Windows 10: VLC and Intel VGA settings issue
Thanks a lot dear for helping me so far, it all worked well and i am very deeply thankful to you.
You talked about monitor color thingy and i recalled something which i noticed in control panel but i ignored it previously thinking to see it some later time.
There is an option "color management" and in advanced tab there are color profiles. Such as RGB, CMYK like if you work in photoshop, you would the depth of color differences. I took its screenshot to ask of you, if i do some changes to it and will it make some difference. Because i didn't want to do something and something go wrong and i can't undo it.
In addition, the monitor is glossy type laptop lcd with resolution of 1366*768 and vga is intel hd graphics 4400 chip 128mb dedicated and 2011mb page file shared memory and system specs are core i3 4010U (3M L3 cache) 4gb ram.
I would not play with the color management options in your case , they appear to be correct and with a laptop you don't have as many options anyway. The Calibrate Button you see there doesn't really help much ...for me at least .
For a laptop I would try an Online Site to set brightness, contrast and colour etc as best you can instead , and then make further adjustments in VLC , if you prefer the "brighter than life" look of saturated colors.
I used to use this online test before i purchased a colorimeter.
LCD monitor test images
or Download the executable file here and run it on the laptop
:: Online Monitor test - Your free online TV and monitor test tool - By vanity.dk and flatpanels.dk
I notice under my WiFi connection properties there is a tick box to use Intel Connection Settings and a Configure button. What are the advantages (if any) of using this and what are the recommended settings? I'm only sing 2.4GHz WiFi at present.
Hi guys. Just wondering if anyone has an issue similar to mine or know what is wrong. I have an i7 processor 3770k 4 cores and 8 threads.
Whenever I use a certain program to convert files )using ConvertX), after the program has closed down...
I've been getting this issue since I updated my motherboard BIOS from it's initial version, which I'm going to assume was F4 as it's been a while but I truly don't remember, to F7 and an F8a BIOS Gigabyte support gave me to try and resolve issues...
I upgraded to Win 10 from 8.1 with RST version 18.104.22.1683. I have two RAID arrays on the Intel MB controller, a 2-SSD RAID 0 for the system and a 4-SSD RAID 10 for data. I sometimes experienced system freezing when mucking with the write cache...
My Switchable Graphics option is there but I cannot configure it at all. I have tried modded drivers, original drivers and running with compatibility settings.
For some reason when I select Configure Switchable Graphics it takes me to the...