Page 2 of 2 FirstFirst 12

  1. Joined : Aug 2015
    Ontario, Can
    Posts : 125
    Windows 10-1607
       10 Jan 2016 #11

    [QUOTE=Scimitar;529686. I'm going to have to refer this issue to a local computer tech shop to find a remedy. .[/QUOTE]
    Likely every 'wake' possibility will be examined in the advanced power plan. I did that; disabled every possible item and only left mouse,keyboard with a 'wake' possibility.
    There appears to be a higher number of HP machines reporting this issue but mine is a custom build. Of course, there could be a higher number of HP machines sold but my 'unscientific' thought is that it is an operating system code within the Nov. upgrade which reacts to some machine configurations. It appears to be sleep, hibernation and power connected.
    I'm just suggesting to not have 'high hopes' on the service checkup.

    This was a suggestion in one of the many posts I poured through recently
    'the power plan resets to an unknown default after every cumulative update.
    Then, the computer will not shut down or it will shut down and restart instantly.
    Solution create a new power plan.Restart, then default to original power plan,
    Restart and it should shut down normally including a screensaver function. '

    In this description I'm not clear on 'HOW' one does the 'default to original power plan.
    ....then there is the 'should' in the last line
      My System SpecsSystem Spec


  2. Joined : Jan 2016
    Posts : 7
    Windows 10 Pro 64 bit
       10 Jan 2016 #12

    Thanks for this Rose W. I've scoured and posted on various tech boards and the consistent outcomes seem to be "create a new power plan and do a clean install." According to one source, my computer is unsupported in the free W10 upgrade from W7 and the W10 drivers don't work with my hardware. Not the best news. Anyway, the clean install with have have to wait until I have a window of opportunity - I'll see what happens and report back here if it works.
      My System SpecsSystem Spec


  3. Joined : Jan 2016
    Henderson
    Posts : 145
    Windows 10 Pro
       10 Jan 2016 #13

    Scimitar said: View Post
    Reply to caperjack: I ran the commands you provided and here are the results:

    (1) sfc /scannow - Windows Resource Protection found some corrupt files but was unable to fix some of them. Details are in CBS.Log Windows\Logs\CBS\CBS.log. Note that logging is not currently supported in offline servicing scenarios.

    (2) Dism.exe /online /Cleanup-Image /StartComponentCleanup - completed successfully.

    (3) sfc /scannow - Windows Resource Protection found some corrupt files but was unable to fix some of them. Details are in CBS.Log Windows\Logs\CBS\CBS.log. Note that logging is not currently supported in offline servicing scenarios.

    (4) Dism /Online /Cleanup-Image /RestoreHealth - Error 0x800f081f
    The source files couldn't be found. For information on specific source locations go http:go.microsoft.com/fwlink/?LinkId=243077. The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log. I saved this log as a Notebook file if that's any help.

    (5) sfc /scannow - Windows Resource Protection found some corrupt files but was unable to fix some of them. Details are in CBS.Log Windows\Logs\CBS\CBS.log. Note that logging is not currently supported in offline servicing scenarios.
    Try this...It will fix everything and your system will thank you for it...Another member posted this. I've used it a few times and 100% effective.
    This way requires you to have an isodownloaded from Tech Bench.You absolutely have to use the Techbench iso so the restore health can read it
    https://www.microsoft.com/en-us/soft...load/techbench

    Once you have it downloaded from Tech Bench, right click at it > click Mount> leave it there.
    Now go back to your elevated command prompt, at the flashing prompt, copy/pastethis command line......................

    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:H:\sources\install.wim:1 /limitaccess

    Note : H is the drive where the iso is mounted. CHANGE it if YOUR drive mount letter is different. Go to my PC to view the drive letter off the mount.

    DISM - Repair Windows 10 Image

    When it is completed, you should get the report that the operation issuccessful.
    Now run the sfc /scannow again. It should be ok this time.

    You may have to run SFC a few times to repair everything
    Last edited by AnEdge; 10 Jan 2016 at 16:44.
      My System SpecsSystem Spec


  4. Joined : Mar 2014
    Cape Breton Nova Scotia ,Canada
    Posts : 2,926
    insider build 10586.3 win10 pro 64
       10 Jan 2016 #14

    create a new power plan and do a clean install
    the new power plan will be gone after the clean install, but a clean install would be a good thing .especially after upgrading from win7,, get the latest win10 iso and run it from the desktop and and do a inplace update,, just search the tutorials for the how to

    here is that tutorial .
    Repair Install Windows 10 with an In-place Upgrade
      My System SpecsSystem Spec


  5. Joined : Jan 2016
    Posts : 7
    Windows 10 Pro 64 bit
       11 Jan 2016 #15

    Thanks, AnEdge and caperjack for the continued help. This looks promising. I'll report back when I've completed the described steps.
      My System SpecsSystem Spec


 
Page 2 of 2 FirstFirst 12


Similar Threads
Thread Forum
Solved Norton 360 wont run on this version of Windows... (update 1511 10586.3
MS made me update a couple of days ago. I just discovered this morning that it disabled Norton 360. It also removed CCLeaner, and turned off my Norton firewall. I have to reauthorize some other products but my main problem is that I don't know if I...
AntiVirus, Firewalls and System Security
Failed: Upgrade to Windows 10 Enterprise, version 1511, 10586
The windows update 'Upgrade to Windows 10 Enterprise, version 1511, 10586' fails with 'Windows can't be installed because this PC has an unsupported disk layout for UEFI firmware'. This PC (laptop) is running Windows-To-Go (Windows 10) from a an...
Windows Updates and Activation
Solved Still can't update to windows 10 Home, version 1511, 10586.
Hi, The Windows 10 Home, version 1511 10586 update came out a while ago now, and everyday since I've tried installing it and yet I still can't. It downloads fine, but then when I need to restart to "finish the update", I'm presented with the error...
Windows Updates and Activation
Windows can't finish installing version 1511, 10586.
Hi, I downloaded the most recent update today, and when it came to restarting my computer to finish the install windows showed this error message: https://i.gyazo.com/52eea1403ce9b5b91b7b0ff9085299cc.png With the error code 0x80070032. When I...
Windows Updates and Activation
Windows 10 version 1511 10586 app issues
I just upgraded my windows 10 pc to the 1511 version. I have (on the start menu) icons for photos, calendar, camera, maps, solitaire, news, get office, sports, one note all with a exclamation mark in a circle. When I click on any it says app not...
Software and Apps
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:24.
Find Us
Twitter Facebook Google+



Windows 10 Forums