Page 2 of 4 FirstFirst 1234 LastLast

  1. Joined : Aug 2015
    Posts : 3
    win 10
       16 Aug 2015 #11

    Just yesterday got the exact same problem in windows 10 after i installed nvidia's newest driver 355.60.
    The second monitor gives "no signal" message no matter where i plug it in the video card even when i switched cables with the other monitor. It's the asus vg248qe by the way.
      My System SpecsSystem Spec


  2. Joined : Aug 2015
    Posts : 18
    Windows 10
       16 Aug 2015 #12

    I still haven't been able to fix this problem so unfortunately I can't help, what graphics card are you using?
      My System SpecsSystem Spec


  3. Joined : Aug 2015
    Posts : 3
    win 10
       16 Aug 2015 #13

    halotigerkil said: View Post
    I still haven't been able to fix this problem so unfortunately I can't help, what graphics card are you using?
    I'm using a titan x. Thanks for taking the time to reply to my message, i hope this gets fixed in a newer windows build or nvidia driver..
      My System SpecsSystem Spec


  4. Joined : Aug 2015
    Wales
    Posts : 167
    Win 10 Pro 64Bit
       17 Aug 2015 #14

    halotigerkil said: View Post
    I still haven't been able to fix this problem so unfortunately I can't help, what graphics card are you using?
    Did you try with the Win 8 driver?
      My System SpecsSystem Spec


  5. Joined : Aug 2015
    Posts : 18
    Windows 10
       17 Aug 2015 #15

    I haven't because I was a bit frustrated after trying so many things and it not working but I'll try now.
      My System SpecsSystem Spec


  6. Joined : Aug 2015
    Posts : 18
    Windows 10
       17 Aug 2015 #16

    It simply says this nvidia graphics driver is not compatible with this version of windows.
      My System SpecsSystem Spec


  7. Joined : Aug 2015
    Wales
    Posts : 167
    Win 10 Pro 64Bit
       17 Aug 2015 #17

    halotigerkil said: View Post
    It simply says this nvidia graphics driver is not compatible with this version of windows.
    Hi

    Can you shut down your PC and remove the power cable for about 1 min. Then reconnect and restart the PC, does you second monitor work okay - you may need to press the Windows key and P again?

    Regards
    UKMedia
      My System SpecsSystem Spec


  8. Joined : Aug 2015
    Posts : 18
    Windows 10
       20 Aug 2015 #18

    No change after unplugging it for well over a minute.
      My System SpecsSystem Spec


  9. Joined : Aug 2015
    Posts : 3
    win 10
       23 Aug 2015 #19

    I upgraded windows 10 to the latest build and still have the same problem. I think it was after i installed the latest nvidia driver the problem showed up. But i cannot understand how reverting to an older driver doesn't fix the problem.
      My System SpecsSystem Spec


  10. Joined : Aug 2015
    Posts : 18
    Windows 10
       23 Aug 2015 #20

    have you tried rolling back to a previous driver through the windows device manager rather than downloading an old one from online?
      My System SpecsSystem Spec


 
Page 2 of 4 FirstFirst 1234 LastLast


Similar Threads
Thread Forum
No signal after installed windows 10
Hey, last night i started the auto upsate to Windows 10 from windows 8 and It restarteded a few Times and everything seemed Good, so i went to sleep and leet the computer run. So when i Woke up this morning i went to the computer to test...
Drivers and Hardware
Monitors Lose Signal On Boot
I have 3 Benq xl2720z monitors all using dp. In the morning I went to turn on my monitors to find out there was no signal in any of them. I then rebooted my computer and when I got to the spinning orb, my computers faded to black in the middle of...
Graphic Cards
Monitors not getting any hdmi signal after reset from windows10 instal
Hi everyone. I hit the install button for windows 10. After 3 hours of waiting for it to restart I restarted the computer on my own, it will boot up and motherboard will beep, but both monitors will have orange lights and stay off( no hdmi signal) ...
Graphic Cards
PCI Data Acquisition and Signal Processing Controller ?
Yoga 2 11, device: PCI Data Acquisition and Signal Processing Controller anyone know what this is? have tried every ddriver I can find that MIGHT be the device, so far no luck.
Drivers and Hardware
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:21.
Find Us
Twitter Facebook Google+



Windows 10 Forums