Page 2 of 4 FirstFirst 1234 LastLast
  1.    03 Nov 2015 #11
    Join Date : Jun 2015
    San Antonio, TX
    Posts : 2,344
    MS Windows 10 Pro - Perm Activation of 10585

    Quote Originally Posted by Bill413 View Post
    Thanks UKMedia,

    I have two NVIDIA GeForce GT 630 cards, with I hope, NVIDIA Windows 10 v358.50 driver.

    Today it was running fine with four screens, acer V233w, full of charts from Ninja Trader, when the trading market opened at 9:30 it all crashed. I couldn't even power off.
    thanks for your time.

    IT will really be interesting to learn why the other two are ot working... tks best2u
      My ComputerSystem Spec
  2.    04 Nov 2015 #12
    Join Date : Aug 2015
    Wales
    Posts : 170
    Win 10 Pro 64Bit

    Quote Originally Posted by Bill413 View Post
    Thanks UKMedia,

    I have two NVIDIA GeForce GT 630 cards, with I hope, NVIDIA Windows 10 v358.50 driver.

    Today it was running fine with four screens, acer V233w, full of charts from Ninja Trader, when the trading market opened at 9:30 it all crashed. I couldn't even power off.
    thanks for your time.
    Sorry to hear that and when they crash are you able to check Device Manager?

    Also, have you tried un-installing the drivers, rebooting and then clean installing the latest driver?

    Regards
    UKMedia
      My ComputerSystem Spec
  3.    04 Nov 2015 #13
    Join Date : Aug 2015
    Posts : 29
    Win 10 Pro 64bit
    Thread Starter

    Error code 31!


    Crashed again today, this time with no programs running, just four blank screens.

    In Device Manager I did notice however an ERROR CODE 31! Ya some clue.
    "This device is not working properly because Windows cannot load the drivers required for the device (Code 31)

    And actually two screens work and the driver is working for those two. It's the same driver and the two video cards are the same NVIDIA GeForce GT 630s.

    P.S. Oh yes I have been unistalling the drivers, rebooting, and reinstalling NVIDIA's latest, bestist, Windows 10 driver.

    I'm getting the idea Windows 10 does not like more than one driver.
      My ComputerSystem Spec
  4.    04 Nov 2015 #14
    Join Date : Aug 2015
    Wales
    Posts : 170
    Win 10 Pro 64Bit

    Quote Originally Posted by Bill413 View Post
    Crashed again today, this time with no programs running, just four blank screens.

    In Device Manager I did notice however an ERROR CODE 31! Ya some clue.
    "This device is not working properly because Windows cannot load the drivers required for the device (Code 31)

    And actually two screens work and the driver is working for those two. It's the same driver and the two video cards are the same NVIDIA GeForce GT 630s.

    P.S. Oh yes I have been unistalling the drivers, rebooting, and reinstalling NVIDIA's latest, bestist, Windows 10 driver.

    I'm getting the idea Windows 10 does not like more than one driver.
    Have you tried running SFC /Scannow in an Admin Command Prompt window?
      My ComputerSystem Spec
  5.    04 Nov 2015 #15
    Join Date : Aug 2015
    Wales
    Posts : 170
    Win 10 Pro 64Bit

    Also, if you disable the card that remains working within Device Manager, does the other card then work okay?
      My ComputerSystem Spec
  6.    04 Nov 2015 #16
    Join Date : Mar 2015
    Posts : 616
    Windows 10

    Both Nvidia's & AMD's Windows 10 SLI support is iffy at best, so you may be just SOL until drivers are more stable.
    In the meantime, you might try uninstalling the drivers with DDU and reinstalling them (from Nvidia, not Windows Update) to see if that gives you any better stability.
      My ComputerSystem Spec
  7.    04 Nov 2015 #17
    Join Date : Aug 2015
    Posts : 29
    Win 10 Pro 64bit
    Thread Starter

    Have you tried running SFC /Scannow in an Admin Command Prompt window? Thanks UKMedia , that was quite above my IT skill level but I did it...
    Windows Resource Protection did not find any integrity violations
    -Also, if you disable the card that remains working within Device Manager, does the other card then work okay?
    Well there's just one listed now and two screens, but I did disable it anyway with apparent affect. At some point it will reboot with all four monitors and the two video cards. Then maybe I can try that. Currently the NVIDIA driver (from their website fracking4oil) gets replaced by some basic Windows driver.

