Page 1 of 2 12 LastLast

  1. Joined : Oct 2015
    Posts : 17
    Windows 10 & 7 home premium
       25 Aug 2016 #1

    won't upgrade to windows 10 anniversay


    I've just about given up. After doing EVERYTHING suggested in all the forum and online suggestions, I still get the error 0xc1900101-0x30018. I've disabled all non microsoft services, disabled wi-fi adapter, tried with a ISO burned to a DVD. Nothing solves the problem. If anyone has been able to update windows 10 home to the new anniversary version after getting this same error, PLEASE let me know how you did it. I am running Windows 10 Home, 32 bit.
      My System SpecsSystem Spec


  2. Joined : Jan 2015
    UK, Midlands
    Posts : 6,522
    Win 10 Pro (1607)
       25 Aug 2016 #2

    Hi, did you upgrade from '7 or have you clean installed at any point?

    If you upgraded, this may cause problems.

    Have you run chkdsk C: /F?

    Some people find that doing an in-place upgrade repair install of your existing version first may help.

    Avoid Windows update as part of the process. Use your physical medium / iso as you have.

    There is a cumulative update after the anniversary upgrade. Make sure you don't specify updates to be applied during the manual upgrade using the above.

    Uninstall your AV.

    Make sure you have at least 450 Mb of unallocated space on your system drive/partition, and enough room for Windows.old to be created (will be smaller than your existing Windows folder) + say 10Gb min.

    Make sure you have no programs installed that modify the GUI.

    Others will probably have specific solutions or ideas.

    Your system specs don't give the model of your PC. Can you confirm it is listed by HP as Win 10 compatible?
      My System SpecsSystem Spec


  3. Joined : Oct 2015
    Posts : 17
    Windows 10 & 7 home premium
       25 Aug 2016 #3

    I did uninstall my AV and disabled the windows firewall' I upgraded from windows 7 pro to the free upgrade for windows 10 home. I've been running windows 10 home for 3 months. Now I'm trying to upgrade to windows 10 anniversary. This is where I'm having all the trouble. I've updated all drivers, PC is compatible. The upgrade runs to the point where it's setting up everything, almost to the end, then crashes and re-installs my previous version. I also ran chkdisk and found no errors.
      My System SpecsSystem Spec


  4. Joined : Jan 2015
    UK, Midlands
    Posts : 6,522
    Win 10 Pro (1607)
       25 Aug 2016 #4

    Try reading the Windows update log:
    Windows Update logs are now generated using ETW (Event Tracing for Windows).
    Please run the Get-WindowsUpdateLog PowerShell command to convert ETW traces into a readable WindowsUpdate.log.


    For more information, please visit http://go.microsoft.com/fwlink/?LinkId=518345

    As before:
    Some people find that doing an in-place upgrade repair install of your existing version first may help.

    What would it cost you to do a clean install, bearing in mind people here often comment that leftovers from an upgrade can cause undesirable problems?

    You could for about £38 buy a program that will transfer your programs and settings to a new installation (rather than doing it all manually).

    Here are links to forum threads where people resolved this error msg:
    (found simply by searching the forum for your error message - if you try that there are probably more)
    Solved Windows 10 Error code 0xc1900101-0x30018 - Page 4 - Windows 10 Forums
    Solved You can not install Windows 10 - 0xC1900101 - 0x30018 - Windows 10 Forums
    Solved Update 10586 fails with error 0x1900101-0x30018 - Windows 10 Forums
    Solved Can't update win 10 build - Windows 10 Forums
      My System SpecsSystem Spec


  5. Joined : Oct 2014
    Posts : 1,437
    W10 Pro + W10 Preview
       25 Aug 2016 #5

    A neighbour has asked me to update W10 Build 1511 to Build 1607 on her laptop which originally came with W7.

    Have just spent an entire wasted day, each time the update goes ahead, then an hour or so later reverts back to 1511.
    No updates are available with 1511 so that cannot be the reason why it cannot proceed, have performed chkdisc.

    Her computer it would appear is somewhat messed up, Powershell or Command prompt admin operated so slowly as to render them useless, all 902 photos and documents were all filed in downloads, so finding the downloaded ISO proved impossible to locate as they were all changed to icons with no other available options.

    All backups were installed on "C" and as she only used the O/S plus 1.1GB of space on the hard drive, yet 85GB of space is used up.

    My question what is the best way to get out of this mess.
      My System SpecsSystem Spec


  6. Joined : Jan 2015
    UK, Midlands
    Posts : 6,522
    Win 10 Pro (1607)
       26 Aug 2016 #6

    Click image for larger version. 

Name:	man_pulling_hair_out.gif 
Views:	20 
Size:	7.0 KB 
ID:	98205

    Run chkdsk & check SMART params to make sure it's worth continuing.
    Back up everything that isn't properly backed up- I guess you've done that.

    Some people find that doing an in-place upgrade repair install of your existing version first may help.
    Try it- if you're an optimist, that is. Don't bother with SFC, DISM...

    But if too much has been messed about with, sometimes you end up having to bite the bullet and clean install as you know...

    Would that take a huge amount of time? .. if not too many programs installed.. best option.
      My System SpecsSystem Spec


  7. Joined : Oct 2014
    Posts : 1,437
    W10 Pro + W10 Preview
       26 Aug 2016 #7

    Three unsuccessful attempts at clean install.....too many conflicting programmes.....MIGRATE-DATA operation.....0xc1900101-ox2000d.

    Have tried M$ safe mode suggestions without success.....only one option left.....reinstall O/S, on new SSD, hopefully by not having to load a W7 disc and upgrading.

    Have suggested replacing HDD with an SSD.....is it possible to clean install a W10 ISO on a new SSD?....as the original HDD loaded with W10 will not be connected.
      My System SpecsSystem Spec


  8. Joined : Jan 2015
    UK, Midlands
    Posts : 6,522
    Win 10 Pro (1607)
       26 Aug 2016 #8

    Have you formatted the drive and wiped everything? - I'm wondering how you can have conflicting programs with a clean install.. and there's nothing to migrate..?

    As to swapping the drive... best way is to have just the one drive in you wish to install windows onto.

    If you have a different drive with Windows already on it, with an active primary partition, then you won't get the result you want.

    What would you hope to gain from the old drive being present?

    A clean install means you'll then have to reinstall programs, configure settings, move data back as necessary..

    And you should be able to simply clean install the current build. There's no need to go back to '7 - that would be a really bad move. Your activation is tied to your hardware, so a clean install is fine.

    Use a boot medium for Win 10 anniversary. Then you've got that for recovery, in-place upgrade install.... should you need it.
      My System SpecsSystem Spec


  9. Joined : Oct 2014
    Posts : 1,437
    W10 Pro + W10 Preview
       26 Aug 2016 #9

    Thank you for replying....you are misunderstanding, perhaps I'm not making myself clear.

    The HDD is clapped out and your above points are irrelevant.
    What I wish to know is......Taking out the knackered HDD which had W10 already installed and authenticated, and replacing it with a BLANK SSD, this is a laptop.

    Is it possible to install on the new SSD W10 1607 using the Windows Media ISO, and does the DVD ISO get me ONLINE in order to install.

    PS....in other words do you have to be inside Windows for it to install an ISO.
      My System SpecsSystem Spec


  10. Joined : Jan 2016
    Posts : 147
    Windows 10
       26 Aug 2016 #10

    No, you don't have to be inside Windows to install the ISO. You need to be inside the ISO to installs. That is for what have been said as clean install.

    Burn the ISO to DVD or insert it to USB and boot it.

    Sorry if I misunderstood.
      My System SpecsSystem Spec


 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
Solved can't upgrade to Win 10 Anniversay
The upgrade installation fails at around 70% with the error code 0xc1900107. How can I correct this error so the update will install. I presently have Windows 10 Home, 64 bit, version 1511.
Installation and Setup
After Win 10 anniversay update, can not drag and drop.
After Win 10 anniversay update, I cannot drag and drop. I have to cut & paste. any help with this? Thanks:)
General Support
Solved System Cleanup Prior to Windows 10 Anniversay Update
Hi All Recently did a Clean Windows 10 Install, Including a system image of the system after the clean install, Thinking may do one more clean up prior to Anniversary update then just update to it, and all is good Avast is used for...
AntiVirus, Firewalls and System Security
List Compelling Reasons to upgrade to Upgrade to Windows 10 for Novice
I feel that we as experts on this forum should try and persuade any novices who are not sure about upgrading to Windows 10 should help explain why its good for them to upgrade from earlier versions. So I'll start off: • Latest security •...
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 23:51.
Find Us
Twitter Facebook Google+



Windows 10 Forums