Windows 10: How to "point" W10 install to a new drive (ssd)
How to "point" W10 install to a new drive (ssd)
My current C: drive, won't refresh because of "unsupported layout for UEFI firmware". Research indicates that I would have to clean off the entire disk (4 partions) in order to make it GPT so the install could proceed.
I have a 119GB SSD that I designated a GPT disk, but otherwise, it is empty. How would I direct a clean install of W10 to the SSD? If that works, how do I take the original boot drive out of operation while still retaining access to the many apps and programs on the original C: drive?
Which one of the steps in this tutorial are you getting blocked at: Windows 10 - Clean Install ? Of particular relevancy in your case would be Steps 10 and 13.
Designer. Gamer. Dad.
If I understand you correctly, you wanted to clean install Windows 10 on SSD while keeping the old installation to use the programs but not the OS? That won't work. You have to reinstall everything to the SSD.
Word Man said:
In your situation you should just use MBR instead of GPT, it might work a lot better. I am running my new Asus Z-97A with UEFI and MBR and it is a great combination.
Run with MBR
That's what I'm doing at the moment, but when I try to do a refresh install, it fails with the message: "unsupported layout for UEFI firmware." Another big issue is that somehow I am missing a MSR partition on my boot drive.
Seems as though I'm going to have to clean the disk and reinstall.
Thanks for your support.
Designer. Gamer. Dad.
I am running both MBR and GPT at the same time on my ASRock Z97 Extreme6 mobo. GPT as my main 10586 OS and the Insider Preview on MBR. This setup work perfectly if you don't want 2 OSes to mess up with each other. But I agree that running on MBR is less complicated.
My disk situation.
Here's a capture of my disk situation. Drive 4 is the boot drive. It seems to have no MSR partition. The entire disk is not GPT, and it seems that I can't install an MSR on a non-GPT disk. My present plan is to move the contents of F: to J: then convert F: to GPT and reinstall a backup of C: on F:
I have no idea if converting F: to GPT will automatically create a MSR partition; but I can try this without clearing Drive 4. I also have backups.
I am avoiding Drive E: (the SSD) because it is too small to hold my current Drive 4 C: partition. If I did put Win10 (only) on Drive E: , would other programs or apps also have to be placed on that drive, or could E: deal with them when they were on another drive? I am really unsure in this area because I have just been slapping new programs onto my rather large C: partition.
Thanks for your help.
So my C: Drive has been acting up lately, with barely enough space to stay alive. I tried to take some space off the D: Drive, which has 240 GB of unused space, and add it to the C: Drive using Disk Management. But when I shrink the D: Drive and...
I just purchased a 1TB Samsung 850 EVO SSD to replace my 1TB WD HDD. I cloned my Win10 OS drive using Macrium Reflect, as I have successfully done countless times in the past from HDD to HDD, HDD to SSD, and so on..
When attempting to boot from...
My Windows 10 laptop has several shared drives (not folders).
They are shared with Everyone, Full Control, Password-Protected sharing is off.
I can't access them from my main PC, but I can access the Users\Public folder.
So my sister's Windows 8.1 laptop's hard drive is broken... with her OS on it. I'm getting her a new hard drive (internal) which I will fit, but it seems pointless to buy windows all over again when she still owns it. I was thinking I could...
Here is the story:
I have one 64 bit mini-tower and a number of laptops. I held back on converting the mini-tower to W10 until about a week ago as it has ALL of my files (capitalized "all" for dramatic effect). I figured we were so close to the...