Page 5 of 8 FirstFirst ... 34567 ... LastLast

  1. Joined : Aug 2015
    Posts : 62
    Windows 7
       09 Aug 2015 #41

    Gary said: View Post
    Turn off your machine and re seat your GPU. I don't know what else to do. You said that Avast was off , was it removed completely?
    Yup, everything is working right now, I have it installed and this is the initial boot which never fails to start, I just know that if I restart my machine it will not boot up properly after this, now I can get into safe mode if I let the pc fail to start up a few times, and then everything still functions the same way
      My System SpecsSystem Spec


  2. Joined : Aug 2015
    Posts : 62
    Windows 7
       09 Aug 2015 #42

    Gary said: View Post
    I have requested some additional help for you. Good luck TL.
    thanks I hope it actually helps me out
      My System SpecsSystem Spec


  3. Joined : Aug 2015
    Posts : 62
    Windows 7
       09 Aug 2015 #43

    One more question, I have my computer properties pulled up and see the product ID, could I do a clean install from the windows 10 disk I have and use this product key, odds are I'll just rollback to windows 7 if we can't get this to work, but I'd like to have the option
      My System SpecsSystem Spec


  4. Joined : Jul 2015
    Posts : 133
    Windows 10
       09 Aug 2015 #44

    Belarc Advisor will give you the product key and lots more info http://www.belarc.com/free_download.html I would make another copy of Windows 10 using the iso creation tool and do a clean install after copying the product key from the Belarc report.
      My System SpecsSystem Spec


  5. Joined : Aug 2015
    Posts : 62
    Windows 7
       09 Aug 2015 #45

    See windows 10 isn't important enough to me to warrant a complete clean install and wipe everything off my computer
      My System SpecsSystem Spec


  6. Joined : Aug 2015
    Posts : 62
    Windows 7
       09 Aug 2015 #46

    I rolled back to windows 7, and it works completely fine for me, I'll try again soon enough, but I will note that the windows update opens up telling me the upgrade to windows 10 failed, error code 8007002C-4000D but it does successfully install just can never reboot
      My System SpecsSystem Spec


  7. Joined : Jul 2015
    Posts : 133
    Windows 10
       09 Aug 2015 #47

    The only other option I know to try is to contact Windows Support... http://windows.microsoft.com/en-us/w...ontact-support
      My System SpecsSystem Spec


  8. Joined : Aug 2015
    Posts : 62
    Windows 7
       09 Aug 2015 #48

    I also really don't want to try a completely clean install of 7 and then upgrade to 10 but then run into the same issue
      My System SpecsSystem Spec


  9. Joined : Jul 2015
    California
    Posts : 186
    Kernel 4.x.x
       09 Aug 2015 #49

    TimeLincoln said: View Post
    I also really don't want to try a completely clean install of 7 and then upgrade to 10 but then run into the same issue
    I had to do exactly that. It worked for me though.
    Download the ISO from here.

    Install with that, and all should be fine.
      My System SpecsSystem Spec


  10. Joined : Jul 2015
    Posts : 133
    Windows 10
       09 Aug 2015 #50

    I don't blame you but all that software you have is the most likely culprit.
      My System SpecsSystem Spec


 
Page 5 of 8 FirstFirst ... 34567 ... LastLast


Similar Threads
Thread Forum
Solved Reinstalling Windows 7 on 7/10 dual boot breaks dual boot
I installed the 10 tech preview along side my win 7 ultimate, I reinstalled, the Windows 7 side of the HDD because after however many years the OS had a LOT of clutter, and even though windows update was a nightmare I finally got all the updates...
Installation and Setup
Slow warm boot & Fast cold boot
Hello, My Lenovo laptop is pretty fast at cold boot. It takes about 12 seconds from initial bios screen to desktop. On the other hand, warm boot is really slow. The same period takes about 51 seconds, involving a long black screen. ...
Performance & Maintenance
Solved Windows 10 installation from Windows 7 Pro - BSOD after installation
Hi I have been trying to install windows 10 since launch day. However i have been somewhat unsuccessful. Win 10 installs successfully but when the computer does the setting up of Apps at its first run it crashes to BSOD -...
Installation and Setup
Dual boot installation with Win 7 + 10 -- multiple issues
I wanted to experiment with Win 10 while preserving my Win 7 x64 installation. I imaged my Win 7 to a new hdd which is formatted as GPT. I repaired the Win 7 copy using a Win 7 SP1 installation dvd and got it to boot in UEFI mode using the ...
Installation and Setup
Solved Boot Manager Status: 0xc000000f boot selection failed
Windows failed to start. A recent hardware of software change might be the cause. To fix the problem: 1.Insert your Windows installation disc and restart the computer. 2.Choose your language settings, and then click "Next". 3.Click "Repair your...
BSOD Crashes and Debugging
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:09.
Find Us
Twitter Facebook Google+



Windows 10 Forums