1. Joined : Aug 2015
    Posts : 3
    windows 7
       13 Aug 2015 #1

    Dual Boot win7/10 questions...with clean install


    Hello,

    I recently upgraded my one laptop to windows 10 and thought I was doing a clean install but did not and wound up doing a restore that deleted everything. I downloaded windows 10 via the media creation tool in hopes of doing a clean install to my other laptop. I have windows 7 pro installed and want to dual boot windows 10 with a clean install on a different partition. Will I be able to activate windows 10 this way? I have read conflicting things that I may actually have to first upgrade windows 7 to 10, so it "activates" it. Then downgrade to 7 then install 10 on the other partition. Sorry for the long post but I want to make sure I do it right. Any help/info would be much appreciated.

    Thank you
      My System SpecsSystem Spec


  2. Joined : Oct 2014
    Posts : 839
    Windows 8.1, Win10Pro
       13 Aug 2015 #2

    Clean installs will not activate on a machine unless it has already been upgraded to Win10. In your case, since your Win7 machine has not been upgraded, the clean install will not activate. Sorry, at this point, MS is not allowing folks to activate by entering their Win7/8/8.1 key.
      My System SpecsSystem Spec


  3. Joined : Aug 2015
    Posts : 3
    windows 7
       13 Aug 2015 #3

    Mark Phelps said: View Post
    Clean installs will not activate on a machine unless it has already been upgraded to Win10. In your case, since your Win7 machine has not been upgraded, the clean install will not activate. Sorry, at this point, MS is not allowing folks to activate by entering their Win7/8/8.1 key.

    Hey thanks for the fast response. Do you think my idea about upgrading 7 to 10 then downgrading back to 7 will work?
      My System SpecsSystem Spec


  4. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       13 Aug 2015 #4

    edit: I type too slow, NavyLCDR beat me to the best answer

    The EULA does not really allow for dual booting Win7 upgraded to Win10.

    Before upgrading though, I suggest that you make a System image of your Win7 install.
    See: Backup Complete Computer - Create an Image Backup - Windows 7 Help Forums

    If you decide to 'roll back' to Win7, restore the System image instead of using the Win10 roll back to previous version.
    Don't worry about your Win10 activation status - once you've upgraded and the install is activated, the key is stored in firmware. A Clean install of Win10 can be done anytime after you've upgraded a qualifying system.

    You don't need to enter a key for a Clean install after an upgrade. There were two dialog boxes asking for a key when I Clean installed Win10 after upgrading my Win7 box.

    Both options to skip entering the key are text in the lower left area of he dialog box
    1st key dialog: press Skip this
    2nd key dialog: press Do this later

    DO NOT enter a key in those boxes, Win10 will activate using the hashed key it created and stored in firmware during the upgrade.

    But... you must upgrade first and the Win10 install must be activated for all of this to happen.
      My System SpecsSystem Spec


  5. Joined : Jul 2015
    Posts : 6,872
    Windows 10 Pro
       13 Aug 2015 #5

    Slartybart said: View Post
    DO NOT enter a key in those boxes, Win10 will activate using the hashed key it created and stored in firmware during the upgrade.
    Stored on Microsoft Activation Servers - not firmware.
      My System SpecsSystem Spec


  6. Joined : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       13 Aug 2015 #6

    NavyLCDR said: View Post
    Stored on Microsoft Activation Servers - not firmware.
    I think it's recorded in both firmware and the activation server, but could be wrong
      My System SpecsSystem Spec


  7. Joined : Aug 2015
    Posts : 3
    windows 7
       13 Aug 2015 #7

    Wow, thanks to all for the great responses. Didn't even think of cloning the drive. Thanks again.
      My System SpecsSystem Spec


  8. Joined : Apr 2014
    Posts : 3,312
    W10 Pro x64/W7 Ultimate x64 dual boot main - W10 Pro Insider Preview/W7 Pro x64 - remote pc
       14 Aug 2015 #8

    Slartybart said: View Post
    I think it's recorded in both firmware and the activation server, but could be wrong
    Both! What that actually is would be the hardware configuration data the server keeps a record of as well as being stored locally on the drive. When you call into MS following a hardware change and Windows suddenly becomes INVALID as seen plenty of times in years past you have follow the instructions in order to bring up a code of several groups of 4 digits. The operator will then have you type a new code in and zingggg. you are back!

    win10n00b said: View Post
    Wow, thanks to all for the great responses. Didn't even think of cloning the drive. Thanks again.
    Someone say "CLONE"? Only here I used Acronis True Image Home 2010 to initially clone the 7 Ultimate host drive over to the destination second OS drive intended for the dual boot of 7 with 10. The clone was up and running good while the first upgrade attempted "Failed Big Time"! EH? Then I went over things in the clean install guide figuring I was going to have to see a clean install sooner then expected first wanting to get to know 10 a bit first.

    I forgot to unplug those two storage drives and the fails were from the 10 installer placing installation folders($Windows~BT and $Windows~WS) as well as the boot files on the wrong drives! Be sure to unplug any additional non OS drives before proceeding even with the clean install! That can save a world of hurt!

    Example of what not to do? The clone itself was then to see a clean install of 7 which couldn't be booted into? Well those necessary boot files ended up on the second storage drive while the temp install folders were spotted on the first! OOPS! But first a second clean install of 7 was to go on right before a review of the guide when the warning there reminded me that 10 unlike 7 had to see those drives unplugged too in order to see the second OS drive made bootable!

    Saturday July 31 sees the upgrade over the second temporary clean of 7 go right on! But the upgrade was "BUGGY"! and subsequently saw the upgrade to repair go on a day or so afterwards and ran for the week when that while not seeing activation ran much smoother! Things actually worked and necessary drivers, programs decided to go on!
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
Dual boot Win10 with Win7 or Win 8.1 you already have on your PC
I am a computer technician and I work out of my home. I probably have a half-dozen computers. A few are running Windows 7 Home Premium, one has been set up to dual boot to Windows 7 Pro or Windows XP Pro and one has Windows 7 Pro and Windows 8.1...
Windows Updates and Activation
Will update Win7>Win10 deactivate second Win7 drive in a Dual boot?
Here's the situation. I have a 17" laptop with two Win 7 drives set up with dual boot. One is a 128gb SSD with all my work software. (AutoCad, Rhino, etc) The other is a new 256 SSD with only the Win7 OS installed. Both use the same laptop...
General Support
Microsoft Account clean install for Dual Boot Machine question.
If I do a clean install of windows 10 on a dual boot partition will it be activated with my Microsoft Account that I been using as a windows insider with a Windows 10 installation on a hyper-v machine?
Windows Updates and Activation
Solved Dual Boot Win 7 and Win 10 build 10130 questions
I am trying to get ahead of the game for my wife. We jointly have a laptop on which she uses Win 7. I wanted to try Win 10 Build 10130 ISO so installed it using the tutorial How to Dual Boot Windows 10 with Windows 7 or Windows 8 as a guide....
Installation and Setup
Dual Boot Win7 & Win10
I used the ISO (64bit) burnt to DVD, changed boot order to install and installed to a new 250GB HDD, setup was about 15 mins and the dual boot works great, Windows 10 installed fine and Windows 7 has not been affected and runs as normal :D
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:22.
Find Us
Twitter Facebook Google+



Windows 10 Forums