GPU not being detected after recent CPU installation Solved

  1. iDamn's Avatar
    Posts : 61
    Windows 10 Pro x64 (ver 1709) Build 16299.214
       03 Feb 2017 #1

    GPU not being detected after recent CPU installation


    hai,

    I used to have Pentium G2030 but I replaced it with an i5-2400 (used). The CPU installed correctly as it displayed everywhere like it should. https://i.imgur.com/ecI9cD1.png

    But, my GPU which is a GT 630 suddenly disappear. I booted up with 1024x768 resolution. In Device Manager, GT 630 is hidden and it said that it is not connected. I tried unplugging and popping it back it but to no avail. Under Display Adapter, it shows "Microsoft Basic Display Adapter" https://i.imgur.com/W6CZC7m.png

    So I used DDU, to uninstall the driver entirely with the hope I could reinstall the Nvidia Drivers but I was dead wrong. Every driver I downloaded for my GT 630, Windows 10 64-bit version ended up with getting stuck at 4% and gave me the error "7zip: Data Error".

    I tried downloading GeForce Experience, but it gave me "7zip: CRC Error".

    I'm looking forward to any solution that anyone's got to offer. Where is my GPU gone?

    p.s: tried downloading the driver from a software that was solely purposed to update missing or outdated drivers but still, error.

    any help would be appreciated. here is the BIOS if it's any concern. https://i.imgur.com/3f6H5WE.jpg
      My ComputersSystem Spec

  2. Caledon Ken's Avatar
    Posts : 11,055
    Windows 10 Pro x64 Build 1803
       03 Feb 2017 #2

    So when you replaced the CPU did you clear CMOS and allow it to discover your devices? I would suggest removing battery, holding power button for 20 seconds and then re-installing.

    Your screen shot of the BIOS with integrated graphics, can you select that and show how it is configured.

    Who made you motherboard?
      My ComputerSystem Spec

  3. iDamn's Avatar
    Posts : 61
    Windows 10 Pro x64 (ver 1709) Build 16299.214
    Thread Starter
       03 Feb 2017 #3

    I didn't do the installation, I sent it to a shop because I didn't have a thermal paste to apply, so I have no idea.

    Battery? What battery?

    Under that selection, there is a PEG and IGD. I chose the PEG as I didn't want Integrated Graphics Driver to be the default GPU. Also something about dual monitor.
      My ComputersSystem Spec

  4.    03 Feb 2017 #4

    Try reset to factory defaults as Caledon Ken suggested.
      My ComputerSystem Spec


  5. Posts : 932
    Windows 10
       03 Feb 2017 #5

    You probably need to clear the BIOS settings, depends on the MOBO, consult the manual, on mine it's a simple button. You may have to short some pins or remove the BIOS settings battery (usually a CR2032) something like that.

    Just setting defaults in the BIOS may not be enough as they were for your old Processor. There are significant differences.
      My ComputerSystem Spec

  6. Caledon Ken's Avatar
    Posts : 11,055
    Windows 10 Pro x64 Build 1803
       03 Feb 2017 #6

    and a CR2032 is round flat battery, say 20mm across and looks like a coin.
      My ComputerSystem Spec

  7. iDamn's Avatar
    Posts : 61
    Windows 10 Pro x64 (ver 1709) Build 16299.214
    Thread Starter
       03 Feb 2017 #7

    im sorry but i have no idea what you are talking about and still clueless on what should i do.

    im weak on BIOS topic

    UPDATE: fixed my problem using "Driver Talent" which downloaded all required drivers even when I couldn't do it manually cause of the errors. Happy with the result. thanks for the reply guys
    Last edited by iDamn; 03 Feb 2017 at 17:41.
      My ComputersSystem Spec


 

Related Threads
Hi all, This is my first build and I am so close yet it feels so far away. I'm at the final step of installing Windows 10 onto my PC I have a bootable USB drive connected and everything goes smoothly until I have to select a hard drive! I have...
My laptop has suddenly started running CHKDSK during startup. After it completes and finishes booting I go to Properties > Tools > Error Checking of my C drive and click “Check”. It says errors were found on this drive and to repair drive now to...
I recently got my first SSD (woo!) so I had to unfortunately go through the Windows reinstallation process. All was good, SSD gave me awesome boot times as well, until a few restarts later. Now whenever I start my PC the boot takes a bit more time...
So I read about setting display to Extend I've tried updating the graphics card, looks ok and Device Mgr sez it's working The external display, a TV, worked before on Win 7 just fine! this is: Win 10 64 bit Home was Win 7 HP Pavilion dv7...
it saids is ethernet unidentified network? no internet access sharing option is off. i try restarting the pc:( it use to work fine until the update bridging network cable
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:55.
Find Us