Windows 10: 1703 clean install immediately gives 0x80070057 error

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 6
    Win 10 Pro 1607
       09 May 2017 #11

    Hi zbook,


    a. Winver - Version 1607 Build 14393.1066, from System - About : Windows 10 Pro 64-bit
    b. I pretty much can do what I need to do. From my original issue when I tried 1703, I can see that Windows is activated, updates are working, I can install from the app store. In short, running on 1607 may not be the latest and greatest but I have no issues.
    c. sfc /scannow - took a while but I think I might have paused it at 86% cuz when I hit enter it continued at its phase. Eventually completed 100% and did not find any integrity violations.
    d. dism - completed successfully.
    e. chkdsk - found no problem
    f. At this point, I’m not planning to re-install or upgrade to 1607 yet. I really just wanted to get it up and running stable enough to do basic stuff like Office, Citrix and a bit of Kodi. I’ve allocated a 20GB partition to dual boot to a Ubuntu 16.04 to run Kodi. Believe it or not, this is my only Windows machine.


    Hi mc510,


    My unit is a NUC DN2820FYK - Intel Celeron N2830 2.16 Ghz. with a 120GB Kingston SV300S3 SSD and 4GB Kingston DDR3 1600 Mhz. -
      My ComputerSystem Spec


  2. Posts : 6
    Win 10 Pro 1607
       09 May 2017 #12

    DeaconFrost said: View Post
    I saw something similar to this on a Dell laptop. I had to install newer network drives for the wired connection (since it was using that) and after a reboot, the laptop was able to get online and activate properly.
    I have installed the latest drivers from Intel for my network card when I was testing 1703. But I might just post the question to Intel support too. Perhaps they need to release a new driver.
      My ComputerSystem Spec

  3.    09 May 2017 #13

    artipax said: View Post
    Hi mc510,
    My unit is a NUC DN2820FYK - Intel Celeron N2830 2.16 Ghz. with a 120GB Kingston SV300S3 SSD and 4GB Kingston DDR3 1600 Mhz. -


    Artipax, I've seen comments about Intel NUC having this problem, fixed by updating BIOS. Hope that works for you!
      My ComputerSystem Spec


  4. Posts : 6
    Win 10 Pro 1607
       09 May 2017 #14

    Hi mc510,

    Currently, the latest BIOS for NUC DN2820FYK is Ver 0057 dated 3-Mar-2017. Now that you mentioned it, I checked and found out that I've been using it since 16-Mar-2017. :-(

    It couldn't be it then. Darn. I've bookmarked that reddit link but. Thanks.
      My ComputerSystem Spec

  5.    09 May 2017 #15

    artipax said: View Post
    Hi mc510,

    Currently, the latest BIOS for NUC DN2820FYK is Ver 0057 dated 3-Mar-2017. Now that you mentioned it, I checked and found out that I've been using it since 16-Mar-2017. :-(

    It couldn't be it then. Darn. I've bookmarked that reddit link but. Thanks.
    Bummer.

    Sounds like you're okay with 1607 for now and aren't planning to try 1703 again any time soon?
      My ComputerSystem Spec


  6. Posts : 6
    Win 10 Pro 1607
       09 May 2017 #16

    Hi mc510,

    i suspect that my issue is either BIOS or network driver related. Intel is quite good in releasing regular updates, best for me to wait before attempting to upgrade again.
      My ComputerSystem Spec


  7. Posts : 2
    Windows 10 Home
       02 Jun 2017 #17

    Have same issue and after too many chats with Microsoft answer desk agents the last chat was with level 2 research engineer,
    He told me that the issue is caused by the lack of drivers support of my laptop manufacture!!
    It's Lenovo Z580 laptop and last drivers were for 8.1
    Idk weather to believe him or not but he had a point when he told me that due to incompatibility issue I'm experiencing slow downs and I never told any agent about experiencing such issue!!
    I would appreciate any advice you can offer
      My ComputerSystem Spec

  •    05 Jun 2017 #18

    DoVaH85 said: View Post
    He told me that the issue is caused by the lack of drivers support of my laptop manufacture!!
    It's Lenovo Z580 laptop and last drivers were for 8.1
    Mine also no longer has driver support from the manufacturer, and most recent drivers were Windows 7. So maybe it really is a driver issue. But if so, very frustrating, because the "old" drivers have been working fine with previous editions of Windows 10. And when I first installed Windows 10, the installer did a hardware check and said "compatible with Windows 10." Microsoft shouldn't be breaking hardware compatibility with its mandatory feature upgrades!
      My ComputerSystem Spec

  •   My ComputerSystem Spec


  • Posts : 1
    Windows 10 x64 Pro Creators Update 1703
       19 Jul 2017 #20

    Artipax, I had the same problem on my NUC DN2820FYK. The fix is very simple, you need to insert the serial number of your NUC in the BIOS. Follow the instructions in this discussion at Microsoft Community:
    After installing creator update, NUC failed with 0x80070057 on Win - Microsoft Community
    I managed to fix my problems doing only the changes to the BIOS, using Intel Integrator Toolkit. No other troubleshooting required. Hope you can fix your problem as well.
      My ComputerSystem Spec


  •  
    Page 2 of 3 FirstFirst 123 LastLast

    Related Threads
    I recently began having issues with Windows 10 (problems with the start menu not opening, the troubleshooter not being able to start, indexing repeatedly turning on and off, etc.), so I decided to do a clean install of Windows. I had some issues...
    I have some archives that contain files with double quotes in their filenames (Example: photo"summer"01.png). And when I try to extract them, I get Error 0x80070057: The parameter is incorrect. As we know, Windows does not allow double quotes...
    Getting error 0x80070057 in Windows Updates and Activation
    When trying to install the anniversary update I get to 2% and then I get this error 0x80070057. I need to know a simple way to correct this.
    Solved Anniversary Update error 0x80070057 in Installation and Upgrade
    Trying to update using Windows 10 Update assistant as automatic update not showing yet. It checks my system then downloads ok but once it starts it stops at 1 or 2 % and says "Something waent wrong " and gives error code 0x80070057. All previous...
    Error Code 0x80070057 in General Support
    Hello, I had to go back to rename numerous files that I messed up in naming. I went through and fixed the names of maybe 30 files. One file, however, refuses to change. Every time I change the name (the file is not open in any programs) and hit...
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 00:18.
    Find Us