Page 1 of 3 123 LastLast
  1.    30 Dec 2014 #1

    Create Windows to Go without using the WAIK or ENTERPRISE


    Hi there

    I think this method of creating a Windows to Go system is easier - it doesn't need the WAIK download and it IMO is much easier than the tutorial in the tutorials section.

    [Tutorial]Windows 8 to Go without Enterprise Edition - Microsoft (Windows) Discussion & Support - Neowin Forums

    This method also works for W8/8.1 systems. It won't work for W7 as the bcdboot.exe command is different.

    Cheers
    jimbo
      My System SpecsSystem Spec


  2. Joined : Jan 2014
    Oak Ridge TN, USA
    Posts : 23,939
    Windows 10 Pro x64
       30 Dec 2014 #2

    Thanks,, I'll check this out.
    Jeff
      My System SpecsSystem Spec


  3. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,246
    Windows 10 IoT
       07 Jan 2015 #3

    I may have to get off my @ss and give this another go. I have a nice Kingston 64 gig HyperX USB 3.0 thumb drive I want to use. The official Windows to Go utility won't let me use it. But will let me use my crappy old 5400 laptop drive in a USB 2.0 enclosure. WTF?
      My System SpecsSystem Spec


  4. Joined : Nov 2013
    Posts : 804
    10 Pro Preview x64
       07 Jan 2015 #4

    Actually DISM works for me (on 8.1 and 10 not sure about earlier) - no need to download anything.

    1. Diskpart (clean, create partition primary, format quick fs=ntfs, active).
    2. dism /Apply-Image /imagefile:F:\sources\install.wim /index:1 /ApplyDir:W:\
    3. BCDBOOT.EXE E:\WINDOWS /S E: /F ALL
      My System SpecsSystem Spec

  5.    07 Jan 2015 #5

    adamf said: View Post
    Actually DISM works for me (on 8.1 and 10 not sure about earlier) - no need to download anything.

    1. Diskpart (clean, create partition primary, format quick fs=ntfs, active).
    2. dism /Apply-Image /imagefile:F:\sources\install.wim /index:1 /ApplyDir:W:\
    3. BCDBOOT.EXE E:\WINDOWS /S E: /F ALL
    Works for me as well - I do my multi-boot this way as well...viola!
      My System SpecsSystem Spec


  6. Joined : Oct 2013
    Posts : 1,962
    Windows 7
       07 Jan 2015 #6

    Nice alternative. But if you already have the WAIK, you might as well use it and put the imagex.exe on the desktop. Then it is only 2 commands - e.g.:

    "C:\Users\Your Name\Desktop\imagex.exe" /apply H:\sources\install.wim 1 F:\

    bcdboot F:\windows /s F:

    Works with the .iso in a BD ROM (H here) or a real DVD.

    PS: the WAIK is a useful tool. You also need it e.g. when you want to produce a WinPE recovery CD for free Macrium. You download it when you have nothing else to do. Takes about 2 hours for the average connection.
      My System SpecsSystem Spec


  7. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,246
    Windows 10 IoT
       09 Jan 2015 #7

    I suck at this. First I tried this, Windows To Go Step by Step - TechNet Articles - United States (English) - TechNet Wiki The official Windows to utility, option 1, will not use my thumb drive because its removable media. Doing option 2, power shell commands, I get as far as, $OSPartition = New-Partition –InputObject $Disk[0] -UseMaximumSize . I get an insufficient free space error message. That I believe is because the drive is removable media and not a fixed disk.

    So then I tried what you others posted,
    1. Diskpart (clean, create partition primary, format quick fs=ntfs, active).
    2. dism /Apply-Image /imagefile:F:\sources\install.wim /index:1 /ApplyDir:W:\
    3. BCDBOOT.EXE E:\WINDOWS /S E: /F ALL
    I can boot from the thumb drive but it stalls at the Windows logo with the juggling balls. All disk activity stops and it just sits there forever. I left it running for 30 plus minutes.

