Page 4 of 5 FirstFirst ... 2345 LastLast

  1. Joined : Jun 2015
    Posts : 1,613
    Windows 3.1 to Windows 10
       13 Nov 2015 #31

    Yes, I was just curious if a computer could have Home and Pro activations stored at the same time
    that I knew...

    if the Pro generic key would upgrade the Home version
    That I did not... But good to know

    Either way the PC, First, needed the digital entitlement for windows 10 pro
      My System SpecsSystem Spec


  2. Joined : Sep 2014
    Posts : 98
    Windows 10 Pro 64-bit
       14 Nov 2015 #32

    I was trying to do this, and used the listed method in a different order. I used the generic key in the Change Product Key window, and it upgraded my computer to Windows 10 Pro, even though I have never had a Pro version of any Windows OS on this PC. After the computer restarted it told me that Windows was not activated. I was then able to use my Windows 7 key to activate it. So, it is certainly possible without having the entitlement before hand.
      My System SpecsSystem Spec

  3.    14 Nov 2015 #33

    As a test I just went from activated 1511 version of Pro to Enterprise (using generic key NPPR9-FWDCX-D2C8J-H872K-2YT43). It wasn't activated after of course but worked fine.

    Putting in either the Home generic key (where I don't have digital entitlement) or Pro (where I do) failed with 0xc004f014 so it seems to be a one way trip to enterprise. Had to restore back. In the old pre-RTM previews you could switch versions at will.
      My System SpecsSystem Spec


  4. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,246
    Windows 10 IoT
       14 Nov 2015 #34

    Yeah, activation isn't checked until the upgrade to the new edition is finished and the PC reboots. The first check just verifies the key is a valid key for that edition. It's also a one way trip, can go up, but not down. Windows 8 is the same way. You can go from Core to Pro but not back. Then add Media Center to Pro. A few got caught out with e-bay MC keys that wouldn't activate. Then had to reinstall to go back to Pro and get legal again.
      My System SpecsSystem Spec


  5. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,246
    Windows 10 IoT
       14 Nov 2015 #35

    Just did a clean install on my wife's laptop. I used a stock unmodified ISO as a test. I started the install, went to custom and deleted all the partitions so there was no trace of a previous OS. Quit the install and started over from scratch with a blank hard drive. I was not asked to chose Home or Pro and not asked to enter a key. 10 Home was installed by default and activated. Checking activation it states it activated with a digital entitlement. This PC was running 10 Pro with a digital entitlement before I wiped the drive. It looks like it read and used the Windows 8.0 Core OEM embedded key. 10 Home was never installed or activated on this laptop. Just a heads up for those doing a clean install on a blank hard drive. showkey shows the installed key as the 10 Home generic key. And lists the 8.0 OEM key. I just entered the generic Pro key and its upgrading. I'll post back when done and I check activation again.

    EDIT: Upgraded and activated without issue. Activation shows activated with a Digital Entitlement. Settings > Update & Security > Activation
      My System SpecsSystem Spec


  6. Joined : Nov 2015
    Posts : 13
    Windows 10
       14 Nov 2015 #36

    Petey7 said: View Post
    I was trying to do this, and used the listed method in a different order. I used the generic key in the Change Product Key window, and it upgraded my computer to Windows 10 Pro, even though I have never had a Pro version of any Windows OS on this PC. After the computer restarted it told me that Windows was not activated. I was then able to use my Windows 7 key to activate it. So, it is certainly possible without having the entitlement before hand.
    Cool! An even simpler solution. I was on the phone with 3 different MS support representatives and all of them assured me that I could not do what I was trying to accomplish. Thanks guys!
      My System SpecsSystem Spec


  7. Joined : Sep 2015
    Posts : 2,096
    Windows 10 Pro 64-bit 1607 (AE build 14393.693)
       14 Nov 2015 #37

    So it is not an one step installation to Pro, you have to go to Home first (if both versions are registered on the same computer), but at least it works and it is free. Good to know.
      My System SpecsSystem Spec


  8. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,246
    Windows 10 IoT
       14 Nov 2015 #38

    spapakons said: View Post
    So it is not an one step installation to Pro, you have to go to Home first (if both versions are registered on the same computer), but at least it works and it is free. Good to know.
    Adding a PID.txt file to the sources folder with the generic 10 Pro key will install Pro by default and bypass any OEM key detection. I've been doing it in Windows 8, 8.1 and 10. If I don't Windows 8.1 Core gets installed on my laptop and I have to then upgrade to Pro. In Windows 8.1 the PID.txt file had my MSDN 8.1 Pro key in it. My laptop has an 8.0 Core OEM embedded key in the BIOS. My MSDN ISO's will detect it and use it automatically unless I add a PID.txt file.
      My System SpecsSystem Spec


  9. Joined : Jul 2015
    Posts : 6,896
    Windows 10 Pro
       14 Nov 2015 #39

    alphanumeric said: View Post
    Adding a PID.txt file to the sources folder with the generic 10 Pro key will install Pro by default and bypass any OEM key detection. I've been doing it in Windows 8, 8.1 and 10. If I don't Windows 8.1 Core gets installed on my laptop and I have to then upgrade to Pro. In Windows 8.1 the PID.txt file had my MSDN 8.1 Pro key in it. My laptop has an 8.0 Core OEM embedded key in the BIOS. My MSDN ISO's will detect it and use it automatically unless I add a PID.txt file.
    Also very good info to know!
      My System SpecsSystem Spec

  10.    14 Nov 2015 #40

    alphanumeric said: View Post
    My MSDN ISO's will detect it and use it automatically unless I add a PID.txt file.
    Or you can use ei.cfg Windows Setup Edition Configuration and Product ID Files (EI.cfg and PID.txt)
      My System SpecsSystem Spec


 
Page 4 of 5 FirstFirst ... 2345 LastLast


Similar Threads
Thread Forum
Solved Black screen with cursor after upgrade from 7 ultimate to 10
I upgraded from windows 7 ultimate to windows 10. It seemed to install okay and asked me to log on and select setup preferences, which I did. I left it alone to finish setup and it went to sleep. Now I only get a black screen with an active cursor....
Installation and Setup
Solved Win 10 (from 7 Ultimate) upgrade wants to wipe all settings
When upgrading I get"windows version is on a not supported folder" and all other settings greyed out but clean install. My C drive is on a SSD. Using MediaCreation tool . Tried various things...
Installation and Setup
Can I use Win 7 Ultimate Key to upgrade new Win 8.1 PC to Win 10 Pro
I'm new to the forum, and looking for some guidance. I've read a lot of the categories re updating to Windows 10 and am still somewhat confused at how I should proceed given my setup. I have a new Dell 3000 (Inspiron 3847) which was shipped with...
Installation and Setup
7 Ultimate Upgrade to 10 Pro followed by clean install.
I upgraded my wife's PC from 7 Ultimate to 10 Pro skipping the Product Key input screens. The 10 Pro activated. I then clean installed 10 Pro skipping the Product Key input screens and it activated. Interesting fact, the clean install didn't show...
Installation and Setup
Should I upgrade hardware before upgrading 7 Ultimate x64 to 10?
Hi all, I've been contemplating upgrading my current hardware (see profile for details) for the past few months. Now that Windows 10 is being rolled out I've read that changing hardware will cause Windows to re-activate but people have had...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 20:21.
Find Us
Twitter Facebook Google+



Windows 10 Forums