep 2016
    Posts : 19
    Windows 10 Professional
       14 Sep 2016 #24

    It's the restored partition, I doubt there's any trace left from that old Win7 install...

    Yes, only Disk 0 is connected an can't boot.

    And the blinking " _ " is the same as when I did it the first time that didn't work..
      My System SpecsSystem Spec


  5. Joined : Jun 2016
    Posts : 1,385
    Win10 1607
       14 Sep 2016 #25

    and you totally cleaned Disk 0 of all partitions ? deleted everything ? down to unallocated space?

    And it had the 4 GPT Partition after you booted into win 10 ?


    KB
      My System SpecsSystem Spec

  6.    14 Sep 2016 #26

    And your BIOS is definitely set to UEFI? No CSM settings or anything? I think (but don't know) that flashing cursor is when it is trying to boot legacy.

    If disk 0 is partitioned GPT, has the correct partitions and your BIOS is set to boot UEFI it really should work.

    I'll see if I can find the UEFI command to fix boot - I think it is as easy as booting from macrium disk, going to command prompt and entering bcdboot C:\Windows but let me check (or perhaps someone can confirm).
      My System SpecsSystem Spec


  7. Joined : Jun 2016
    Posts : 1,385
    Win10 1607
       14 Sep 2016 #27

    You maybe right LX07 .............. perhaps the Boot Order is now incorrect with all this unplugging of drives , if UEFI is working the 1st boot device will say Windows Boot Manager , if it is set to something else it maybe why ...
      My System SpecsSystem Spec


  8. Joined : Sep 2016
    Posts : 19
    Windows 10 Professional
       14 Sep 2016 #28

    Hold on, I think I got it....
    (I was trying the automatic repair from windows just in case, prior to doing that manual bcdboot and others... But got tired of waiting and, yes, I'm the worst but I hard rebooted...)

    That MBR boot selection did the trick, I'm gonna send you a screenshot in a bit, something is very very weird there on my BIOS....
    Remember I mentioned there was an MBR on my Disk 1 (Without it being connected) ... Well... Selecting that did the trick...
      My System SpecsSystem Spec

  9.    14 Sep 2016 #29

    If it will boot please do send a picture of disk management...
      My System SpecsSystem Spec


  10. Joined : Jun 2016
    Posts : 1,385
    Win10 1607
       14 Sep 2016 #30

    lx07 said: View Post
    If it will boot please do send a picture of disk management...
    +1 ......it does seem weird .... Disk 1 should not be bootable...
      My System SpecsSystem Spec


 
Page 3 of 5 FirstFirst 12345 LastLast


Similar Threads
Thread Forum
Converting an mbr install to UEFI without loss of data.
Just seen a well presented video that shows how to convert an mbr based installation of windows to a UEFI based install without reinstalling OS and losing data. Convert Windows 7/8/10 Installation from Legacy to UEFI Without Data Loss (Simpler...
Installation and Setup
Recover data from RAW disk?
Hello all! I had Windows 10 Enterprise on a ssd 480gb sandisk ultra II but It's corrupted, I can't even launch Windows or repair tools. I've managed to run repair tools and get a command prompt, as diskpart says, my disk is on a raw partition...
Drivers and Hardware
Data Disk full ? (unlikely)
Not sure this query belongs here; if not, I apologize. I get a pop-up saying that the periodic automatic file backup cannot be completed for lack of space on the hard drive. I assume it refers to the D:\ disk, where my Data is saved and stored. ...
Performance & Maintenance
Evolving Data Loss Prevention in SharePoint Online/OneDrive
Source: Evolving Data Loss Prevention in SharePoint Online/OneDrive for Business and Office applications - Office Blogs
Windows 10 News
Garage Series: Bringing Data Loss Prevention to SharePoint
Source...
Windows 10 News
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:57.
Find Us
Twitter Facebook Google+



Windows 10 Forums