Page 1 of 5 123 ... LastLast
  1.    03 Aug 2016 #1
    Join Date : Jul 2015
    Posts : 145
    Windows 10

    Local Activation Permission


    At each boot, event Log error writes...

    "The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {8D8F4F83-3594-4F07-8369-FC3C3CAE4919}
    and APPID {F72671A9-012C-4725-9D2F-2A4D32D65169}
    to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable)."

    In this case, the usual fix cannot be made because the Default isn't listed (value not set) for Local Machine registry entry App ID {F72671A9-012C-4725-9D2F-2A4D32D65169}. Thus, it's unknown what DCOMCNFG item to open, so that Local Service|Local Activation can be added.

    Your thoughts?
    Last edited by borgus; 03 Aug 2016 at 12:54.
      My ComputersSystem Spec
  2.    03 Aug 2016 #2
    Join Date : Oct 2015
    Posts : 8
    Windows 10

    I have the exact same error. The usual fix with runtime broker doesn't work. I can't work out what DCOMCNFG item this is either. Very frustrating.
      My ComputerSystem Spec
  3.    03 Aug 2016 #3
    Join Date : Jul 2015
    Posts : 145
    Windows 10
    Thread Starter

    Quote Originally Posted by thecaretaker View Post
    I have the exact same error. The usual fix with runtime broker doesn't work. I can't work out what DCOMCNFG item this is either. Very frustrating.
    It's not always RunTime Broker, but can be Immersive Shell, WSearch and others. The name most always shows up when the HKEY_LOCAL_MACHINE AppID "Default" entry is displayed in the right column - in this case {F72671A9-012C-4725-9D2F-2A4D32D65169}.

    The key was right-clicked and exported for safety. Then it was deleted, and the error vanished.

    Interestingly, when Dcom was opened later it prompted to update a missing entry, which was done. Thereafter the AppID reappeared in the registry and its default was listed as CDP Remote Text Handler. No further edits/additions were made to that entry in Dcom.
    Last edited by borgus; 05 Aug 2016 at 13:54.
      My ComputersSystem Spec
  4.    03 Aug 2016 #4
    Join Date : Oct 2015
    Posts : 8
    Windows 10

    Thanks, I'll give that a try.

    Just to be sure, the error shows in event viewer as:

    Log Name: System
    Source: Microsoft-Windows-DistributedCOM
    Date: 03/08/2016 17:54:07
    Event ID: 10016
    Task Category: None
    Level: Error
    Keywords: Classic
    User: SYSTEM
    Computer: xxxx
    Description:
    The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
    {8D8F4F83-3594-4F07-8369-FC3C3CAE4919}
    and APPID
    {F72671A9-012C-4725-9D2F-2A4D32D65169}
    to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10016</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2016-08-03T16:54:07.636131500Z" />
    <EventRecordID>6821</EventRecordID>
    <Correlation />
    <Execution ProcessID="936" ThreadID="976" />
    <Channel>System</Channel>
    <Computer>xxxx</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <EventData>
    <Data Name="param1">application-specific</Data>
    <Data Name="param2">Local</Data>
    <Data Name="param3">Activation</Data>
    <Data Name="param4">{8D8F4F83-3594-4F07-8369-FC3C3CAE4919}</Data>
    <Data Name="param5">{F72671A9-012C-4725-9D2F-2A4D32D65169}</Data>
    <Data Name="param6">NT AUTHORITY</Data>
    <Data Name="param7">SYSTEM</Data>
    <Data Name="param8">S-1-5-18</Data>
    <Data Name="param9">LocalHost (Using LRPC)</Data>
    <Data Name="param10">Unavailable</Data>
    <Data Name="param11">Unavailable</Data>
    </EventData>
    </Event>
      My ComputerSystem Spec
  5.    03 Aug 2016 #5
    Join Date : Oct 2015
    Posts : 8
    Windows 10

    Changing permissions so I could delete HKEY_LOCAL_MACHINE AppID {F72671A9-012C-4725-9D2F-2A4D32D65169} has fixed it. No more error. No noticed adverse effect. Thanks for your help.
      My ComputerSystem Spec
  6.    03 Aug 2016 #6
    Join Date : Jul 2015
    Posts : 145
    Windows 10
    Thread Starter

    Quote Originally Posted by thecaretaker View Post
    Changing permissions so I could delete HKEY_LOCAL_MACHINE AppID {F72671A9-012C-4725-9D2F-2A4D32D65169} has fixed it. No more error. No noticed adverse effect. Thanks for your help.
    None noted here as well - yet. ^_^
    Last edited by borgus; 05 Aug 2016 at 13:54.
      My ComputersSystem Spec
  7.    03 Aug 2016 #7
    Join Date : Nov 2015
    Posts : 41
    Windows 10 Pro

    Quote Originally Posted by thecaretaker View Post
    Changing permissions so I could delete HKEY_LOCAL_MACHINE AppID {F72671A9-012C-4725-9D2F-2A4D32D65169} has fixed it. No more error. No noticed adverse effect. Thanks for your help.
    So I simply delete this entry in the registry and all is resolved?
      My ComputerSystem Spec
  8.    03 Aug 2016 #8
    Join Date : Jul 2015
    Posts : 145
    Windows 10
    Thread Starter

    Quote Originally Posted by Sayjimwoo View Post
    So I simply delete this entry in the registry and all is resolved?
    There are no guarantees that what works for one system will succeed on another, and there's always the risk of problems - especially when editing the registry. It's always best to have a system back up. And you might consider simply living with the error message; it appears to have no negative consequences.

