Page 1 of 5 123 ... LastLast
  1.    23 May 2017 #1
    Join Date : May 2017
    Posts : 25
    Win10

    Cannot boot Windows 10, unknown problem


    I'm not sure where to send this message, so I decidet to do that here.

    Things are a little bit complicated. I'm not sure whether that happened after I deleted old files after installing of version 1703 or after I set OO Defrag to execute defragmentation during boot process. In any case, I can't boot my system anymore. There are two partitions on my hard drive, both of them are healthy and without any damages. I've tried MANY things how to recover BCD but without success. By my knowledge if system partition wasn't damaged, it should be possible to repair booting process. Hope that someone would help me with a good advice
      My ComputerSystem Spec
  2.    23 May 2017 #2
    Join Date : Jan 2015
    UK, Midlands
    Posts : 10,928
    Win 10 Pro (1703)

    Hi, let's take a random stab (well, not really) in the hope nothing too serious has happened- but it's impossible to tell at this point.

    Download and create Macrium Reflect's boot disk.
    Boot your PC from it and use the Fix Boot utility.

    If that doesn't work, then assuming your Windows partition is undamaged, there's another approach.
      My ComputerSystem Spec
  3.    23 May 2017 #3
    Join Date : May 2017
    Posts : 25
    Win10
    Thread Starter

    Hi, thx

    I've already tried with some WinPE disks but not with this one. Hope to download it tonight.
      My ComputerSystem Spec
  4.    23 May 2017 #4
    Join Date : Dec 2015
    Posts : 5,841
    Windows10

    See part IV of this tutorial. It shows how to use Macrium Reflect's fix windows boot problems.

    Hyper-V - Native Boot VHD Windows 10 Virtualization Tutorials
      My ComputerSystem Spec
  5.    23 May 2017 #5
    Join Date : Jan 2015
    UK, Midlands
    Posts : 10,928
    Win 10 Pro (1703)

    Ok - MR is also a recommended disk imaging program. If you don't already use disk imaging, when this is fixed, I very strongly recommend you consider it, as it lets you rescue yourself from all manner of difficulties by restoring a previous working copy of partitions, both Windows and data.

    But at the moment, we're just interested in this one useful utility they provide.
      My ComputerSystem Spec
  6.    23 May 2017 #6
    Join Date : May 2017
    Posts : 25
    Win10
    Thread Starter

    Quote Originally Posted by dalchina View Post
    Download and create Macrium Reflect's boot disk.
    Boot your PC from it and use the Fix Boot utility.
    .
    How to create a boot disk if my system isn't working? From another PC?
      My ComputerSystem Spec
  7.    23 May 2017 #7
    Join Date : Jan 2015
    UK, Midlands
    Posts : 10,928
    Win 10 Pro (1703)

    Yes, that's what you'd have to do. (It's a really good idea to have some basic tools ready for disaster).
      My ComputerSystem Spec
  8.    23 May 2017 #8
    Join Date : May 2017
    Posts : 25
    Win10
    Thread Starter

    Well... what I did in the meantime, I've downloaded MR 7 and installed it from WinPE (I was skeptical but it works). , I went to 'Fix Windows boot problems', selected Win 10 on my C drive at the 1st dialogue. 2nd d.: selected my system's partition C: 3rd d.: accepted all suggested options and click on Finish. After restart I'm getting error that nvstor.sys is missing from WINDOWS\System32\drivers\ I've checked that folder and really, it wasn't there
      My ComputerSystem Spec
  9.    23 May 2017 #9
    Join Date : Jan 2015
    UK, Midlands
    Posts : 10,928
    Win 10 Pro (1703)

    Hi, yes, using an appropriate boot disk can give you internet access.

    You could try this, but I have my doubts...

    Use a boot disk to boot to a command prompt. (A Win 10 boot disk will let you do that).

    Then, after working out the drive letter of the partition where Windows is (it won't necessarily be C: as viewed from such a command prompt) try

    Scan Your System

    Finally you're ready to scan your system files for errors. To do that simply run the following command:
    sfc /scannow /offbootdir=[DRIVELETTER]:\ /offwindir=[DRIVELETTER]:\windows

    Substitute the drive letter you noted earlier for [DRIVELETTER]. There should be no square brackets in the command (image below).

    Windows will now attempt to find and repair any errors in your system files. If the scan finds errors, you may need to repeat the steps in this guide until it finds no more errors. To restart your computer, enter the exit command, then click the Restart button. When you're ready to try booting into Windows again, remove the install disc and restart one final time.
      My ComputerSystem Spec
  10.    23 May 2017 #10
    Join Date : May 2017
    Posts : 25
    Win10
    Thread Starter

    This is sooooooo frustrating.... I scanned system files and still get the same error related with nvstor.sys
    can someone send this file to me on some way? Build version 15063
      My ComputerSystem Spec

 
Page 1 of 5 123 ... LastLast


Similar Threads
Thread Forum
Solved Groove Shows Unknown Artist & Unknown Album
I've just installed Windows 10 and experimented with the Groove music player. It finds all the songs but they are tagged Unknown Artist and Unknown Album. The songs appear fine in iTunes with the correct details and album art. I reset Groove and...
Software and Apps
Solved Windows 10 boot problem
I recently got a Samsung 850 evo 250gb ssd and I decided to clone my old intel 330 ssd into it. It contains my Windows 7 OS and I decided that I upgrade the OS on the samsung to windows 10. Everything was fine and I got into the desktop after...
General Support
Boot problem Windows 10
Hi, yesterday, in my PC with Windows 10 installed, I opened Windows 7 installer and pressed "Install now", I immediatly cancel the operation and a new partition next to C: showed up. I knew nothing about system partition, so I thought it was a new...
General Support
Unknown Partition - Unknown File System - Cannot edit or remove!
I was in the process of updating several sata controllers and chipset drivers. I also installed a new USB 3.0 hub and was in the process of moving around several devices between ports. I had a problem with my keyboard which uses USB 2.0 as a...
Drivers and Hardware
Problem on Windows 10 Boot-Up.
Ever since switching to Windows 10, I can not boot-up properly. Whenever i have a cold boot-up, I will get the Windows 10 insignia with loading circle. Then, I will get a black screen, and my screen will completely turn off and not detect my...
Performance & Maintenance
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 18:10.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums