Page 4 of 5 FirstFirst ... 2345 LastLast

  1. Joined : Jul 2014
    San Jose, California
    Posts : 1,953
    Ubuntu14.04x64 MintMate17x64 Win10Prox64
       27 May 2015 #31

    I never had that 100MB partition when I installed Windows 7. I appreciate all of your help and I will save this post, but if I do this it will be for the released Windows 10 and not a TP. For now, I will stay on Windows 7.
    The reason you did not have the 100MB partition is you formatted the drive before you install Win 7. If you left the drive unallocated and install Win 7 then Win 7 installation will create all partitions needed ie. include 100MB reserved partition.
    Last edited by topgundcp; 27 May 2015 at 09:39.
      My System SpecsSystem Spec


  2. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       27 May 2015 #32

    More pieces to the puzzle.
    badrobot and topgundcp gave some excellent information.

    I read your post 1 again but didn't see where you removed the other drive (10125 installed). It shouldn't be an issue, but....
    your disk mgt screen shot only shows the one drive ????


    I'm also going to step back from the System Reserved partition work, it doesn't sound as promising as it did before.

    Thanks for the info re: drive corruption - I wasn't suggesting that your drive was corrupted, only noting what occurred on my and a few other member's machines. I did consider that it might be a contributor though ... if it was happening on your machine - but it is not.

    I'll watch this thread to see if anyone has an epiphany, but it sounds as though you're will to wait for a release closer to Current Branch (RTM).

    As promised - drive partition information:

    BIOS/MBR

    UEFI/GPT

    They're good reads but a bit more technical than the average user really needs. Windows does all of the heavy lifting, so this info is only useful if you're curious, you have different partition requirements or there an issue is caused by an install error.
      My System SpecsSystem Spec


  3. Joined : Sep 2014
    Posts : 92
    64-bit 10240 10 Pro
       27 May 2015 #33

    The 10125 Build is on a separate drive. But it looks just the Win 7 just says windows 10
      My System SpecsSystem Spec


  4. Joined : Sep 2014
    Posts : 92
    64-bit 10240 10 Pro
       27 May 2015 #34

    So All I need to do is to create a 100mg unallocated partition before Win 7?
      My System SpecsSystem Spec


  5. Joined : Sep 2014
    Posts : 92
    64-bit 10240 10 Pro
       27 May 2015 #35

    I am going to try it now.
      My System SpecsSystem Spec


  6. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       27 May 2015 #36

    Gary said: View Post
    I am going to try it now.
    Hold on, there's more to it than that. I think there's a Tutorial on cahnging teh active part over on SEvenForums. Let me see if I can find it.

    If not,
    move the C: part with Minitool PW
    create the 100 MB part
    set the 100 MB part as Active
    run repair three times to move the system over to the first part.
    You'll need a repair disk or install media to run the repair.
    look.
      My System SpecsSystem Spec


  7. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       27 May 2015 #37

    This is pretty good and it also shows how to put another OS on the drive
    System Reserved : Create for Dual Boot - Windows 7 Help Forums

    If you're not going to slice out space for another OS (Win10) - then you only need 100 MB (not the GB described in the tut)

    Startup Repair - Run 3 Separate Times - Windows 7 Help Forums

    Read through both tutorials and ask questions - it's easier even though support in a forum is slower than real-time

    It might be easier to run diskpart and clean the rive (not clean all) and just install Windows 7 on the raw partition (thanks topgun).

    As long as you have your image, you shouldn't have to worry about wiping the drive.

    If you do a clean install of 7 - then I suggest shrinking the C; drive as much as possible (leaving room for your programs of course) and create an extended partition + logical drives. Create a 30 GB partition from the extended part for Win10 and install that on the raw / unallocated logical drive you created for win 10.

    The key is raw / unallocated space for the install (select custom) - let Windows figure out what it wants to do.

    There's a few more tutorials for dual booting if you want to go that route.
    Windows 10 - Dual Boot with Windows 7 or Windows 8 - Windows 10 Forums
    I suggest following step 4 - I find it easier even though step 5 mounts the ISO and installs from there.
    Booting install media gets the current OS out of the way while you install the 2nd OS.
      My System SpecsSystem Spec


  8. Joined : Sep 2014
    Posts : 92
    64-bit 10240 10 Pro
       27 May 2015 #38

    I would like to thank most of allSlartybart and everyone else in this great forum. It finally worked but was not as easy as it started out to be. I really do not like to see Blank Screens when I am upgrading something. I would like to see what MS is actually doing with my Machine. After it got to "Lets Start" , I did nothing but watch a black screen for 45 minutes. I then pressed the reset button and the Lets start started again but this time it said that my Microsoft Wireless Keyboard was not working so I had to connect a standard mouse and keyboard, remove the software from Microsoft's own key board and re install it. I would think that MS should change their update procedure so that users do not see blank screens.
    But I am finally updated and would like to thank everyone that helped me in any way. Again Kudo's to SlartyBart without whom I would still be on Windows 7! All that was required was that 100 MB partition before Windows 7.
      My System SpecsSystem Spec


  9. Joined : Oct 2013
    Texas
    Posts : 7,530
    Windows 10 Pro X64
       27 May 2015 #39

    Gary, it is good to hear that you now have it like you want. Great job Slarybart!
      My System SpecsSystem Spec


  10. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       27 May 2015 #40

    Glad to hear that your My Sixth and Final Attempt to Upgrade Windows 7 Pro worked
    Many members contributed to your success, the tutorials are priceless.

    Please provide Microsoft feedback with your experience. It is important and either needs to be documented as a requirement or fixed before Current Branch (RTM).

    I'm glad you decided to forge ahead, I had changed directions on the issue.

    Thank you for your diligence and determination.

    Gary said: View Post
    .....
    All that was required was that 100 MB partition before Windows 7.
      My System SpecsSystem Spec


 
Page 4 of 5 FirstFirst ... 2345 LastLast


Similar Threads
Thread Forum
Is this my final Windows 10 license key?
I've removed the Windows 10 insider preview installation I had, and gone back to Windows 7. The preview I was running was a direct upgrade installation from Windows 7, and the Win 10 installation was listed as Activated in OS system details. ...
General Support
Windows 10's final build number is delightfully clever
Microsoft has always tried to pick special numbers with meaning for the release to manufacturing of most major versions of Windows. Windows 95 used 4.00.950, Windows 98 used 4.10.1998, Windows Vista rounded off to 6.0.6000, and Windows XP settled on...
Windows Insider
Question about removing all apps in Final/RTM Windows 10
Hey everyone, I was wondering if anyone that has more experience and knowledge on W10 presently could shed some light for me. :) Right now there are only a few items(apps) that you can remove, like XBOX (for people that don't have it), news,...
Software and Apps
W-10 dual boot attempt fails. Selected disk of GPT type
Trying to dual boot build 10130 iso on a fresh install of 8.1. Received a message: "Windows cannot be installed to this disk. The selected disk is not of the GPT partition style" Laptop is an Asus x550c. System recovery to Asus factory...
Installation and Setup
10 Final
Would it be a fair guess that when 10 is released we will not have to do a complete new install. I was thinking the last of the updates would be all that is required, like from 8 to 8.1. now i know that was a complete one but we lost none of our...
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:17.
Find Us
Twitter Facebook Google+



Windows 10 Forums