1.    24 Jan 2017 #1
    Join Date : Jan 2017
    Posts : 2
    Windows 10 Home Edition 64-bit

    Stuck in Automatic Repair Bootloop and Recovery Options Won't Work


    The Issue before the issue(this description is optional i guess): I tried installing a m.2 ssd on my new laptop and everything seemed to go fine during the cloning process. I soon realized the ssd wouldn't boot. Instead the internal hdd already in the laptop was being used as the boot device and the ssd was the c: drive. Everytime i tried to boot from the ssd, i would get a "no boot device found. press any key to restart the machine". So i tried the bootrec and diskpart commands and both drives ended up unbootable. After spending the whole day trying to boot these two without deleting anything, i created a windows recovery usb and was able to get the hdd to boot again but the ssd was removed as the primary drive and became the d: drive. This is when my issue arose

    The Main Issue:
    So a windows update needed to be install and requested a restart. I had accidentally pressed shift when i pressed "update and restart". I got the usual "windows is starting" screen and the update was being uploaded. All seemed normal until the reboot went through and i got stuck in a automatic repair bootloop.

    What I Tried: I attempted to use the command prompt once more to fix boot using bootrec. Didn't work because when i entered "bootrec /rebuildbcd" and selected the c: drive. Then i was given the "no system device was found". So i moved on to reinstalling windows from a windows recovery usb i created. It wouldn't let me install windows on any drive because "windows cannot be installed on a GPT partition". I tried restoring a system image but it says that it has run into an error. Restore points don't work because "system protection needed to be enabled". I finally tried to restore a factory image using the Dell SupportAssisst Recovery but it freezes on the "authenticating" pop-up.

    I apologize for all the mess I have made and I appreciate any help. I just purchased this computer and i don't want to have to lose it
      My ComputerSystem Spec
  2.    24 Jan 2017 #2
    Join Date : Jun 2016
    Los Angeles
    Posts : 1,040
    Windows 10 Pro

    When Windows installs on a HDD, it creates a hidden System Partition. This has all of the boot information in it. If you leave your Windows HDD in the computer and install an SSD or a different HDD and install Windows, Windows will not create a new Hidden System Partition, but use the one on the mechanical HDD. If you remove the HDD then the computer will not boot.
    I would remove the Mechanical HDD, then run the BCEdit commands. If that fails, you can create a bootable UEFI/GPT bootable Flash drive using Rufus, in my signature, Creating a UEFI bootable Windows 10 (and Windows 7, 8 and 8.1) USB installer with Rufus - YouTube
    Boot off of that to install Windows on the SSD. Once Windows is installed, you then can reattach the HDD.
      My ComputerSystem Spec
  3.    24 Jan 2017 #3
    Join Date : Jan 2017
    Posts : 2
    Windows 10 Home Edition 64-bit
    Thread Starter

    Yes! Thank you! I managed to do something similar to this with a bootable USB I made with the windows creation tool. I just let the HDD sit in the laptop though cause the connector wouldn't come off. Different connector than I'm used to. I reinstalled windows 10 on the SSD and everything boots fine and I can finally boot from my SSD.
    Thank you for your response Spunk. I will take note of your method in case the problem arises again. Seems more reliable.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Preparing automatic repair black screen afterwards stuck
Fixing this gaming PC for a friend. His computer gets stuck on the windows logo with the dotted spinning circle. In the past to fix this i've done a startup repair. But this time, the PC starts the Preparing Automatic Repair, then screen goes black,...
General Support
Drive With User Data Replaced; System Stuck In "Automatic Repair" Loop
Hi! Several years ago I built a desktop computer for my friend. I installed Windows 7 Ultimate on this, in the 64 bit version, and I followed user Kari's tutorial for placing User data and ProgramData on a separate physical hard drive. The system...
General Support
Stuck in automatic repair /diagnosing PC reboot loop
Currently I am stuck in this automatic repair /diagnosing PC loop. I force shutdown my lenovo G480 laptop as it was unable to get out of sleep mode and this happened. Currently every option I am given results in the same loop happening over or it...
Performance & Maintenance
Windows 10 gets stuck at "Preparing automatic repair" while installing
So I finally made a .iso file for W10 Pro x64 and started installing it. Everything went smoothly my PC restarted 2 times. But when it got to 81% (in total) while "Installing drivers and features" it resterted for the third time and then it started...
Installation and Upgrade
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:39.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums