Page 1 of 2 12 LastLast

  1. Joined : Jul 2016
    Posts : 11
    Windows 10 Pro Build 14393.3
       24 Jul 2016 #1

    Windows 10 clean install stuck installing updates


    Greetings,
    I've just registered into this forum, i hope there would be someone who can solve my problem, thanks before

    My device:
    Laptop Asus G73SW
    Core i7
    8GB RAM
    460M
    2x1TB drive
    UEFI support (but still with old bios interface)

    Media & method used:
    8GB usb drive
    Rufus
    Media creation tiol
    Windows 10 ISO (from any resources)
    Windows 10 Insider Preview ISO
    Windows 10 ISO from ESD convert

    These days i was trying to do a clean windows 10 install via usb disk, but dunno why i'm always stuck at "Installing Updates" section. There's no light indicator flashing on hdd/fdd

    I already tried so many method, like installing on legacy mode, uefi mode, removing my 2nd hard drive, creating bootable drive with ntfs/fat32, downloading iso from another resources, using media creation tool, etc.

    BUT NO LUCK, i don't want to go back to win7 to get windows 10
    I hope if there's someone who can solve my problem, thanks before

    Pic:

    Last edited by andrizmitnick; 24 Jul 2016 at 13:15.
      My System SpecsSystem Spec


  2. Joined : Jul 2015
    Posts : 6,879
    Windows 10 Pro
       24 Jul 2016 #2

    Unplug your computer from any ethernet network connections and disconnect from your WiFi. Do not enter a WiFi password or connect to WiFi if asked during the install. And yes, keep all extra hard drives disconnected until you get it installed on the hard drive/SSD you want Windows 10 on. After it is all installed and stable with a local user account that you create, then you can connect everything else to the computer, connect to ethernet network if you have a wired network, connect to WiFi, and if you want to convert the local user account created to a Microsoft account login.

    If you have problems with it activating right away after you connect to the internet, open a Command Prompt (Admin) and run:
    slmgr /ato

    in the command prompt Window. That will trigger an online automatic activation.
      My System SpecsSystem Spec


  3. Joined : Jul 2016
    Posts : 11
    Windows 10 Pro Build 14393.3
       24 Jul 2016 #3

    NavyLCDR said: View Post
    Unplug your computer from any ethernet network connections and disconnect from your WiFi. Do not enter a WiFi password or connect to WiFi if asked during the install. And yes, keep all extra hard drives disconnected until you get it installed on the hard drive/SSD you want Windows 10 on. After it is all installed and stable with a local user account that you create, then you can connect everything else to the computer, connect to ethernet network if you have a wired network, connect to WiFi, and if you want to convert the local user account created to a Microsoft account login.

    If you have problems with it activating right away after you connect to the internet, open a Command Prompt (Admin) and run:
    slmgr /ato

    in the command prompt Window. That will trigger an online automatic activation.
    Umm, i don't think it will scan any networks if doing a clean install with bootable drive 😕 i've already tried on another laptop, the usb booted and installing windows 10 successfully 😕 i'm having a really really hard time with my current laptop right now 😫😫😫
      My System SpecsSystem Spec


  4. Joined : Jul 2015
    Posts : 6,879
    Windows 10 Pro
       24 Jul 2016 #4

    I have clean installed on my laptop which is very similar to yours with no problems. Didn't pay close enough attention to see yours was a dual drive laptop that is next to impossible to remove the second HDD drive, so forget about doing that!

    Mine:
    Asus X750JA-TH71
    i7-4702HQ
    HD4600 GPU
    8 GB RAM
    2 x 1TB HDDs

    I have since upgraded 1 HDD to 500GB SSD, upgraded RAM to 16 GB, and upgraded the network card to Intel 7260HMW with N-AC dualband WiFi and Bluetooth 4.0.

    I say just make sure you aren't connected to any network and let it go - maybe give it up to 1 hour at that spot in the install.

    Another idea is to make a bootable USB flash drive of Kyhi's recovery drive:
    Windows 10 Recovery Tools - Bootable Rescue Disk - Windows 10 Forums

    Boot from that and download a Windows 10 ISO file to the second hard drive in the laptop:
    Tech Bench

    or download the ISO file to a second USB flash drive (NTFS formmated) and copy the ISO file from the flash drive to the second hard drive. Then in Kyhi's recovery drive, mount the ISO file stored on the second hard drive and install Windows 10 to the first hard drive from there. That's the way I did mine.

    After I got Windows 10 installed on my SSD, then I created a custom recovery partition on the second hard drive by creating a FAT32 partition on it, extracted a Windows 10 installation ISO file to the FAT32 partition, and replaced the Windows 10 boot.wim file with the boot.wim file from Kyhi's recovery drive. If the Windows 10 on the SSD goes bad, I can do a boot override in UEFI to boot from the 2nd hard drive and re-install to the SSD.
    Last edited by NavyLCDR; 24 Jul 2016 at 13:44.
      My System SpecsSystem Spec


  5. Joined : Jul 2016
    Posts : 11
    Windows 10 Pro Build 14393.3
       25 Jul 2016 #5

    I've just followed ur instruction with bootable windows 10 iso and replace boot.wim with kyhi's boot.wim. the installation went successfully, but when it restart, i'm stuck at loading screen with no drive activity. I leave it about 4/5 hours but no luck. Maybe is there something i've just missing? Thanks before
      My System SpecsSystem Spec


  6. Joined : Jul 2015
    Posts : 6,879
    Windows 10 Pro
       25 Jul 2016 #6

    Have you tried forcing power off by holding power key, and then restarting with no USB flash drive inserted?
      My System SpecsSystem Spec


  7. Joined : Jul 2016
    Posts : 11
    Windows 10 Pro Build 14393.3
       25 Jul 2016 #7

    I've already do that recently. Btw can i use fat32 format usb for kyhi's boot.wim? Because if i use ntfs format, the windows was installed as legacy/mbr system not uefi/gpt. Maybe that's the problem for now, or is it something else?

    UPDATE:
    i've successfully install the windows into uefi/gpt, but still has same result, stuck at booting/loading screen
    Last edited by andrizmitnick; 25 Jul 2016 at 02:07.
      My System SpecsSystem Spec


  8. Joined : Jul 2015
    Posts : 6,879
    Windows 10 Pro
       25 Jul 2016 #8

    About the only thing I can think of is power off 3-5 times and see if that forces it to boot in safe mode and then look for something in device manager that might be causing it to hang up.

    Although another question - this is a clean install - have you successfully done an upgrade before? This had Windows 10 on it before from an upgrade?

    Also, are you on the latest bios - v. 205? And is bios set to defaults?
      My System SpecsSystem Spec


  9. Joined : Jul 2016
    Posts : 11
    Windows 10 Pro Build 14393.3
       25 Jul 2016 #9

    Yes, i was on windows 10 insider preview 14366 previously, and i want to install newest build 14393, but when i try to update via windows update or setup.exe, it's always stuck at blank screen after restart prompt from finished preparing files setup. So i try to clean install, but it's never succeed until now.

    Another method i tried is doing a clean install windows 7 and running setup.exe from lastest insider preview iso (14393), but it's also give me a blank screen.

    and then i try again to upgrade to windows 10 via windows update inside the win7. It's successfully installed, i can get into win10 desktop.

    from here i still have some will to get the lastest insider preview build, because at this stage i'm just using the lastest official release (th2), which i think is really old and less feature compared to the lastest 14393 build. So i try to update into lastest insider preview from windows update, but still no luck, it give me a same result, blank screen after restart prompt from windows update.

    So i'll just give up from participating at insider preview build. I think my laptop won't let me install any insider preview build. I'm just gonna use win10 th2 and wait until 2 august, i hope it wouldn't give a same result like this 😂

    Yea, my bios is already at v.205
      My System SpecsSystem Spec


  10. Joined : Jul 2015
    Posts : 6,879
    Windows 10 Pro
       25 Jul 2016 #10

    Houston, we have a problem. If your computer won't take the upgrade to 14393 it is highly unlikely it will take the upgrade to the August 2 Anniversary upgrade because we are 99% certain that build 14393 is the Anniversary upgrade.
      My System SpecsSystem Spec


 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
Stuck are INSTALLING for 2 weeks now - two different W10 Updates !!
I'm stumped - the 2 UPDATES below have never installed in over 2 weeks. They continue to stay at "INSTALLING". There are 8 other updates in the queue now stuck behind these "WAITING TO INSTALL". Why is this happening???? How can I get it kicked...
Windows Updates and Activation
Only 3 Windows Updates installed after Clean Install
I cleaned installed Win10 Pro using the Media Creation Tool and how come I only got 3 updates???? This is very strange. I am assuming I would get more updates than these. Running version 1511 build 10586 Is it because Win10 is too new ??? ...
Windows Updates and Activation
Solved Clean Install on New SSD without installing upgrade
I have reserved my copy of Win 10 (upgrade from Win7 Pro 32bit retail) , but i plan to fit a SSD and instill the 64bit version of Win 10. does windows 10 need to be upgrade installed first so Win 10 recognizes my hardware or can i download the...
Installation and Setup
Install stuck at searching for updates
Installing Windows 10 directly on this pc from media creation tool. When it gets to 'searching for updates' it gets stuck a 0%. Any thoughts? Thanks!!
Installation and Setup
Clean Install of Windows 10 64bit stuck @ Blue Logo
Hello, I currently have Win10 32bit Pro . I made a bootable USB and DVD to upgrade to the 64bit Home version, both yield the same results. Each time I try to perform a clean install, it just hangs at the blue windows logo, no spinning circle just...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:36.
Find Us
Twitter Facebook Google+



Windows 10 Forums