Page 3 of 4 FirstFirst 1234 LastLast

  1. Joined : Jun 2015
    Posts : 1,613
    Windows 3.1 to Windows 10
       14 Jun 2016 #21

    OS does not matter - if used x64 - it would boot legacy x64....

    The certified drives recommend by MS are actually flagged as fixed drives and can contain 2 partitions (Fat32 boot and NTFS)

    The other reason is you need a VLK if moving between different hosts.. thus the E & E requirement..

    None of these requirements apply to WinPESE, thus it's development.....
      My System SpecsSystem Spec


  2. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,239
    Windows 10 IoT
       14 Jun 2016 #22

    Kyhi said: View Post
    OS does not matter - if used x64 - it would boot legacy x64....

    The certified drives recommend by MS are actually flagged as fixed drives and can contain 2 partitions (Fat32 boot and NTFS)

    The other reason is you need a VLK if moving between different hosts.. thus the E & E requirement..

    None of these requirements apply to WinPESE, thus it's development.....
    Ok, good to know. I will be trying this today at some point. I have MAK keys for Pro, Education and Enterprise. I'm thinking Education or Enterprise.
      My System SpecsSystem Spec


  3. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,239
    Windows 10 IoT
       14 Jun 2016 #23

    Appling image 1.0%, time to go do some chores and just let it do its thing. I'd do the official WTG if the certified drives weren't so expensive. I've done it on an old laptop drive in an enclosure in the past. WTG will accept that clunker. Carrying a thumb drive in my pocket is a lot easier though.
      My System SpecsSystem Spec


  4. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,239
    Windows 10 IoT
       14 Jun 2016 #24

    Ran some errands around town and just left it running. It's done now, haven't tried to boot from it yet. I have some other things on the go at the moment. Will have to try it latter on.
      My System SpecsSystem Spec


  5. Joined : Jun 2015
    Posts : 1,613
    Windows 3.1 to Windows 10
       14 Jun 2016 #25

    And Here You Have It - Windows 10 on a cheap $10 dollar 32GB USB Stick, with just two commands.....
    It is very very slow to get though all the initial screens.. But wait for it, wait for it some more, and just let it finish..

    so much for my guide............
    As it is just two commands and a lot of time, to prove my experience......
    KYHI

    Click image for larger version. 

Name:	2016-06-14_105721.png 
Views:	1 
Size:	124.1 KB 
ID:	85061

    Sorry For Spoiling the Topic....
    But felt there was a need to prove something after reading several threads about Windows To Go and several more about VHD creation...

    EDIT: You could even Prepare your Windows Image (Install.wim) by adding drivers and product key BEFORE applying the image to USB or VHD using my custom script written just for that purpose...
    Image Prep also supports the use of Multi-Index Encrypted ESD Files..

    IMAGE PREP
    download
    Last edited by Kyhi; 14 Jun 2016 at 10:47.
      My System SpecsSystem Spec


  6. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,239
    Windows 10 IoT
       14 Jun 2016 #26

    Mine wouldn't boot on the PC I created it on? Legacy BIOS. It showed in the quick boot menu, looked like it tried to boot from it, but after a short delay it went on to my default boot option. Disk management shows Healthy (Primary Partition). Do I need to mark it as active or something?
      My System SpecsSystem Spec


  7. Joined : Jun 2015
    Posts : 1,613
    Windows 3.1 to Windows 10
       14 Jun 2016 #27

    the usb should be marked as active
      My System SpecsSystem Spec


  8. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,239
    Windows 10 IoT
       14 Jun 2016 #28

    It's not marked active. I'll start over again latter on. Other stuff on the go at the moment.
      My System SpecsSystem Spec


  9. Joined : Jun 2015
    Posts : 1,613
    Windows 3.1 to Windows 10
       14 Jun 2016 #29

    diskpart
    list disk
    select disk # (usb)
    select Partition 1
    active
    exit
      My System SpecsSystem Spec


  10. Joined : Dec 2013
    Sydney, Nova Scotia, Canada
    Posts : 8,239
    Windows 10 IoT
       15 Jun 2016 #30

    Did that. Took forever to boot up. It gets as far as the circle of dots under the logo. I left it running and it just sat on that screen all night. I'm not pursuing it any further. For the time being anyway.
      My System SpecsSystem Spec


 
Page 3 of 4 FirstFirst 1234 LastLast

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 03:40.
Find Us
Twitter Facebook Google+



Windows 10 Forums