Page 5 of 5 FirstFirst ... 345

  1. Joined : May 2016
    Posts : 1
    windows 10
       11 May 2016 #41

    PhilGates said: View Post
    You need to uninstall your previous AMD Control centre (Remove everything) and restart your computer, and then install the windows 7/8 AMD legacy driver (AMD Catalyst 13.4 Legacy Driver) under compatibility mode windows 8 with administrative rights (Right click on setup and select compatibility mode Windows 8, place tick in Administrative rights), this will then give you partial Catalyst control centre. You then need to go to Device manager and manually force install the legacy display driver which did not install using setup. Double click on Ati display driver choose driver tab, select update driver, select 'browse my computer' for driver, then select 'Let me pick from list' click on have disk, and browse to your driver directory and select the driver inf file, this will then install the legacy driver correctly, and give you full functionality of the Legacy driver. This driver works fine with no issues detected so far, even the app market works fine.

    Hope this helps, all the best.




    Phill
    I just wanted to elaborate on this installation a bit. It did work. However for a semi unsavvy tech person it took me a difficult amount of time to get it to work. I have the AMD HD 4770 running dual monitors on Windows 10.

    The first step in the process is to download AMD CC 13.4 from the website located here:
    Legacy


    Once it is downloaded, you can just install the .exe file by the usual process without any compatibility mode process. It'll tell you that there is an error in the log at the end of installation. And the driver failed to install. That is completely OKAY.

    Next step is to proceed to your device manager. Look for "Display Adapter" and your graphics card model under it. Right click on the model and select update driver. Then you will select the options where you pick your own disk file (Browse my computer > Let me pick a list of devices... > Have Disk > Browse for the following folder: X:/AMD/AMD_catalyst_13.4 file/Packages/drivers/display/(This is where it gets tricky) .

    Tricky part: There should be approximately six .INF files in the two folders after .../display/. You will follow the process above and try all six files until you are able to change the resolution to the best setting (or when it automatically fixes the resolution).

    This completes the installation.

    Furthermore: I had issues getting both my monitors to display at 1920x1200. Only one monitor was able to do that. The other would only display it's highest at 1600x1200. Luckily, I've encountered this issue in the past and knew it had to do with my DVI to VGA adapter. I have a few spare so I tried them each out until one adapter gave me the 1920x1200 resolution. They cost a few bucks for a pack on Ebay. Make sure you're buying the right one.

    Hope this helps.
      My System SpecsSystem Spec


  2. Joined : Jul 2015
    Posts : 1
    Windows 8.1
       07 Jun 2016 #42

    Jim4646 said: View Post
    I kept getting it to work after the mod and then finally went into Chrome settings and unchecked disable hardware acceleration box in advanced settings. All working fine now. Many thanks.
    I just upgraded from Win 8.1 to Win 10, and got the green screen video in FB. This Chrome tweak worked for me, too. Thank you.
      My System SpecsSystem Spec


  3. Joined : Aug 2016
    Posts : 1
    Windows 10
       01 Aug 2016 #43

    rsx1212 said: View Post
    I just wanted to elaborate on this installation a bit. It did work. However for a semi unsavvy tech person it took me a difficult amount of time to get it to work. I have the AMD HD 4770 running dual monitors on Windows 10.

    The first step in the process is to download AMD CC 13.4 from the website located here:
    Legacy

    Once it is downloaded, you can just install the .exe file by the usual process without any compatibility mode process. It'll tell you that there is an error in the log at the end of installation. And the driver failed to install. That is completely OKAY.

    Next step is to proceed to your device manager. Look for "Display Adapter" and your graphics card model under it. Right click on the model and select update driver. Then you will select the options where you pick your own disk file (Browse my computer > Let me pick a list of devices... > Have Disk > Browse for the following folder: X:/AMD/AMD_catalyst_13.4 file/Packages/drivers/display/(This is where it gets tricky) .

    Tricky part: There should be approximately six .INF files in the two folders after .../display/. You will follow the process above and try all six files until you are able to change the resolution to the best setting (or when it automatically fixes the resolution).

    This completes the installation.

    Furthermore: I had issues getting both my monitors to display at 1920x1200. Only one monitor was able to do that. The other would only display it's highest at 1600x1200. Luckily, I've encountered this issue in the past and knew it had to do with my DVI to VGA adapter. I have a few spare so I tried them each out until one adapter gave me the 1920x1200 resolution. They cost a few bucks for a pack on Ebay. Make sure you're buying the right one.

    Hope this helps.


    When I try to manually install the older driver, instead of flickering, the screen goes black and never comes back. I also experience the black screen after every boot. The loading screen is shown with no problem, but then it turns black. I realized if I tap the power button once, suspending the computer, and turn it back on, the screen works again. But it sucks to suspend the PC everytime after freshly turning it on.

    Furthermore, my CCC does not work with neither driver (not with the one Windows automatically sets, nor with the one that comes with Catalyst 13.4).

    I've tried everything I've read on this matter; cleaned everything with DDU, installed manually from Device Manager, you name it. Nothing seems to fix the black screens and give me the CCC full control back. I'd appreciate any help.

    Edit: figured it wouldn't harm mentioning I just clean installed Windows 10, I'm using stock drivers for about everything and have an almost virgin registry.
      My System SpecsSystem Spec


  4. Joined : Aug 2015
    Posts : 4
    Windows 10
       18 Aug 2016 #44

    I have a hd 4770 that works fine with Windows 10. My driver is 8.970.100.9001. I recently downloaded a game that tells me I need update to driver 15.30.1025.1001 from the Crimson Edition. I'm aware that AMD discontinued support for the 4770 in 2013. But apparently, some are using newer drivers successfully. I'm wondering if anyone has had success using the 15.30.1025.1001 driver.
      My System SpecsSystem Spec


 
Page 5 of 5 FirstFirst ... 345


Similar Threads
Thread Forum
realtek driver tweaked in windows 7 - will the new win 10 driver ...
Hello : I have my realtek driver tweaked in windows 7 , I have it set in the registry to have 2 outputs , instead of one - will the new win 10 driver be able to be adjusted ... Thanks
Drivers and Hardware
AMD Radeon 6370M brightness problem after update driver
Hi, I updated from Windows 8.1 Pro to Windows 10 Pro RTM, everything looks fine till I update the Graphic Card drivers to the latest ones (15.7.1). After the drivers update, brightness control stop working in all the ways (fn keys, control panel,...
Graphic Cards
AMD Radeon R9 380 Windows 10 bulid 10162 Driver Issues
Hi i cant install amd drivers on windows 10 on my r9 380 card at all. hope amd relesese a driver to fix it When i have my 7970 card the win 10 driver works good then but windows update didnt want to update the driver on my R9 380 card at all.
Graphic Cards
AMD RADEON HD 7730M not compatible with windows 10
I am running a Windows 8.1 laptop which has recently had the 'Get Windows 10' icon pop up. Clicking on 'Check your PC' within 'Get Windows 10' it says that I will experience problems with my display. Is there anything I can do so that I don't...
Graphic Cards
Video Driver For Gateway E6300 Radeon X 600/X550 for windows 10
Trying to find a video driver for my old Gateway E6300 with a Radeon X600/X550 video controller. The first test on Windows 10 several months ago worked but will not work on Windows 10 Inside Preview X32.
Drivers and Hardware
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 04:48.
Find Us
Twitter Facebook Google+



Windows 10 Forums