1. Joined : Dec 2016
    Posts : 2
    Windows 10 Pro
       3 Weeks Ago #1

    Windows 10 booting up shows contro f raid


    My computer automatic installed windows 10 newest version AU and now I get control f raid when booting up. It goes so fast that you do not get a chance to do a control f, the computer then shows a blue window image and just stays there no spinning wheel or anything else. I have to reboot it and then it takes a long time to boot up and show the welcome user screen. Before the new update the computer was fine, what can I do to correct this problem i have not installed any programs. This computer came with only Win10 installed. Also need to make a recovery disk.

    Thanks for your help in advance

    Butterfly
      My System SpecsSystem Spec


  2. Joined : Jul 2014
    Serbia
    Posts : 7,009
    All kinds
       3 Weeks Ago #2

    Check BIOS and see if SATA controller is in RAID mode. Should be AHCI for SSD or ID/Legacy for HDD.
      My System SpecsSystem Spec


  3. Joined : Dec 2016
    Posts : 2
    Windows 10 Pro
       1 Week Ago #3

    Count Mike,

    Thank you for answering, I restored a earlier version of Windows 10pro that came on the system and had to go out of town. Upon returning and powering up the system it did a upgrade now I have a worst problem. The system will boot to the desktop and freeze. I tried to use the windows key but nothing happens, I can do a right click and get a menu to come up but not with the windows key, ctl+alt+del brings up task manager I can get to system and look at different items on it. One thing that I did was open system protection but I can not get into system restore the system restore key is grayed out and so is the rest of the keys except OK has a blue square around it, I can do left and right click on news but it will not open, I can not access the internet but can open a couple of programs I installed when I first got the computer. Help.

    Thanks in advance,
    Butterfly
      My System SpecsSystem Spec


  4. Joined : Jul 2014
    Serbia
    Posts : 7,009
    All kinds
       1 Week Ago #4

    That's a sign of wrong GPU driver.
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
MicroSD shows up with diminished capacity 128gb shows up as 200MB card
MicroSD shows up with diminished capacity (128gb shows up as 200MB card). It shows up with no data. It shows up a "Secure Digital Storage Device" Links: ASUS VivoTab Note 8 (M80TA) | Tablets | ASUS USA Amazon.com: Gigastone MicroSDXC 128GB C10...
Drivers and Hardware
Renaming Drives in RAID 1 Configuration - Necessary Drive Letter Shows
I have a dual Raid 1 configuration with (2) identical 500GB (C:) and 1TB (D:) drives. When connecting my (2) external hard drives, one of which needs to be named (F:) (I have numerous files, folders, icons and programs linked to it), I see that...
Drivers and Hardware
Windows 10 raid 1 using windows raid
Hello everyone. I'm new to the forum. I've added a hard drive to my system to enable raid 1 via windows 10 Pro (not hardware raid). my main drive has 4 partitions which were set up when I installed windows 8.1. I have since upgraded to 10...
Drivers and Hardware
Confused - am I booting in UEFI properly - msinfo32 shows I am but..?
I have installed Windows 10 pro on my self built PC using an Asus Z170-A motherboard. I used a USB in UEFI mode made using the Windows media creation tool. Motherboard BIOS updated. I have these drives: N1-Samsung SSD 950 PRO 256G has GPT...
Installation and Setup
Welcome Screen Shows Twice While Starting / Booting Computer
Hi All, I have this issue since I performed the upgrade from windows 8.1 to windows 10 on two computer's. When I start either one of them, I'm presented with the 'Welcome Screen' two separate times within the time span of approximately 10...
User Accounts and Family Safety
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:26.
Find Us
Twitter Facebook Google+



Windows 10 Forums