Page 2 of 2 FirstFirst 12

  1. Joined : Aug 2016
    Toronto
    Posts : 12
    Windows 10
       26 Aug 2016 #11

    flybynite said: View Post
    open powershell as administrator
    type diskpart press enter
    type list disk press enter
    locate your USB drive from list (you can choose by size)
    type sel disk (then number of drive from list for example sel disk 4 then press enter
    type clean then press enter
    type create part pri then press enter
    type sel part 1 then press enter
    type format fs=fat32 quick then press enter
    type assign then press enter
    type active then press enter
    type exit then press enter
    type exit then press enter

    Now mount your ISO file and copy all the files to your usb drive
    restart, and boot from USB drive.
    I can't do format fs=fat32 quick, I get the error:

    Virtual Disk Service error:
    A concurrent second call is made on an object before the first is completed.

    Any ideas?
      My System SpecsSystem Spec


  2. Joined : Aug 2016
    Toronto
    Posts : 12
    Windows 10
       26 Aug 2016 #12

    Freedee15 said: View Post
    I can't do format fs=fat32 quick, I get the error:

    Virtual Disk Service error:
    A concurrent second call is made on an object before the first is completed.

    Any ideas?
    I can't run it even if i delete the quick.
    Trying a restart of computer.
      My System SpecsSystem Spec


  3. Joined : Aug 2016
    Toronto
    Posts : 12
    Windows 10
       26 Aug 2016 #13

    Great, it's working now.
      My System SpecsSystem Spec


  4. Joined : Aug 2016
    Posts : 25
    Windows 10
       26 Aug 2016 #14

    flybynite said: View Post
    open powershell as administrator
    type diskpart press enter
    type list disk press enter
    locate your USB drive from list (you can choose by size)
    type sel disk (then number of drive from list for example sel disk 4 then press enter
    type clean then press enter
    type create part pri then press enter
    type sel part 1 then press enter
    type format fs=fat32 quick then press enter
    type assign then press enter
    type active then press enter
    type exit then press enter
    type exit then press enter

    Now mount your ISO file and copy all the files to your usb drive
    restart, and boot from USB drive.
    UEFI boot mode do not use boot sectors on the hard drive and the USB flash drive, and do not require active partition to be set.

    Format your USB flash drive in Windows Explorer. Note: You need to choose the FAT32 file system.

    When formatting is complete.
    - In Windows 10, mount the Windows 10 ISO image file by right-clicking the ISO image file and choosing Mount. If you donít see Mount command from the context menu, go to Open with -> Windows Explorer instead.
    - Select everything in the mounted ISO image file, and copy them into the USB flash drive you prepared earlier.
      My System SpecsSystem Spec


  5. Joined : Aug 2016
    Toronto
    Posts : 12
    Windows 10
       26 Aug 2016 #15

    Ok, so I've gotten to the install but now it says there is a driver missing.
      My System SpecsSystem Spec

  6.    26 Aug 2016 #16

    Freedee15 said: View Post
    Ok, so I've gotten to the install but now it says there is a driver missing.
    Sounds like a bad iso, perhaps redownload? Here is my ISO, it is pro. If you use Home, you will need to download it from MS.
    Code:
    https://mega.nz/#!xdYBGYAI!5h4kYux9ZfPKWINS8ApXsw_8BgA0SDmMslwAK381QRQ
      My System SpecsSystem Spec


 
Page 2 of 2 FirstFirst 12


Similar Threads
Thread Forum
Install W10 on new SSD Failing
I have a Sony Vaio laptop (VPCYB15KX), a bit old but working nonetheless currently running Windows 7 Home Premium and works fine, but is quite slow so I decided to upgrade to an SSD. Picked up a crucial MX200 250 GB SSD and was going to upgrade to...
Installation and Setup
Failing to replace failing laptop hard drive
Toshiba C55 series with a failing hard drive. My first attempt was to clone the drives using my Acronis True Image 2015. Formatted the new drive and placed in the PC. Old HD in a USB drive enclosure. Booted from the TI "Bootable Rescue Media.."...
Performance & Maintenance
Updates KB3097617 and KB3093266 repeatedly failing to install
Hi all, So I've been struggling for a while with KB3093266 not installing, and now KB3097617 won't install either. They download and do the install prompt, then restart. But upon restarting, it says the updates have failed and reappear in...
Windows Updates and Activation
Windows is failing to install new updates
I have recently upgraded to windows 10 home edition 64 bit from windows 8.1 64 bit. But after that windows update is not working. Many failed attempts are listed in update history. Any help ? Thanks in advance
Windows Updates and Activation
Update keeps failing at 84%. Any way to do a fresh install and activat
I have Windows 7 Pro on a Dell 5420 laptop. I've tried the upgrade multiple times and it always gets to 84% and then the screen goes black/blank. It sits there for upwards of a couple hours. After that it reboots and says Restoring previous...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 18:32.
Find Us
Twitter Facebook Google+



Windows 10 Forums