Windows 10: 10122 problems

Page 1 of 2 12 LastLast
  1.    23 May 2015 #1

    10122 problems


    I was impressed up to this build. Now the start screen icons that I create are blurred even when I choose the small size. Insider hub is much slower loading as are many other things. The whole thing seems to be suddenly clunky and slow. Why does it now need 3 clicks to use the start button? That in itself is a fundamental fail. For me the last build was infinitely better.
      My ComputerSystem Spec

  2.    23 May 2015 #2

    The first issue is a known issue that has been mentioned numerous times in numerous threads. It will get fixed.

    Those other problems are likely related to the upgrade.. and would go away in a clean install.

    Alternatively, you could try the Component store repair and sfc. After an upgrade, I always perform the following actions:

    1) Run Disk Cleanup, selecting to cleanup system files, then selecting all.
    2) From an elevated command prompt type the following three commands (they might take a while):

    Dism /Online /Cleanup-Image /CheckHealth
    Dism /Online /Cleanup-Image /ScanHealth
    Dism /Online /Cleanup-Image /RestoreHealth

    3) from the same command prompt, type "sfc /scannow" (again, might take a while).

    Then reboot. And I find most problems go away. If they persist, then clean-install may be the only choice.
    Last edited by Brink; 23 May 2015 at 18:29. Reason: removed unneeded comment
      My ComputerSystem Spec

  3.    23 May 2015 #3

    For me, one click to the start menu.
      My ComputerSystem Spec


  4. Posts : 324
    Win 7 Pro/32, Win 10 Pro/64/32
       23 May 2015 #4

    Beta test installers are notoriously sloppy (sometimes also called 'Buggy')
    So when ever I get an install (always a CLEAN install) that seems to be Buggy, I just reformat and reinstall, giving much attention to every detail during the install, and normally things turn out right.

    Yesterday, I installed 10122/64 to a spare HD on my main system. My main HD was disabled so as to not be affected by the install.
    Everything went according to plan and the new OS is running great. To give it the best test, I'm running it in its native form, without the addition of the Classic Shell. It's much harder that way, but I'm getting a true evaluation of what the program (OS) is all about.
    I've had NO problems with it at all.

    Edge was/is a total waste of megabytes! So I'm using Firefox, which works great on W-10.
    After re-activating 'Windows Mail' I'm all set up with my five GMail accounts and they too are working great.
    All that was done in just one day.
    I even went into MSCONFIG/Boot.ini, and did the boot-speed-up tweaks and they work just fine, as they did on Windows 7.

    Just under the surface of the Windows 10 skin, lies a much older operating system. MSCONFIG still works like it did even back to XP, likewise Regedit, Services.msc, etc. What's old is new again!!! Eh?

    I'm sure looking forward to the final release, like I'm sure so many others are.

    Cheers Mates and Happy Memorial Day,
    Last edited by TechnoMage; 23 May 2015 at 19:04.
      My ComputerSystem Spec


  5. Posts : 92
    64-bit 10240 10 Pro
       23 May 2015 #5

    IMHO this is the best build yet if you did a clean install. For me everything works that did not in prior builds. I do not use Edge but I use Firefox which works great in 10. There also is a Windows 10 Manger Beta out that if free so far which helps in cutting down the useless services.
      My ComputerSystem Spec


  6. Posts : 4,333
    Win 10 Pro x64
       23 May 2015 #6

    Yeah. This build is great so far.
    I like what they've done with the Start Menu but still can't make it narrower. Not everyone likes a big tile on start menu like me.

    Click image for larger version. 

