Windows 10: BIOS fast boot mistake

  1.    18 Jul 2016 #1

    BIOS fast boot mistake


    I just wanted to install Kalilinux in my windows(dual boot).So I was watching a tutorial,then i went to BIOS then just enabled fastboot,(because i just thought that would speed up the pc),But now i am unable to enter into BIOS to install linux.I dont want to remove the CMOS battery(I am not a hardware pro),I wanted to see if there is any other fix.

    NOTE:
    Don't post any tutorial how to reset CMOS.
      My ComputerSystem Spec


  2. Posts : 20,725
    64-bit Windows 10 Pro build 16199
       18 Jul 2016 #2

    Hello Sasidev,

    You could use the method in the top tutorial below to boot to your UEFI firmware settings from within Windows 10, then be able to disable Fast Boot.

    https://www.tenforums.com/tutorials/5...dows-10-a.html

    https://www.tenforums.com/tutorials/2...ws-8-10-a.html
      My ComputersSystem Spec

  3.    19 Jul 2016 #3

    Brink said: View Post
    Hello Sasidev,

    You could use the method in the top tutorial below to boot to your UEFI firmware settings from within Windows 10, then be able to disable Fast Boot.

    https://www.tenforums.com/tutorials/5...dows-10-a.html

    https://www.tenforums.com/tutorials/2...ws-8-10-a.html
    I have no uefi firmware settings
      My ComputerSystem Spec


  4. Posts : 20,725
    64-bit Windows 10 Pro build 16199
       19 Jul 2016 #4

    What is the brand and model number of your motherboard, or PC (if OEM)?
      My ComputersSystem Spec


  5. Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       19 Jul 2016 #5

    Sasidev said: View Post
    .....
    i went to BIOS then just enabled fastboot
    now i am unable to enter into BIOS to install linux.

    I dont want to remove the CMOS battery(I am not a hardware pro), I wanted to see if there is any other fix.
    Are you saying that you cannot enter BIOS at all, or
    you cannot enter BIOS to install Linux?

    If you cannot enter BIOS, then your only choice is to reset CMOS

    1. Shut down your machine

    2. Disconnect the AC jack & remove the battery

    3. Press and hold the Power button for two full minutes to drain the charge

    4. Insert the battery and connect the AC jack

    5. Start your machine
      My ComputerSystem Spec


 

Related Threads
Howdy: Looking for guidance on optimal settings for new Dell system before I fire it up (specs in my profile). This is my first Win10 system and my first desktop, "production box" PC with dual drives (SSD (OS) + spinner (data)) and UEFI. ...
when fast start up is activated, I cannot enter the BIOS by tapping a designated key . If windows can be loaded, I may disable the fast start up, or simple click the Restart, then tap the designated key during next start up. How do I enter the...
Slow warm boot & Fast cold boot in Performance & Maintenance
Hello, My Lenovo laptop is pretty fast at cold boot. It takes about 12 seconds from initial bios screen to desktop. On the other hand, warm boot is really slow. The same period takes about 51 seconds, involving a long black screen. ...
Control Panel\All Control Panel Items\Power Options\System Settings Unchecking the "Turn on Fast Startup" command in the above setting path does not do it. There is supposed to be a motherboard software for enabling a normal startup the next...
Solved Turning off secure boot/fast boot required? in Installation and Upgrade
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot? I have had limited success with previous installs to a 2nd hard...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:20.
Find Us