    Then I tried what jimbo posted in post 1. Again seemed to work. I can boot from the drive but it stalls in the very same place. Tried it on my desktop with normal BIOS and my laptop with UEFI.

    The thumb drive is a Kingston HyperX 65 GB USB 3.0 drive. Tried it in a USB 2.0 port on my desktop PC and a USB 2.0 and a USB 3.0 port on my laptop.

    I just can't get there from here? If I use my old laptop drive in an external enclosure I have no issues creating a Windows To go drive from 8.1 Enterprise. It's just bulky and slow. It would have been nice to use my thumb drive that is a lot more pocket friendly.
      My System SpecsSystem Spec


  8. Joined : Oct 2013
    Posts : 1,962
    Windows 7
       09 Jan 2015 #8

    I can boot from the thumb drive but it stalls at the Windows logo with the juggling balls
    Did you disable secure boot and set the BIOS to legacy mode ??
      My System SpecsSystem Spec


  9. Joined : Nov 2013
    Posts : 804
    10 Pro Preview x64
       10 Jan 2015 #9

    whs, Jimbo and I are only suggesting different ways to copy the .wim to your drive. The end result is the same (I've also made my USB stick a RAW disk and installed via VirtualBox which is again the same).

    Via USB2 no thumb drives seem usable to me. I've used a USB2 HDD and it was (just about) OK. I don't own a USB3 stick but it should be better (you would like to think). If I use a decent SD card (on my mac host) it is OKish.

    If your boot is halting try rebooting a few times. If that doesn't work you are most likely having a problem with a screen driver which I'm afraid I don't know about.
      My System SpecsSystem Spec

  10.    10 Jan 2015 #10

    Hi there.

    Actually an old laptop HDD (I replaced the laptops HDD with an SSD) works brilliantly for a Windows to Go -- I use a USB2==>SATA connector to connect the USB drive to the computer --perfectly fast enough even to run SKY GO to watch SKY SPORTS / SKY MOVIES from the Internet.

    A USB3 ==>SATA connector on a USB3 port would work even better.

    A 2.5 inch 320 GB laptop drive is almost as portable as a USB stick and much more durable (and robust). You can even get a 1TB laptop HDD for probably cheaper than a 64 GB USB 3 stick !!!!.

    You don't need any caddies etc and its very portable. The USB2 / 3 -->SATA cables only cost a few pence / cents / eurocents.

    Cheers
    jimbo
      My System SpecsSystem Spec


 
Page 1 of 3 123 LastLast


Similar Threads
Thread Forum
Windows 10 Enterprise LTSB (64-bit) when will it be available?
Good Day! Does anyone know when Windows 10 Enterprise LTSB (64-bit) and (32-bit) Versions will be available in the near future on MSDN or on the MS Enterprise Partners Servers? I been searching and no such luck for a version of Windows 10...
General Support
Solved Windows 10 10162 Enterprise ISO
How do I get an Enterprise ISO for Windows 10 10162? Can only find Pro for UK Can you update Pro to Enterprise? Sorted it. ISO downloading. 10074.0.150424-1350.FBL_IMPRESSIVE_CLIENTENTERPRISE_VOL_X64FRE_EN-GB.ISO Logged into account and...
Installation and Setup
Windows 10 for Enterprise: More secure and up to date
Source: http://blogs.windows.com/business/2015/01/30/windows-10-for-enterprise-more-secure-and-up-to-date/
Windows 10 News
Windows 8.1 Enterprise -- Now switching to W10
Hi there Now that I can run Win 10 at least until OCTOBER (build 9926 extends till oct 1st) I am ditching my Win 8.1 Enterprise system -- was an old TechNet copy anyway. Windows 8.1 while better than 8 isn't going anywhere either. The only...
General Support
Windows 10 Enterprise build 9879 ISO now available
The next version of Windows is engineered for the way you live and work, protected against cyber risks and threats, and managed for continuous innovation. Need more information? See what's new in Windows 10 Technical Preview for Enterprise. ...
Windows 10 News
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 22:17.
Find Us
Twitter Facebook Google+



Windows 10 Forums