Windows 10: So I tried to boot from USB

  1.    21 Dec 2016 #1

    So I tried to boot from USB

    I saw a tutorial to boot from USB, and installed the code on the USB. The issue is with the next step. I changed the UEFI settings and turned off secure boot, turned on boot from legacy ROM, and then turned on legacy boot mode. I got into a Linux console saying that I was missing grub.exe, so I looked up how to fix it. It suggested going back into windows. So I took out the USB stick and rebooted. It booted to a screen that says this:
    Intel UNDI, PXE-2.1 (build 083)
    Copyright (C) 1997-2000 Intel Corporation

    This Product is covered by one or more of the following patents:
    US6, 570, 884, US6, 115, 776, and US6, 327, 625

    Realtek PCIe FE Family Controller Series v1.35 (06/04/14)

    CLIENT MAC ADDR: 34 E6 D7 7C 99 FA GUID: 44454C4C-3800-1044-8036-B6C04F533332
    PXE-E53: No boot file name recieved

    PXE-M0F: Exiting PXE ROM.
    No Boot Device Found. Press any key to reboot the machine_
      My ComputerSystem Spec

  2.    21 Dec 2016 #2

    Your hard drive with Windows on it is set up for UEFI booting. You are now trying to boot it in Legacy mode. Switch back to UEFI mode to boot from the hard drive.
      My ComputerSystem Spec

  3.    22 Dec 2016 #3

    I saw a tutorial to boot from USB, and installed the code on the USB.
    As stated, just reverse what you did in the Bios to boot normally.
    What "Code" did you install to a USB? is it from an ISO Image to install an OS, like Linux? Did you burn the USB Flash correctly? Have you tried booting the USB from another computer?
    Though some people on here don't like it, you can create a UEFI Bootable USB Flash drive with Rufus, in my signature, if you have an ISO image of a installer you want to use, so you won't have to make changes to the Bios.
      My ComputerSystem Spec


Related Threads
EDIT What actually went wrong and how to prevent this from happening to you: Solution #1 (slightly longer & requires two drives, but worked perfectly): Image your C:/ partition using Macrium, format & reinstall Windows (without any other...
Is there currently any way to configure a custom boot logo for UEFI booting? I can only find methods for Legacy users, but no luck with UEFI. I'm kind of new to custom boot logos, so if anybody could give me some information as to if it's...
My current windows 10 installation is too bogged down to play games properly. I've tried all the traditional solutions to speed up my PC but none of them made any noticeable difference, so I'd like to try a fresh OS. I'd prefer to avoid doing a... guys in my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 ...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:09.
Find Us