New
#1
Shutdown/Sleep Issue.
Hi all, wondering if anyone can offer any thoughts or advice.
i'm running W10 from a W7 upgrade, and it's been pretty good so far. last night though i had an issue that occurred once before a month or so back.
basically, i went to shut down, and instead of the usual blue screen and "waiting for apps to close" type thing, the machine seemed to go into sleep; i could hear the fans running. i fired up, and on boot i had the issue i had the other month - i get the BIOS splash, the swirly dots, and then instead of the time/seaside cave i got a black screen w/ just a mouse pointer. i ended up having to hard reboot from the power button.
there's not much in the events, a bunch of 414s relating to media centre, but there are a couple that seem odd to a noob like me. this happened before i powered off and noticed the hang:
"The description for Event ID 56 from source Application Popup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
ACPI
5
the message resource is present but the message is not found in the string/message table"
there's a few 7031 Events that Windows site says is apparently being investigated
and after the hard reboot i've got an Evetn 17 saying
"A corrected hardware error has occurred.
Component: PCI Express Root Port
Error Source: Advanced Error Reporting (PCI Express)
Busevice:Function: 0x0:0x1C:0x0
Vendor IDevice ID: 0x8086:0xA110
Class Code: 0x30400
The details view of this entry contains further information."
i've looked in device manager, no "!" markings etc.
aside from than, all seems ok, no dumps, BSODs etc.
TIA
EDIT:
just happened again, actually got the blue "waiting for 2 programs to close" etc, seemed to do that, powered down but the fans were running again. hard quit using the butting and powered up - came on fine, no "did not shut down cleanly" etc, more 414 Events and one 7026
"The following boot-start or system-start driver(s) did not load:
dam"
cheers
Last edited by wolfie138; 30 Aug 2016 at 05:29.