    That said, if your error message is exactly the same as listed here, and you first right-click and EXPORT the registry entry to a convenient folder, you should be able to restore it if things go awry.

    Per the earlier posts, after deleting the entry RUN the command "DcomCnfg" and drill down through COMPUTERS|MY COMPUTER|DCOMCNFG. If it behaves as it did here you should be prompted for a missing entry. Answer YES. Then exit the box.
      My ComputersSystem Spec
  9.    03 Aug 2016 #9
    Join Date : Aug 2016
    Posts : 6
    Windows 10 Home

    I got the same error. When I looked in the registry, the CLSID said CDP Activity Store. The AppID "Default".
    When I opened DCOM config, though, there was no such entry and I wasn't prompted for anything.
    The only item called CDP was CDP Reference Host.
    If I had to guess I'd say they were related, but so far there doesn't seem to be any info out there on how or what either of them are.
    One thing I did notice was that I could modify this entry if I knew how it had to be modified (and that it was the right one). But without knowing I'm going to wait.
    Depending on my search wording I also found a lot of technical references to CDP in Windows Server on Technet, and this on VMware:
    https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1007069

    Does that tell anyone anything?
    Last edited by guitardis; 04 Aug 2016 at 13:32.
      My ComputerSystem Spec
  10.    03 Aug 2016 #10
    Join Date : Jul 2015
    Posts : 145
    Windows 10
    Thread Starter

    You may find that the usual procedure to correct it (below) does not work for this specific error.

    1. Open Regedit.
    2. Go to HKEY_Classes_Root\CLSID\*CLSID*.
    Note: *CLSID* stand for the ID that appears in your event viewer error.
    3. Right click on it then select permission.
    4. Click Advance and change the owner to Administrators. Also click the box that will appear below the owner line.
    5. Apply full control.
    6. Close the tab then go to HKEY_LocalMachine\Software\Classes\AppID\*APPID*.
    Note: *AppID* is the ID that appears in your event viewer.
    7. Right click on it then select permissions.
    8. Click Advance and change the owner to Administrators (not Administrator).
    9. Click the box that will appear below the owner line.
    10. Click Apply and grant full control to Administrators. (leave REGEDIT open)

    For the specific error that's the subject here, the AppID "Default" will not list a Data entry. It will instead show "(value not set)". Thus, the steps just outlined can be followed to grant full permissions to both the CLSID and the AppID. But from that point follow my second post. The steps below shouldn't be needed.

    11. Press Windows key and R, to bring up the RUN box.
    12. Type dcomcfg and <enter>
    13. Click Computer, click my computer, then click DCOM.
    14. Look for the corresponding service (in the Data column) that appears as the AppID "Default" entry.

    As an example, look for the one that appeared at the right panel of the RegEdit. For example, the AppID Registry (316CDED5-E4AE-4B15-9113-7055D84DCC97) contains the "Immersive Shell" Data with a (Default) as a name. So in DCom you would search for "Immersive Shell."

    15. Right click on it then click properties.
    16. Click security tab then click Customize in the Launch and Activation permissions section. Click Edit. Click Add. Add Local Service. Then apply.
    17. Tick the Local Activation box.
    Last edited by borgus; 03 Aug 2016 at 23:31.
      My ComputersSystem Spec

 
Page 1 of 5 123 ... LastLast


Similar Threads
Thread Forum
Local Permission Hang - Plz Assist me
Am on Win 10 (64 Bits) and whenever I am using IE it suddenly stops responding and then sometime I can close via task manager and everything works and sumtimes whole computer freezes with most icons on taskbar missing - then I have to restart the...
General Support
Solved Need Administrator Permission
I'm trying to replace calc.exe in the System 32 folder with a version from XP, but keep getting a notice that I don't have permission. I'm in as the Administrator, what more do I need to do? Thanks!
Performance & Maintenance
I do not have permission????
I created a new user profile in windows 10 with administrator permission. Now when I try to access a file on drive f, I am denied permission to even open the folder. l hate windows permission, since I am the only one that has access to my...
General Support
Permission Issues
Windows 10 seems to have developed an issue for me that is causing UAC-like prompts suggesting that I need Administrator permission. I should probably mention that I am actually using the real Administrator account (this was an upgrade installation...
General Support
Solved Activation woes - Windows needs activation to personalize
Hi there anybody else got this -- trying to personalize PC -got you need to activate windows before you can personalize PC. Now what do I do !!!!!?! Is this normal (I did an UPDATE rather than a new install BTW). Cheers
Windows Updates and Activation
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 19:47.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums