1. Joined : Aug 2015
    Posts : 123
    Windows 10 Pro 64bit
       28 Aug 2015 #1

    Formatting an SSD without using Quick Format Option


    Hey all,

    I know that it is advised that one should not format a SSD without the Quick Format option enabled.

    However I want to start with a completely clean SSD. This is not my C drive (Windows 10) but rather a second SSD used for certain applications. Question is, will doing this degrade the SSD's performance (i.e. speed and efficiency) or only theoretically reduce it's lifespan by one read/write process?

    Thanks in advance.
      My System SpecsSystem Spec


  2. Joined : Jul 2015
    Posts : 266
    Windows 10
       28 Aug 2015 #2

    This process will degrade the performance of your SSD. Unlike hard drives where new information is written directly over old information with no decline in speed. SSD's are blazingly fast when writing to empty NAND. However if there is no empty NAND available the SSD process changes to a two-step approach where the NAND has to be "cleaned" and then written to. This slows down the SSD considerably. (The trim command under the windows optimize function essentially identifies the old, not needed, information and assists the SSD in pre-cleaning the NAND's so that the SSD can operate at full speed).
    The only way to completely clean SSD is through a process known as secure erase. It essentially provides a blank SSD to write on. Formatting is nothing like that and a quick format essentially clears the record of the information that is written on an SSD so that Windows can treat it like a blank SSD, but the SSD still has to go through the two-step process. The NAND's are still full of old information and are effectively cleaned during periods of non-activity. A full format on the other hand will effectively write on every single NAND completely filling the SSD. If you want to start off with a clean fast SSD, use the manufacturers software and/or other generic software designed to secure erase the SSD.
      My System SpecsSystem Spec


  3. Joined : Aug 2015
    Posts : 123
    Windows 10 Pro 64bit
       28 Aug 2015 #3

    Thanks Snakeyes, appreciate the detailed response, makes sense. Will check what SSD software is available for my disc.
      My System SpecsSystem Spec


  4. Joined : Jul 2015
    Posts : 266
    Windows 10
       28 Aug 2015 #4

    Post the name of your SSD and I might be able to help you find the appropriate software.
      My System SpecsSystem Spec


  5. Joined : Aug 2015
    Posts : 123
    Windows 10 Pro 64bit
       29 Aug 2015 #5

    I've got two SSD's:
    Samsung Evo840 500GB - C: with Windows 10 Pro already installed
    Sandisk Ultra Plus 250GB - F: needs a 'clean'

    I do Have Samsung Magician for the EVO840 but the Sandisc never came with software as far as I can remember.

    I also have a 1.5TB Seagate Barracuda 7200rpm HDD drive but I guess these are just taken care of thru Windows?

    Thanks!
      My System SpecsSystem Spec


  6. Joined : Jul 2015
    Posts : 266
    Windows 10
       29 Aug 2015 #6

    You can download the SanDisk SSD Dashboard here.

    SanDisk SSD Dashboard Support Information

    Windows 10 will take care of your HHD. Nice SSD's
      My System SpecsSystem Spec

  7.    29 Aug 2015 #7

    You might find this article useful.
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
Lost installation of windows 10 after formatting the other drive
Hello everyone, I have 2 seperated (physically) SSD drives in my laptop. Previously I had windows 8.1 on one drive, and I installed windows 7 and upgraded it to windows 10 on the other SSD drive. I enjoyed windows 10, so I formatted the drive...
Installation and Setup
Need formatting tool for 10 Install
I've got a brand new Acer R3-131T for upgrade. Got it from a customer, a Walmart item. At first glance, I thought a mistake was made since I've never seen a PC shipped with a 32GB HDD since before Windows 3.1. Anyway, I couldn't do the Upgrade...
Installation and Setup
Windows 10 Upgrade - Secondary drives formatting advice
Good day all, hope everyone is well! I'm getting ready to take the plunge and upgrade from Windows 7 to 10. Now the plan is to format my SSD with my OS and the like on but my question is will I have to format my two 1TB drives? There's about...
Installation and Setup
Solved Can't format a partition in win 10 TP
hey there, can anybody please tell me why I can't format a normal data partition in Windows 10TP? It goes through the whole normal procedure and then gives me an error stating "Windows cannot complete the procedure". Even logged in as Administrator...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:57.
Find Us
Twitter Facebook Google+



Windows 10 Forums