Page 1 of 2 12 LastLast

  1. Joined : Oct 2015
    Posts : 21
    8.1
       17 Jul 2016 #1

    laptop upgraded to 10 is very slow now. install SSD?


    I feel sure that the portable is just not current enough on hardware and marginal on RAM. So I plan to replace the existing HD with a SSD.

    Thelaptop is a Dell E5510. I am so far unfamiliar with W10 and do not know how to determine what the processor is, size of the HDD, and how much RAM it has. Is there software in W10 that will profile the hardware?

    In any case, I expect that the procedure will be the same. This is what I would do in the absence of a better plan:

    update w10
    back up my files
    clone the existing HDD to a SSD using a USB>SATA cable (suggestions for free or low cost software welcomed)
    replace the existing HDD with the SSD
    boot up

    Is this a good plan? Happy to hear a better one.
      My System SpecsSystem Spec


  2. Joined : Jul 2015
    Posts : 6,880
    Windows 10 Pro
       17 Jul 2016 #2

    A clean install would be better, if you don't mind re-installing your programs/applications:
    Clean Install Windows 10 Directly without having to Upgrade First - Windows 10 Forums

    In between steps 6 and 7 of the above tutorial you would remove the HDD and install the SSD and do the clean install to the SSD. You could then connect the HDD to the SATA to USB adapter/cable to retrieve files from it.

    If you do want to clone, Macrium Reflect Free and MiniTool Partition Wizard are both good free programs to accomplish that.
    Macrium Reflect Free

    Best Free Partition Manager for Windows | MiniTool Partition Free
      My System SpecsSystem Spec


  3. Joined : Aug 2015
    Posts : 42
    Windows 10
       17 Jul 2016 #3

    OOOOOPS...disney vaca? I saw that! LOL!
      My System SpecsSystem Spec

  4.    17 Jul 2016 #4

    Might want to check the Bios to be sure the new SSD will be using AHCI and not IDE if the system is an older one. Don't change the setting until you have cloned or backed up the old drive though or it wont boot, See HERE

    In addition, here is another Free cloning software that comes with many SSD drives
      My System SpecsSystem Spec


  5. Joined : Oct 2015
    Posts : 21
    8.1
       17 Jul 2016 #5

    Ahci?


    Am now in another city and so cannot look at the BIOS options. Where in BIOS am I likely to find this setting? I recognize that it is a mass storage issue, but don't know without searching where the option is located.

    (If I understand it, if now set to IDE [which is expect is likely], I need to change to AHCI [after backup and cloning]?)
      My System SpecsSystem Spec


  6. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,351
    Windows 10 Pro X64 14393.576
       17 Jul 2016 #6

    A Google search shows lots of info on Dell latitude E5510 and SSD.
      My System SpecsSystem Spec

  7.    20 Jul 2016 #7

    On the AHCI, that is a change that should be done (IMHO) before you format the SSD for best results.. Cloning first would be a waste in that case. As "Ztruker" mentioned above Googling it would be your best bet. If you are not familiar with your system's bios and what can happen there if the setting are changed in different ways, I would definitely do some reading before changing anything. This thread makes me thing you COULD do it but every situation can be different.

    PS: All the "spec" data you mentioned you could not find is in the command 'msinfo32' run from almost any version of Windows command-line. Tells you everything you want and many things you probably don't want to know.
      My System SpecsSystem Spec


  8. Joined : Oct 2015
    Posts : 21
    8.1
       20 Jul 2016 #8

    Thanks for all the great guidance. Have been googling, reading, etc. and found couple of good UTube videos in point.

    Was thinking of a summary type profiler, but msinfo32 mentioned by questorfla does indeed provide bountiful info (much of it Greek to me). Could not locate anything showing what the total RAM can be, or the number of memory slots, but it is probably in there somewhere. Also found Belarc Advisor, which is good summary GUI type.
      My System SpecsSystem Spec


  9. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,351
    Windows 10 Pro X64 14393.576
       20 Jul 2016 #9

    From the online Manual page, Specifications:

    Memory Connectors: four internally-accessible DDR3L DIMM sockets
    Type: unbuffered, Non-ECC, quad‑channel DDR3
    Speed: up to 1600 MHz
    Capacities: 4 GB and 8 GB
    Configurations supported: 4 GB, 8 GB, 12 GB, 16 GB, 24 GB and 32 GB
    Minimum: 4 GB
    Maximum: 32 GB
      My System SpecsSystem Spec

  10.    20 Jul 2016 #10

    Good Man ZT . The online manual from Mfr is always best. Sounds like he could end up with a heckuva decent laptop. 32 GB of Ram Would make an excellent portable "desktop" IMHO!
      My System SpecsSystem Spec


 
Page 1 of 2 12 LastLast


Similar Threads
Thread Forum
Reformat upgraded win10 laptop
Good day! I have a laptop that started with Windows 8. Then I upgraded to 8.1 then to 10 after the update was offered. However, I hate the bloatware included with the laptop for it takes quite some time for the laptop to be fully functional...
Windows Updates and Activation
Just upgraded, everything slow and unresponsive
I just upgraded to windows 10 yesterday, and it was very slow, but I figured I just needed to shut it down for the night. When I turned it on this morning, it took almost two hours before it even got to the desktop! I have been having problems with...
General Support
Solved Laptop had Win 8 and upgraded to Win 10. Can I install a clean Win 10?
As topic says, friends laptop had Win 8 and he updated to Win 10. Now I wonder if he can install a clean Win 10 through USB with his Win 8 serialkey.
Installation and Setup
Upgraded back To Windows 10. Same Slow Boot Issue
Hi guys, in my previous posts I had mentioned that I rolled back to Win 7 due to some issues mainly slow boot. I upgraded back today and the issue still remains. I have tried many of the fixes given online but with little success. In BIOS...
Performance & Maintenance
Solved Anybody upgraded OEM (laptop/PC) to Windows 10?
I've just upgraded one of my laptops from factory installed OEM 7 Professional to Windows 10 Professional, for whatever reason its being reported as retail, the bit that confuses me is in control panel / system, underneath Windows Edition it says ...
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:36.
Find Us
Twitter Facebook Google+



Windows 10 Forums