Page 1 of 10 123 ... LastLast
  1.    25 Mar 2016 #1

    Cloning to SSD


    First question here on 10 forum but used 7 forum lots. Anyway I am trying to clone the HDD? reduced partion to 450GB so as to be less than theSSD on my laptop. Trying to clone to a Samsung EVO 850 500GB. I have used the Samsung migration software and a version of EaseUS both give same error ie OS cannot be found. Now I think it is because the MBR is not being copied or if it is something is going wrong with it. This version of 10 was a free upgarde from8.1 for which I had a recovery stick but I have nothing to do the same on 10.
    Am I missing something obvious here?

    Thanks
      My System SpecsSystem Spec


  2. Joined : Jun 2015
    Posts : 1,604
    Windows 3.1 to Windows 10
       25 Mar 2016 #2

    Are you cloning the partition or the disk??

    You can also just clean install windows 10 to that PC / SSD - since you already have digital entitlement..
      My System SpecsSystem Spec

  3.    26 Mar 2016 #3

    Hi
    I am attempting to clone the C partition only. Not sure how I can do a clean install to the SSD as it is the only drive on the laptop.
      My System SpecsSystem Spec


  4. Joined : Jan 2014
    Inverness
    Posts : 720
    Win 10
       26 Mar 2016 #4

    I was never successful cloning my hard drive to a new Samsung SSD. I tried both the program on the Samsung disc, my Macrium Reflect Cloning process and another cloning program. Never got it going. I finally did a "disc image" (backup) of the hard drive to the drive I used for backups. I then "restored" to the SSD and success.

    We did some testing on the Win 7 forum with one of our "gurus" and the conclusion was cloning is a hit or miss. Works for some and not others.

    One other thought on cloning. When You clone you copy everything, data, bad sectors and blank areas on the drive. If you do an image you only get the actual data, not bad blocks, blanks, etc.
      My System SpecsSystem Spec


  5. Joined : Oct 2013
    Posts : 1,962
    Windows 7
       26 Mar 2016 #5

    Jack is right. Cloning is a hit and miss. It is at the physical level and not at the logical level. Use imaging and it should work.
      My System SpecsSystem Spec


  6. Joined : Oct 2015
    Posts : 6
    Win 10 64 bit
       26 Mar 2016 #6

    Kyhi said: View Post
    Are you cloning the partition or the disk??

    You can also just clean install windows 10 to that PC / SSD - since you already have digital entitlement..
    Hi,

    I am getting confused about the best way to proceed for replacing Lenovo yoga 500's HDD with a new SSD. I've thought about it and read a few forums etc, but still not sure. If I simply remove the HDD and replace it with a blank SSD, how would I get the laptop to boot? Do I perhaps download a Win 10 ISO onto a usb stick and try to install it onto the installed SSD? I had thought of cloning HDD to external SSD, then swapping, then doing clean install of windows 10. There's nothing much on the laptop so far apart from browser, so I don't mind and would prefer clean install.

    Finally, the Yoga 500 was sold to me as Win 10, but it seemed like they had done the upgrade from 8.1, so there was a few driver conflicts etc therefore I did fresh Win 10 install.

    Any advice or comments would be gratefully received, thanks.
      My System SpecsSystem Spec


  7. Joined : Jul 2015
    Posts : 6,858
    Windows 10 Pro
       26 Mar 2016 #7

    You get the laptop to boot from a Windows 10 install USB flash drive or DVD. If you are going to clean install anyway, there is no reason to clone first.
      My System SpecsSystem Spec


  8. Joined : Oct 2015
    Posts : 6
    Win 10 64 bit
       26 Mar 2016 #8

    Thanks for the prompt and helpful reply.
      My System SpecsSystem Spec

  9.    27 Mar 2016 #9

    fireberd said: View Post
    I was never successful cloning my hard drive to a new Samsung SSD. I tried both the program on the Samsung disc, my Macrium Reflect Cloning process and another cloning program. Never got it going. I finally did a "disc image" (backup) of the hard drive to the drive I used for backups. I then "restored" to the SSD and success.

    We did some testing on the Win 7 forum with one of our "gurus" and the conclusion was cloning is a hit or miss. Works for some and not others.

    One other thought on cloning. When You clone you copy everything, data, bad sectors and blank areas on the drive. If you do an image you only get the actual data, not bad blocks, blanks, etc.
    How does that work on a laptop. I have no disk to do an image too only my HDD and the SSD
      My System SpecsSystem Spec

  10.    27 Mar 2016 #10

    NavyLCDR said: View Post
    You get the laptop to boot from a Windows 10 install USB flash drive or DVD. If you are going to clean install anyway, there is no reason to clone first.
    Not sure how I get a usb sorted so as I can boot from it.
      My System SpecsSystem Spec


 
Page 1 of 10 123 ... LastLast


Similar Threads
Thread Forum
HDD Cloning issues
Hello, I have tried to "clone" a laptop, UEFI/GPT, HDD using Macrium and AOMEI Partition Assistant and it seems to work fine, but the resulting "clones" are not bootable. Am I missing something? Thanks, Jim
Installation and Setup
Solved Cloning
I want a backup copy of my hard drive or a image so if I loose my hd I can reinstall the copy. I have extra external hd and docking station. Thanks Ben
Performance & Maintenance
Cloning with a new key and 8.1 key activation
I have a Windows 10 machine that has the same configuration that I want for another machine that I have purchased without an OS. What I am considering, to make life easier is to clone the drive of the configured machine to the new one and then,...
Installation and Setup
Cloning HDD to SSD in a different computer?
Hey everyone, Just wanted to get a feel on this before i dig into it. I have a dell laptop (school) that i got a SSD for. I also have a clevo laptop at home (main computer), and it has two 2.5" driver bays. Could i install my current dell HDD and...
Installation and Setup
OEM cloning windows 10
Hi, I purchased a laptop with OEM windows 8.1 last year and managed to clone the HDD to an SSD after much trial and error. I wish to now upgrade to windows 10 on this cloned SSD but am concerned that I may run into issues with regard...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:09.
Find Us
Twitter Facebook Google+



Windows 10 Forums