New
#1
W10 wants his graphic card !!
Hi !
I have a strange problem (in fact the opposite of most cases on the forums!): If I remove the graphics card and connect the monitor to the graphics output of the MB, w10 refuses to boot, it will puts on "automatic repair", turns off and it starts again.
I first thought it came from bios, actually the "detection graphics" option was on "auto", so I put "internal graphic" on "enable" .. it didn't change anything, except that I was able to put two screens, the new one (4k) on the output of the mb in hdmi,
and the old one on its graphics card (in fact the output of the MB is better than the old card!, that's why I wanted to remove it)
There I was able to boot w10, and I put my new screen in main, uninstalled the old one, uninstalled the GC and its drivers ... turned off and dismantled the GC.
In terms of bios, no problem but as soon as W10 launches, it reboots continuously, sometimes with "automatic repair" ...
It looks like windows has memorized once and for all that it should boot on the GC! Besides, with the two-screen config, that's what it does, it boots on the CG and after, it puts the requested config with the output of the MB on the main screen.
And also, impossible to have my main screen (MB output) in N ° 1, it is always spotted by windows as N ° 2
I would like to remove this GC and the old screen, but impossible !!
Ideas would be welcome !!
Proc: Intel Skylake Core i7-6700K processor 4.2 GHz 8MB
MB: Gigabyte GA-Z170X-Gaming 7 ATX