1. Joined : Mar 2016
    Posts : 43
    Windows 10
       18 May 2016 #1

    GPT for OS move?


    Problem: Can't use Refresh on my MBR boot drive because of UEFI/GPT restrictions. Alternative 1: It seems that none of the partition managers, commercial or Win-based will change the current C:\ MBR to GPT without wiping out the disk content. I have three partitions on the c: drive. If I clean the partitions (after backup) with Win 10 running, is enough of it in memory to allow a removal of the boot drive content and change the drive to GPT?? Alternative 2: would be to clean an available drive, apply a GPT boot table and use a utility to transfer the OS. Alternative 3: would be to clean a drive set it to GPT and do a clean install of v. 1511 (build 10586.318) that I have on hand. Then I'd have to manually install all the "lost" apps from the old drive.
    I'm sure I'm missing some logical procedure here. Anyone out there have ideas? I'd be very grateful!
      My System SpecsSystem Spec


  2. Joined : Apr 2014
    Space coast of Florida
    Posts : 4,358
    Windows 10 Pro X64 14393.576
       23 May 2016 #2

    Google shows lots of hits for convert mbr gpt without data loss
      My System SpecsSystem Spec


  3. Joined : Aug 2015
    Posts : 23
    Microsoft Windows 10 Pro N 64-bit 10240 Multiprocessor Free
       23 May 2016 #3

    Ztruker said: View Post
    Google shows lots of hits for convert mbr gpt without data loss
    you can only do that on partition or hdd that hasn't bootloader
      My System SpecsSystem Spec


  4. Joined : Jun 2015
    Posts : 1,615
    Windows 3.1 to Windows 10
       23 May 2016 #4

    What are the three partitions on the MBR drive ??

    You can use my Bootable PE Rescue disk (link in sig below)

    Use macruim reflect to backup the OS partition to external drive..

    clean and convert current drive to GPT
    create a GPT partition layout > EFI, Reserve, OS, Recovery tools
    restore the backup to the new OS partition

    use the option in macrium to repair boot files

    or you can do it manually via a bcdboot command
      My System SpecsSystem Spec


  5. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       23 May 2016 #5

    Kupuna said: View Post
    Problem: Can't use Refresh on my MBR boot drive because of UEFI/GPT restrictions. Alternative 1: It seems that none of the partition managers, commercial or Win-based will change the current C:\ MBR to GPT without wiping out the disk content. I have three partitions on the c: drive. If I clean the partitions (after backup) with Win 10 running, is enough of it in memory to allow a removal of the boot drive content and change the drive to GPT?? Alternative 2: would be to clean an available drive, apply a GPT boot table and use a utility to transfer the OS. Alternative 3: would be to clean a drive set it to GPT and do a clean install of v. 1511 (build 10586.318) that I have on hand. Then I'd have to manually install all the "lost" apps from the old drive.
    I'm sure I'm missing some logical procedure here. Anyone out there have ideas? I'd be very grateful!
    Depends on the goal - are you determined to have GPT?

    Option 1
    Set firmware to legacy (or cms)
    Disable Secure boot

    This will let you run the system on the existing MBR drive

    Option 2
    Run Belarc to get your software audit (including keys)

    Make sure your Win10 install media is on a Fat32 formatted USB with - or - on a DVD

    Leave firmware as UEFI
    Disable Secure boot

    Clean a spare drive (no partitions, not initialized MBR or GPT) - diskpart clean
    Install Win10 - it will initialize the drive GPT and create the correct partition schema.
    Install your favorite apps - but get the latest from the vendor site (too many bugs caused by old software)

    Read through this tutorial and ask any other questions:
    Windows 10 - Clean Install
      My System SpecsSystem Spec


  6. Joined : Mar 2016
    Posts : 43
    Windows 10
       24 May 2016 #6

    [QUOTE=Slartybart;679605]Depends on the goal - are you determined to have GPT?

    Option 1
    Set firmware to legacy (or cms)
    Disable Secure boot

    This will let you run the system on the existing MBR drive

    Option 2
    Run Belarc to get your software audit (including keys)

    Make sure your Win10 install media is on a Fat32 formatted USB with - or - on a DVD

    Leave firmware as UEFI
    Disable Secure boot

    Clean a spare drive (no partitions, not initialized MBR or GPT) - diskpart clean
    Install Win10 - it will initialize the drive GPT and create the correct partition schema.
    Install your favorite apps - but get the latest from the vendor site (too many bugs caused by old software)

    Read through this tutorial and ask any other questions:
    Windows 10 - Clean Install[

    In reply: A short story. I'm typing on my portable tonight. Had to take my PC to an experienced service shop
    today. My problem was because attempts to refresh Win10 kept resulting in failure and notices that I had "unsupported layout for UEFI firmware". That led to the attempts to change MBR to GPT because I read advice that UEFI worked properly only with GPT. (It is now becoming clear that is not true.)
    I finally started moving copies of the C: partition to another location so I could change the boot drive too GPT (it had to be bare, so I learned). At that point chaos ensued in the BIOS. I wound up with 14 instances listed in the BIOS that all said "Windows Boot Manager"
    Trying to correct that (!) I reached the point where all the machine would show was the ASUS logo. That was the point at which I unplugged everything and hauled it downtown. The tech is older and quite experienced with "enthusiasts" like me. Smiling, he said: "You guys tend to overthink everything." I had to agree. ....But I'll probably do it again someday. Thanks to all of you for your advice of any kind. I genuinely appreciate this group!
      My System SpecsSystem Spec


  7. Joined : Jun 2015
    Posts : 1,615
    Windows 3.1 to Windows 10
       24 May 2016 #7

    GPT is only supported by UEFI...
      My System SpecsSystem Spec


  8. Joined : Jul 2015
    Posts : 6,899
    Windows 10 Pro
       24 May 2016 #8

    Kyhi said: View Post
    GPT is only supported by UEFI...
    Booting from a GPT disk is only supported by UEFI. Secondary drives partitioned with GPT do not require UEFI.
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
Is it possible to move W10 to a new motherboard?
Hi there! I have Windows 10 in my current PC (upgraded some months ago from Windows 7). However, this computer doesn't have a good performance when playing video games or at least, not the desired performance. I was thinking about changing...
Installation and Setup
Solved Move Windows 10 to SSD
The C: drive on my computer is a HDD running Windows 10 Pro. I'm planning to install a SSD and make it my C: drive. Can I transfer my system to the SSD by doing a system image on my HHD and restoring the image to the SSD? Does anyone fresee any...
Installation and Setup
Move win 10 from 1 ssd to new ssd
Used Minitool to copy old ssd entirely to new ssd. Missing boot manager and bcd files. Copied from old to new. No joy?
Installation and Setup
Solved ISO - keep or move ?
I've been using W10 in VMware since Oct and using Windows Updates to get the the latest builds. I've now decided to start afresh and scrapped everything and d/loaded the ISO for 10130 which I'm now running in VMware. Am I correct in thinking...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:28.
Find Us
Twitter Facebook Google+



Windows 10 Forums