Name:	10122_startmenu.png 
Views:	58 
Size:	71.0 KB 
ID:	19739
      My ComputerSystem Spec


  7. Posts : 2,033
    Ubuntu14.04x64 MintMate17x64 Win10Prox64
       23 May 2015 #7

    Graulges said: View Post
    I was impressed up to this build. Now the start screen icons that I create are blurred even when I choose the small size. Insider hub is much slower loading as are many other things. The whole thing seems to be suddenly clunky and slow. Why does it now need 3 clicks to use the start button? That in itself is a fundamental fail. For me the last build was infinitely better.
    I do agree with you. So far what I did:
    1. Every build. I did a clean install
    2. SFC & DISM are clean
    3. In earlier build. They had an option: "Pin To Start List" and was taken out in later build. However, I've heard that they'll put it back with build 10125.

    Start menu will act normally until you start to pin 10 or more third party apps then Start Menu starts to act up. Pinned Items resize by itself, Multiple clicks required to get the menu to show up. So definitely, something is not working right. I ended up unpin all the items so only thing left is the Allapps on the left.

    To be honest, I don't really care how they come up with the Start Menu. I don't use it even with Vista, 7, 8 or 10. I just configure the way I think it works best for me ie. Quick Launch Toolbar.
      My ComputerSystem Spec


  8. Posts : 8,312
    Windows 10 Professional
       23 May 2015 #8

    Not necessarily a problem but Task Manager takes ages to load, mind you, there's a heck of a lot of tasks running!
      My ComputersSystem Spec

  9.    23 May 2015 #9

    Graulges said: View Post
    I was impressed up to this build. Now the start screen icons that I create are blurred even when I choose the small size. Insider hub is much slower loading as are many other things. The whole thing seems to be suddenly clunky and slow. Why does it now need 3 clicks to use the start button? That in itself is a fundamental fail. For me the last build was infinitely better.
    As far as I can tell, the build is more stable. I can run my Nvidia Surround even with custom resolutions.

    It does take a long time to boot and usually about 45 seconds from the spinning dots to the Logon. I can tell if I am booting Windows 8.1 or Windows 10 just by the delay...

    What the others did not mention is the preview is being monitored by Microsoft. I would say at least some of the delay is due to logs or data being collected about the operation of the OS.

    The video resolution you mention is noticeable enough for me that I put my gaming system back to Windows 8.1. When I compare the Windows 10 to 8.1 display on my triple monitors, it looks like someone has cleaned the windows so I can see more clearly and the colors are more vibrant.. No pun intended.. but this may be something Nvidia and Microsoft still need to work out.
      My ComputerSystem Spec


  10. Posts : 2,033
    Ubuntu14.04x64 MintMate17x64 Win10Prox64
       23 May 2015 #10

    Edwin said: View Post
    Not necessarily a problem but Task Manager takes ages to load, mind you, there's a heck of a lot of tasks running!
    Edwin,
    Just put an exclusion in Windows Defender for C:\Windows\System32\Taskmgr.exe then it will start instantly.
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Hi, New to this Forum. I have a Hp-Stream 13, which I installed Windows 10. I immediately started having problems with Wifi. The image on the taskbar shows a partially yellowed out Wifi Icon. When I try to go online a windows message comes...
since build 10122 in Windows Updates and Activation
Ever since build 10122 installed, my PC has been going round and round "Checking for updates." It goes on for hours and hours. It finally ends with " There were some problems installing updates. We'll try again later. error (0x800705b4) This has...
Solved 10122 iso ? in General Support
I just decided to do a clean install. It's time, 'cause I didn't do one since 8xxx, and while updating to 10122 today, it had some problems. Had only a gray screen (no desktop, no nothing). Ran a sfc /scannow, and now I have the desktop and the...
I upgraded to 10074 with no problems but trying to upgrade to 10122 gets error fbl_impressive Professional 10122 - Error 0xd0000225. I'm logged into my Microsoft account, so I don't think that's the problem. I've cleaned up all the files and...
10122 esd location in Installation and Upgrade
Is the .esd for build 10122 still @ C:/recoveryimage/install.esd? It has a 4/28/15 date with the same memory size 2,490,323 kb? as last build.
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:46.
Find Us