Page 4 of 4 FirstFirst ... 234
  1.    4 Weeks Ago #31
    Join Date : Sep 2017
    Posts : 91
    Windows 10

    First of all,..glad you're back up and running.
    Could it be that the memory stick/s wasn't seated properly from the beginning and by taking it out and reseating was all that was needed irrespective of the RAM profile change? But then again,..didn't you do that already anyway?,..taking out the sticks and reseating them one by one?
      My ComputerSystem Spec
  2.    4 Weeks Ago #32
    Join Date : Nov 2014
    Oregon
    Posts : 155
    Windows 10
    Thread Starter

    Yes.. I did pull and reseat the memory as a troubleshooting step. I did not swap their position though. I am currently running Windows memory diagnostic against the ram which is 97% complete without errors. Strangeness...
      My ComputerSystem Spec
  3.    4 Weeks Ago #33
    Join Date : Nov 2014
    Oregon
    Posts : 155
    Windows 10
    Thread Starter

    It completed without issue. I just reboot the machine 3x without issue. Seems like I am out of the rough water, though I am not 100% certain how I pulled it off.. Still, I will take it.
      My ComputerSystem Spec
  4.    4 Weeks Ago #34
    Join Date : Jun 2015
    N.Y.
    Posts : 3,069
    Windows 10 Pro 64 bit

    Well this issue was happening before you took out the RAM and put it back in again.
    Usually if you want the system to be stable you run the RAM at its rated specs, you either enable an XMP profile or manually set the values in the BIOS. I don't know how this changed if this was the true cure.

    Glad it is working and hopefully stays working.
      My ComputerSystem Spec
  5.    4 Weeks Ago #35
    Join Date : Apr 2017
    Posts : 8,592
    windows 10 professional version 1607 build 14393.969 64 bit

    Each software that tests RAM / DIMM / Motherboard uses a different algorithm.
    The software that we use regularly in the BSOD forum is Memtest86+ version 5.01.

    Run memtest86+ version 5.01 for at least 8 passes.
    The more passes the better the test.

    This may take many hours so plan to run it overnight.

    Memtest86+ - Advanced Memory Diagnostic Tool
    Memtest86+ - Advanced Memory Diagnostic Tool


    When Memtest86+ version 5.01 has completed 8 or more passes use a camera or smart phone camera to take a picture and post an image into the thread.

    Memtest86+ version 5.01 is not run by time but by passes.
    It sometimes takes passes into the 20's to find malfunctioning RAM.

    Testing using Memtest86+ version 5.01 takes approximately 1 - 2 hours / GB RAM
    Just 1 error is a fail and you can abort testing.
    Then test 1 RAM module at a time in the same DIMM for 8 or more passes.


    Memory problems. - Microsoft Community


    MemTest86+ - Test RAM BSOD Tutorials

    For each Memtest86+ test please use a camera or smart phone camera to take a picture and post an image into the thread.
      My ComputerSystem Spec
  6.    4 Weeks Ago #36
    Join Date : Nov 2014
    Oregon
    Posts : 155
    Windows 10
    Thread Starter

    It has completed a few passes in Memtest. 1 question. My RAM is set to run at 1600mhz, but according to memtest it is currently running at 800mhz. Is this normal?
      My ComputerSystem Spec
  7.    4 Weeks Ago #37
    Join Date : Nov 2014
    Oregon
    Posts : 155
    Windows 10
    Thread Starter

    Quote Originally Posted by zbook View Post
    Each software that tests RAM / DIMM / Motherboard uses a different algorithm.
    The software that we use regularly in the BSOD forum is Memtest86+ version 5.01.

    Run memtest86+ version 5.01 for at least 8 passes.
    The more passes the better the test.

    This may take many hours so plan to run it overnight.

    Memtest86+ - Advanced Memory Diagnostic Tool
    Memtest86+ - Advanced Memory Diagnostic Tool


    When Memtest86+ version 5.01 has completed 8 or more passes use a camera or smart phone camera to take a picture and post an image into the thread.

    Memtest86+ version 5.01 is not run by time but by passes.
    It sometimes takes passes into the 20's to find malfunctioning RAM.