    In the meantime, you might try uninstalling the drivers with DDU and reinstalling them (from Nvidia, not Windows Update) to see if that gives you any better stability. thanks fracking4oil I'll try it in awhile.


    W
      My ComputerSystem Spec
  8.    04 Nov 2015 #18
    Join Date : Aug 2015
    Posts : 29
    Win 10 Pro 64bit
    Thread Starter

    -Also, if you disable the card that remains working within Device Manager,
    First there's 2 monitors on and one Display Adapter listed instead of two before. So I disable it and one monitor goes out. ?
    These two remaining monitors plug into the same Video Card.

    Ha ha, so after awhile I booted up to two screens, but with two video cards in Device Mgr.
    One VC not working properly. I disabled the working VC and lost a screen, down to one screen, one not working VC and one disabled VC! Not sure what it's doing for a driver.
    Last edited by Bill413; 04 Nov 2015 at 15:13.
      My ComputerSystem Spec
  9.    05 Nov 2015 #19
    Join Date : Aug 2015
    Wales
    Posts : 170
    Win 10 Pro 64Bit

    When you disable the card, it is probably using the Basic Windows Video driver.

    If you right click on the background and open the Nvidia Control Panel, can you show me the screen below, using the Sniping tool?
    Click image for larger version. 

Name:	Capture3.PNG 
Views:	3 
Size:	72.2 KB 
ID:	46367
    and
    Click image for larger version. 

Name:	Capture4.PNG 
Views:	3 
Size:	80.6 KB 
ID:	46368

    Regards
    UKMedia
      My ComputerSystem Spec
  10.    05 Nov 2015 #20
    Join Date : Aug 2015
    Posts : 29
    Win 10 Pro 64bit
    Thread Starter

    the snipping I took blew up and I had to delete it. I'll try saving them and posting.

    Click image for larger version. 

Name:	Nvidia1.PNG 
Views:	4 
Size:	65.3 KB 
ID:	46400
    Click image for larger version. 

Name:	Nvidia2.PNG 
Views:	4 
Size:	60.6 KB 
ID:	46401

    Oh and I still have run anything I want to save as Administrator even though it says I am!

    It should see four monitors.
      My ComputerSystem Spec

 
Page 2 of 4 FirstFirst 1234 LastLast


Similar Threads
Thread Forum
Solved New Update today BEWARE!
I just did the latest update. At least it was for me. Low and behold Microsoft decided to install a little EXTRA DRM on me without notice. It's a file called Au.exe and was in the temp folder. The actual program name is Online Games Manager...
Windows Updates and Activation
Dual Monitors not working with update
i was previously on windows 8.1 and i had my dual monitors working just fine, after i upgraded to windows 10 my second monitor (wired with hdmi) doesnt work but the one with Dvi does
Graphic Cards
Solved Line showing outside Action Center after big update today (8/5/2015)
I don't remember this line being there. After the PC restarted I now have it every time I open the Action Center. Any others have it too?
General Support
New update package on Windows Update for PC build 10240 today
622153285609218048 622153799453401088 622154407015116801 UPDATE: KB3074665 update now available, and requires restart. How to Check for and Install Windows Updates in Windows 10
Windows 10 News
Insider Windows 10 Insider Preview KB3062095 Update Rollup Today
New Rollup Update for Win 10.... KB3062095 Windows 10 Insider Preview Update Rollup: May 5, 2015
Windows 10 News
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 09:14.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums