Gigabyte B450 Aorus Pro WiFi mobo video

Page 1 of 3 123 LastLast

  1. Posts : 119
    Windows 10 17713.1000 1807.rs5_release 180706-1551
       #1

    Gigabyte B450 Aorus Pro WiFi mobo video


    I just bought a Gigabyte B450 Aorus Pro WiFi mobo, and combined it with a Ryzen 3 1200 CPU; 2X8GB Vengence DDR4 RAM;
    and a MSI Radeon HD 5450 Direct X 1 GB 64-Bit DDR3 PCIe 2.1 x16 HDCP Ready Video card. But what I get, after post,
    and the Windows logo, is a pixeled display of color patterns, that go from black screen to color scramble, and back
    and forth, until the monitor shuts down from no signal, while the computer continues to run. The monitors have no
    "wake-up" protocol. I have to shut down, and reboot the system. What am I looking for? What SHOULD I be looking for?
    Is the card compatible with the CPU, memory, and mobo?
    Attached Thumbnails Attached Thumbnails Monitor.jpg  
      My ComputerSystem Spec

  2.    #2

    Did you try Safe mode ? This picture looks like it's due to wrong frequency.
      My ComputersSystem Spec


  3. Posts : 119
    Windows 10 17713.1000 1807.rs5_release 180706-1551
    Thread Starter
       #3

    You know how, when it starts up, there is the Windows logo on the screen? Well, I get that, but when the dots start to rotating, after a half minute, or so, they stop, and a tick later, that screen. I don't know what you mean by "wrong frequency". I never fiddle with the frequency. The CPU is in control there.
    Attached Thumbnails Attached Thumbnails 20190223_173019.jpg   20190223_172939.jpg  
      My ComputerSystem Spec


  4. Posts : 119
    Windows 10 17713.1000 1807.rs5_release 180706-1551
    Thread Starter
       #4

    You know how, when at startup, you get the Windows logo on the screen? Well, I got that, then, I get the rotating dots for a half minute, or so. Then a tick or two later, that screen shows up. I'm not sure what "wrong frequency" you're talking about, but I never bother with that. The CPU takes care of that. As you can see from the photos.
      My ComputerSystem Spec


  5. Posts : 119
    Windows 10 17713.1000 1807.rs5_release 180706-1551
    Thread Starter
       #5

    djbillyd said: View Post
    You know how, when at startup, you get the Windows logo on the screen? Well, I got that, then, I get the rotating dots for a half minute, or so. Then a tick or two later, that screen shows up. I'm not sure what "wrong frequency" you're talking about, but I never bother with that. The CPU takes care of that. As you can see from the photos.
    Disregard this post. I can't delete it.
      My ComputerSystem Spec

  6.    #6

    Isn't that a UEFI only board, no bios option to run legacy bios graphics card.
    Check your manual and/or contact GA support.
      My ComputerSystem Spec


  7. Posts : 119
    Windows 10 17713.1000 1807.rs5_release 180706-1551
    Thread Starter
       #7

    Click image for larger version. 

Name:	20190223_213307.jpg 
Views:	1 
Size:	1.75 MB 
ID:	225364
    paulco said: View Post
    Isn't that a UEFI only board, no bios option to run legacy bios graphics card.
    Check your manual and/or contact GA support.
    In the BIOS, there is the option to choose legacy, or UEFI.
      My ComputerSystem Spec


  8. Posts : 119
    Windows 10 17713.1000 1807.rs5_release 180706-1551
    Thread Starter
       #8

    And I'm beginning to have even more issues. I think I'm gonna give GA their board back and try something else. While the RAID reader in the startup recognizes the SSD, and the BIOS recognizes the SSD, for whatever reason, the system won't boot to the SSD. And when I attempt to boot to a bootable drive with the OS on it, it shows a "We couldn't find a hard drive" in the installation's partition table. I load the SSD with Win 10 x64 from another system, without changing the GPT formatting, and it still doesn't recognize it. Crazy.
      My ComputerSystem Spec

  9.    #9

    By frequency, I meant the refresh frequency of video signal from GPU to monitor, usual ones are 60Hz, 75, 120, 144. It can be set in the GPU driver/control and/or monitor itself. Most monitors have Auto adjust in their on screen menu.
      My ComputersSystem Spec


  10. Posts : 119
    Windows 10 17713.1000 1807.rs5_release 180706-1551
    Thread Starter
       #10

    CountMike said: View Post
    By frequency, I meant the refresh frequency of video signal from GPU to monitor, usual ones are 60Hz, 75, 120, 144. It can be set in the GPU driver/control and/or monitor itself. Most monitors have Auto adjust in their on screen menu.
    OK, I got that. But I gotta have a serious discussion with GA about the Chipset log in my BIOS. I have no "Integrated Graphics" settings at all. And, true to form, I have no integrated graphics on my board! NOTHING works for graphics, DVI, or HDMI. Nothing! My system:Click image for larger version. 

Name:	20190224_131338.jpg 
Views:	1 
Size:	1.80 MB 
ID:	225410 The manual:Click image for larger version. 

Name:	20190224_131738.jpg 
Views:	1 
Size:	1.74 MB 
ID:	225412
      My ComputerSystem Spec


 
Page 1 of 3 123 LastLast

Related Threads
Z370 Aorus Gaming Wifi PCIE lanes in Drivers and Hardware
Hi guys! A quick question. I have a Z370 Gaming Wifi motherboard and I have 2 SSDs, 3 HDDs and an Optane drive installed. I'm planning to purchase a NVME drive to place on the 2nd M.2 slot (bottom slot) but I would like to clarify if it will read...
Hi! I just upgraded my motherboard and processor to the 8th gen lineup. With that upgrade, I decided to purchase an Optane drive and a m.2 ssd drive. This is my plan for my drives C - OS drive (850 evo) D - Crypto wallet (850 pro) E -...
Hello. Im posting this in hardware section because i'm not sure if this fits in the graphics card section. As the title says i have an ASUS ROG G752VY laptop... Bought myself the 1080 Aorus gaming box. When i connect it to my TB3 port,...
Iím having a problem with my DVD Burner operation on Windows 10 that I think is related to the driver. Recently I moved the DVD Burner from one of the native SATA ports to one of two on-board GSATA ports. The second GSATA port is unconnected. ...
I built my Intel i5 PC in 2010. The mobo is the Gigabyte GA-P55-USB3 "Ultra Durable"... After recently upgrading to Windows 10, I attempted to upgrade my RAM from 4 to 8 GB. My mobo did not recognize the two available RAM slots. I decided...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 03:11.
Find Us