    Testing using Memtest86+ version 5.01 takes approximately 1 - 2 hours / GB RAM
    Just 1 error is a fail and you can abort testing.
    Then test 1 RAM module at a time in the same DIMM for 8 or more passes.


    Memory problems. - Microsoft Community


    MemTest86+ - Test RAM BSOD Tutorials

    For each Memtest86+ test please use a camera or smart phone camera to take a picture and post an image into the thread.
    It seems to be good. No errors. CPU temp holding around 50 degrees C. Not sure why my Memory is only running at 800mhz during the test though..

    Update: I exited the test after 2 passes because I need to use the machine, and the problem returned. This time, I was able to power off, discharge all latent power in motherboard, and turn it on to get back into windows. Still, I think I will run the memtest throughout the night tonight to see what it does.
      My ComputerSystem Spec
  8.    4 Weeks Ago #38
    Join Date : Sep 2015
    Staffordshire
    Posts : 360
    Windows 10 Pro

    Yes it's the base clock of 800Mhz multiplied by 2 which is actual speed, CPU-Z does the same only reads the base clock ignoring the multiplier.
      My ComputersSystem Spec
  9.    4 Weeks Ago #39
    Join Date : Aug 2016
    S/E England
    Posts : 4,476
    10 Home x64 (1709) (10 Pro on 2nd pc)

    Quote Originally Posted by musiclover7 View Post
    . Anyways, my machine is working again!!

    .... I don't know how well I can trust this resolution. ... I have basically got a year left on this motherboard warranty, so resolving any problem now if there is one is advantageous!
    Now would be an extremely good time to link your digital licence to your MS account - means you can run the activation troubleshooter on a replacement motherboard (if it comes to that).

    Link Microsoft Account to Windows 10 Digital License
      My ComputersSystem Spec
  10.    4 Weeks Ago #40
    Join Date : Apr 2017
    Posts : 8,592
    windows 10 professional version 1607 build 14393.969 64 bit

    After the Memtest86+ version 5.01 has completed 8 or more passes please use a camera or smart phone camera to take a picture and post the image into the thread. If the image does not post for any reason please post a share link using one drive or drop box.

    Please run
    CPU-Z | Softwares | CPUID
    CPU-Z | Softwares | CPUID
    open it and make screenshots of the following tabs
    CPU
    Mainboard
    Memory
    SPD*
    Graphics


    *SPD shows the details of each stick, you can show the details by choosing different slots in the left upper corner.
    Please make screenshots of each stick.


    Please post each screenshot in your next reply/replies.


    Also download and install: HWiNFO64
    HWiNFO - Download
    Hardware Info (HWiNFO) is a powerful system information utility designed especially for detection of hardware.

    Post a screenshot of the "System Summary" window here.
    Take Screenshot in Windows 10 General Tips Tutorials
      My ComputerSystem Spec

 
Page 4 of 4 FirstFirst ... 234


Similar Threads
Thread Forum
Laptop Lost Power
Hi I was using my Laptop, Dell Vostro 1000, and it shut down. I pushed the power button and nothing happened, so I did the following: Checked the wall outlet. Removed the battery and tried to power it up with the power...
Drivers and Hardware
Solved Windows powers down during boot, wtf?
When I power up my PC, the BIOS boots, then I see the blue window in the center of the screen as Windows 10 x64 is allegedly booting, then my machine powers down/off. If I then press the power button again, Windows 10 actually boots as it should....
General Support
Solved Computer powers off on cold boot. Works second time and with restarts.
Greetings! Ive been having this problem for about 2 weeks now and its finally starting to annoy me. On first boot my computer just shuts down when it gets to to the windows 10 loading screen, right before the loading circle pops up. it doesn't...
General Support
Lost Power Options (clean install) Please help!
Hi. I updated from 8.1 to 10 and have lost all of my power options. The only one I have is "balanced". Is there any way I can enable "high performance"? Your help is appreciated! Joseph
Drivers and Hardware
I lost my power options (clean install) HELP!
Hi. I updated from 8.1 to 10 and have lost all of my power options. The only one I have is "balanced". Is there any way I can enable "high performance"? Your help is appreciated! Joseph
Gaming
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 12:52.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums