Windows 10: Dell No POST Info on Boot

  1.    19 Feb 2017 #1

    Dell No POST Info on Boot


    I have a dell Precision 7910 Tower with Win 10. When booting, I have no POST info displayed. Just the DELL in a big circle before going into windows. The same is on two Dell XPS8700.

    Anyone know of this is normal for Dell Systems with Win 10?

    thanks,
      My ComputerSystem Spec

  2.    19 Feb 2017 #2

    Does the computer boot? If not, there is a hardware issue.
    Restart the computer and press F12 at bootup, do the Dell Diagnostics.
    If you cannot get that far, then remove all external and internal drives (Ie) USB, HDD, CD drive etc and try booting and pressing F2 to enter Setup (Bios) If that works, add one drive at a time until the computer doesn't post, then you will know the bad drive.
    If after removing the drives, the computer still won't post or boot, then try removing all but one stick of RAM. Rotate them around. If that fails, then there is a motherboard problem with the computer.
      My ComputerSystem Spec

  3.    19 Feb 2017 #3

    no issues with the computer. Just curious why there is no post info displayed before getting into windows.

    thanks,

    Mike
      My ComputerSystem Spec

  4.    19 Feb 2017 #4

    the setting (if there) is in the BIOS (show OEM Logo)
    But Yes, all my Newer Dell's Boot to a logo
      My ComputerSystem Spec

  5.    19 Feb 2017 #5

    Kyhi said: View Post
    the setting (if there) is in the BIOS (show OEM Logo)
    But Yes, all my Newer Dell's Boot to a logo
    All my Dells do the same thing. My oldest is about 5 years.
      My ComputerSystem Spec

  6.    19 Feb 2017 #6

    if you turn off Show Logo in Bios, and Fast Boot, it shows the POST info but takes longer to boot.
      My ComputerSystem Spec

  7.    20 Feb 2017 #7

    thanks. Those options are not in the 7910 bios. Dell removed Fastboot in an earlier bios. I need to check the XPS8700.
      My ComputerSystem Spec

  8.    20 Feb 2017 #8

    What happens when you do a restart (instead of a shutdown)?
      My ComputerSystem Spec

  9.    20 Feb 2017 #9

    Same thing for shutdown and restart.

    Note the reason why I was looking for POST info was to see if it comes up with a message to press CTRL-C or CTRL-R to access the integrated LSI 3008 SAS card on the 7910. It does not. However, to access it, hitting F12 to the boot menu has Device Configuration. I just wondering if there were any other message I would see if the POST info showed and curious why POST does not show. I assume it is a win 10 with UEFI and secure boot thing.
      My ComputerSystem Spec


 

Related Threads
BSOD randomly on boot Bad System Config Info. in BSOD Crashes and Debugging
I have been able to boot every time but it pops up on random boots. ran SFC/scannow and it got some errors that it couldn't fix and i got these cbs 92845files. also attached are the requested files.92846 Thanks for the help!
Delete Boot Info in Installation and Upgrade
I have upgradede my PC installed win10 onto a new HDD i just connected up the 2 spare HDD's in me case, but 1 must have had a copy of win 10 in it. after booting up for the first time, it asked me for a password, which it said was wrong ...
Just for reference purposes For those who are interested in viewing the status or tracking of Windows 10 & Office with respect to builds, packages, official updates, ESD's, etc., you can visit the following page via the link below. I did...
Hello WindowsTenForums I was wondering if anybody can help me with this problem I seem to have, I used to run windows 7 flawlessly on my SSD with no problems at all, I upgraded to windows 10 a while back and that was fine. But for some reason a...
Solved Win 10 keeps losing dual boot info in Installation and Upgrade
Hi there. I had been dual-booting between win 7 and win 10. That part was working fine, but I was unhappy wth my win 10 installation. So I erased the partition and reinstalled it. First sign of trouble: It didn't detect my win 7 installation. But it...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 00:39.
Find Us