1.    29 Aug 2015 #1
    Join Date : Aug 2015
    Posts : 2
    windows 10

    my monitor not working anymore

    installed the win 10 on my pc . been working pretty good . but now the monitor does not work anymore . pc boots up , but monitor is still in sleep mode . i have tried shutting down hard and nothing . pressing all configures of buttons and still nothing . changed dvi cords . tried pwr button on monitor . i did plug in monitor thru laptop and dooes work , but just not with pc .
    any ideas
      My ComputerSystem Spec
  2.    29 Aug 2015 #2
    Join Date : Jul 2015
    Posts : 9,552
    Windows 10 Pro

    Do you see the Bios splash screen when you first start the computer? The Bios splash screen has nothing to do with the operating system. If you don't see the Bios screen at all then you have a hardware failure.
      My ComputerSystem Spec
  3.    29 Aug 2015 #3
    Join Date : Aug 2015
    Posts : 2
    windows 10
    Thread Starter

    Quote Originally Posted by NavyLCDR View Post
    Do you see the Bios splash screen when you first start the computer? The Bios splash screen has nothing to do with the operating system. If you don't see the Bios screen at all then you have a hardware failure.
    No i do not see the bios splash . I thought about that also about hardware failure . Ok then so what to do now ?
      My ComputerSystem Spec
  4.    29 Aug 2015 #4
    Join Date : Jul 2015
    Posts : 615
    Windows 10 Enterprise x64 (build 10586)

    Reset the CMOS, which might be kinda tricky. Be prepared to open up the computer. Tthis happens to me sometimes, and a CMOS reset always fixes it. It could possibly be a corrupt BIOS which is either very easy or a little tricky to fix depending on your computer manufacturer (some companies such as HP have BIOS recovery processes that are easy to do), or a hardware failure in the worst-case scenario. For example, with most HP notebooks, you simply have to hold the Windows and B keys while it is off, then press the power button for one second and let go of the keys, and the computer will eventually boot into a BIOS recovery program.

    How to Clear Your Computers CMOS to Reset BIOS Settings

    Do either "Use the CLEAR CMOS Motherboard Jumper" or "Reseat the CMOS Battery".

    This will set the BIOS settings to their defaults. That's normally not an issue, but if you have a specific computer setup then you might have to reconfigure some stuff. If you bought your computer and just use it, if you know what I mean, you should be fine and won't have to change any settings.
      My ComputerSystem Spec
  5.    29 Aug 2015 #5
    Join Date : Sep 2014
    Posts : 16
    Windows 10

    I used to have problems with windows 10 detecting my monitors as well when i was on the betas. Only time I got it to work was when I switch around the cables and then when my monitor went to sleep, it stopped turning on. Had to revert back to Windows 8.1. I was using a tri-monitor setup so it was kind of annoying dealing with it over and over.
      My ComputerSystem Spec
  6.    01 Sep 2015 #6
    Join Date : Sep 2015
    Posts : 1
    Windows 10 Pro - 64 bit

    Not sure my problem is the same with everyone else here, but didn't find the same issue though similar. After installing the 10, everything is working fine except when the system goes to sleep and when I try to resume, the monitor is not responding, remaining sleep. When I use the monitor's switch, I see a message briefly warning me the monitor is going to the sleep mode. Only way I can get back is to force reboot each time. Please help.
      My ComputerSystem Spec


Similar Threads
Thread Forum
USB DisplayLink monitor or mDP not working
I have a Surface Pro 3 i5/4300U with two mDP monitors, one plugged in directly and one plugged in to the dock and then I have a USB adapter using DisplayLink with an adapter converting it to DiV connector. This setup has worked just fine for a long...
Graphic Cards
Hey Cortana not working anymore on windows 10
I was able to turn on the "Hey Cortana" feature when I first installed windows 10 yesterday morning. but at night, i tried to use it again, and it stopped working. I played around with the privacy settings, could that effect it? any help will be...
Software and Apps
3rd monitor not working after 10041 update
I was running tri-monitors on 9926 and then I upgraded to 10041 and now the 3rd monitor isn't working. I have 2 monitors that's connected to my gtx 980 and the 3rd monitor connect to my motherboard. It worked before the update and now it doesn't...
Graphic Cards
IE not working correct anymore
hi guys, in Win8, later Win10, when closing the screen i was asked if i wanted to close all screens or just one. Most of the time i could not use the back key. But now when i close the screen (not having the possibility to go back), IE is...
Browsers and Email
4 X Monitor users - Trading software working anybody
Hi there I don't know if we have any Stock traders here - whether PRO or part time (day trading etc) - if so how do you set up 4 monitors for using trading software on Win 10 -- anybody done this yet !!!. I'm looking for a decent trading...
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:41.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App

Windows 10 Forums