1.    08 Apr 2017 #1
    Join Date : Apr 2017
    Posts : 3
    Windows 10

    Every reboot goes into Advanced Startup, why?


    While most people are wanting to figure out how to get into the advanced startup menu[1] I have a different issue. Every time I reboot, it always goes to this, requiring me to choose "Continue to Windows 10" and reboot a _second_ time.

    I use VeraCrypt for full disk encrypion, so it means two times of having to enter my password, and also I just tried applying the founders update, it said it was all good and needed to reboot, but after reboot, it went back to this, didn't act like it was applying any updates (I just did on another system, and I know to expect a lot of "we're updating things, hold tight" screens) and went right back into Windows 10 like it was never applied. Running the Update Assistant again and it says I'm not current. So I'm not sure if that is somehow interrupting the process from being able to be applied properly.

    Anyone have any ideas on this? Everything I search for is about trying to get into the advanced startup menu. Not always going to it

    1. https://www.tenforums.com/attachment...up_options.jpg
      My ComputerSystem Spec
  2.    08 Apr 2017 #2
    Join Date : Apr 2015
    Posts : 12,841
    W10Prox64

    Quote Originally Posted by miketew View Post
    While most people are wanting to figure out how to get into the advanced startup menu[1] I have a different issue. Every time I reboot, it always goes to this, requiring me to choose "Continue to Windows 10" and reboot a _second_ time.

    I use VeraCrypt for full disk encrypion, so it means two times of having to enter my password, and also I just tried applying the founders update, it said it was all good and needed to reboot, but after reboot, it went back to this, didn't act like it was applying any updates (I just did on another system, and I know to expect a lot of "we're updating things, hold tight" screens) and went right back into Windows 10 like it was never applied. Running the Update Assistant again and it says I'm not current. So I'm not sure if that is somehow interrupting the process from being able to be applied properly.

    Anyone have any ideas on this? Everything I search for is about trying to get into the advanced startup menu. Not always going to it

    1. https://www.tenforums.com/attachment...up_options.jpg
    Hi miketew and welcome to Tenforums.
    I not familiar with VreaCrypt, so I can't comment on that, but wondering if you have Fast Startup turned on? If it's on, please turn it off and give it a couple real shutdowns.
      My ComputerSystem Spec
  3.    08 Apr 2017 #3
    Join Date : Aug 2015
    Posts : 504
    Windows 10 Pro x64 1607

    Sounds like it put a dual boot file in the BCD and isn't updating Windows correctly.

    I updated to the creators update and having issues myself.

    I've never heard of that program either so I cant comment on that myself
      My ComputerSystem Spec
  4.    08 Apr 2017 #4
    Join Date : Aug 2016
    S/E England
    Posts : 4,526
    10 Home x64 (1709) (10 Pro on 2nd pc)

    VeraCrypt is a fork of the discontinued TrueCrypt project according to Wikipedia (and no, I don't use it either).
      My ComputersSystem Spec
  5.    08 Apr 2017 #5
    Join Date : Apr 2017
    Posts : 3
    Windows 10
    Thread Starter

    No, I don't have fast startup turned on.

    I'll have to look at BCD and how it works I guess. Yes, VeraCrypt is essentially TrueCrypt.
      My ComputerSystem Spec
  6.    13 Apr 2017 #6
    Join Date : Apr 2017
    Posts : 3
    Windows 10
    Thread Starter

    still no dice.
      My ComputerSystem Spec
  7.    13 Apr 2017 #7
    Join Date : Aug 2016
    S/E England
    Posts : 4,526
    10 Home x64 (1709) (10 Pro on 2nd pc)

    Quote Originally Posted by miketew View Post
    I'll have to look at BCD and how it works I guess...
    @miketew, to display the BCD info and the info on the recovery environment, type the following commands in a command prompt.

    BCDEDIT

    REAGENTC /INFO

    Copy the results and paste them into a text file using Notepad. Post it as an attachment and we may be able to help diagnose your problem.

    How to Upload and Post Screenshots and Files at Ten Forums
      My ComputersSystem Spec
  8.    14 Apr 2017 #8

    OTOH, if you have Macrium Reflect at your disposal, you can use it to build Rescue media, then boot from that flash drive (or other medium). When so booted, I've found that it's startup/boot file repair functions are at least as good as the best of such tools (and less likely to cause problems than EasyBCD's boot/startup repair functions) and better than most of them. It might be able to fix it without too much additional effort on your part, so hopefully that makes it worth trying out.
    HTH,
    --Ed--
      My ComputersSystem Spec

 


Similar Threads
Thread Forum
Installation & Upgrade Boot to Advanced Startup Options in Windows 10
How to Boot to Advanced Startup Options in Windows 10 Advanced startup enables you to perform these actions: Start recovery (aka: Windows RE or WinRE), troubleshooting, and diagnostic tools. Boot from a disk (ex: USB or DVD) or device (UEFI...
Tutorials
Performance & Maintenance Enable Always Boot to Advanced Startup Settings in Windows 10
How to Enable or Disable Always Boot to Advanced Startup Settings in Windows 10 Advanced Startup Settings lets you start Windows 10 in different advanced troubleshooting modes to help you find and fix problems on your PC. Normally, you could...
Tutorials
Solved Advanced startup won't work
I activated offline scanning with defender while i have norton installed just to get a scan in and now i keep getting errors from norton that it's scans will be worsened because defender limited periodic scanning is on. I turned them all off and...
General Support
Solved Advanced Startup Option
Hey guys, i want to boot on advance startup option, but everytime i restarted, it just like a normal restart, (settings, recovery then restart) What must be the prblem? i just installed wndows 10 pro.
General Support
Customization Create Advanced Startup Options Shortcut in Windows 10
How to Create an Advanced Startup Options Shortcut in Windows 10 Advanced startup includes the options below and more: Start recovery (aka: Windows RE or WinRE), troubleshooting, and diagnostic tools. Boot from a disk (ex: USB or DVD) or...
Tutorials
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 04:20.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums