Windows 10: Event Log error

Page 1 of 2 12 LastLast
  1.    04 Dec 2015 #1

    Event Log error


    Any idea what would be causing this?

    svchost (3972) Database recovery/restore failed with unexpected error -566.

    Many instances of this error in my event log.

    Running windows 10 pro with November update....

    Thanks.
      My ComputerSystem Spec

  2.    04 Dec 2015 #2

    Hi,

    Could be due to corrupted files.

    From command prompt admin run sfc /scannow and report back the result pls.

    Cheers,
      My ComputersSystem Spec

  3.    04 Dec 2015 #3

    fdegrove said: View Post
    Hi,

    Could be due to corrupted files.

    From command prompt admin run sfc /scannow and report back the result pls.

    Cheers,
    Ran the SFC scan - windows found corrupt files but was unable to fix some of them Now what?
      My ComputerSystem Spec

  4.    04 Dec 2015 #4

    Hi,

    Press Windows key + X, select ‘Command prompt (Admin)’.
    In the Command prompt window, type the following commands and press enter after each command:
    DISM.exe /Online /Cleanup-image /Scanhealth
    DISM.exe /Online /Cleanup-image /Restorehealth

    If the repair operation is unsuccessful pls let me know.

    Best,
      My ComputersSystem Spec

  5.    04 Dec 2015 #5

    fdegrove said: View Post
    Hi,

    Press Windows key + X, select ‘Command prompt (Admin)’.
    In the Command prompt window, type the following commands and press enter after each command:
    DISM.exe /Online /Cleanup-image /Scanhealth
    DISM.exe /Online /Cleanup-image /Restorehealth

    If the repair operation is unsuccessful pls let me know.

    Best,
    Scan health completed OK - restore health did not.

    Error 0x800f081f
    The source files could not be found.
    Use the "source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
      My ComputerSystem Spec

  6.    04 Dec 2015 #6

    Hi,

    Yeah....Thought as much.
    Do you happen to have any form of install media for the Win10 version you're running ? ISO file, USB stick or whatever.

    If so, either mount the ISO file from within explorer or plug in your device and check if there's either a install.wim or install.esd file present in the sources directory (or x86, x64 directory).


    Then run either of the following commands from (admin) prompt according to .esd or .wim and replace E:\ with the drive letter that your systems has assigned to it:

    Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:E:\Sources\Install.esd:1 /limitaccessDism /Online /Cleanup-Image /RestoreHealth /Source:wim:E:\sources\install.wim:1 /limitaccess

    Make sure before you start that your source for repair corresponds with the version of the OS you're running, i.e. 10240 if you haven't upgraded yet or 1511 (10586) if you have upgraded.

    I often obtain best results using a .wim file as a source but give it a go either way.

    No guarantee that it will solve your problem but at least you'll then have a clean system for further troubleshooting if needed.

    Best,
      My ComputersSystem Spec

  7.    04 Dec 2015 #7

    fdegrove said: View Post
    Hi,

    Yeah....Thought as much.
    Do you happen to have any form of install media for the Win10 version you're running ? ISO file, USB stick or whatever.

    If so, either mount the ISO file from within explorer or plug in your device and check if there's either a install.wim or install.esd file present in the sources directory (or x86, x64 directory).


    Then run either of the following commands from (admin) prompt according to .esd or .wim and replace E:\ with the drive letter that your systems has assigned to it:

    Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:E:\Sources\Install.esd:1 /limitaccessDism /Online /Cleanup-Image /RestoreHealth /Source:wim:E:\sources\install.wim:1 /limitaccess

    Make sure before you start that your source for repair corresponds with the version of the OS you're running, i.e. 10240 if you haven't upgraded yet or 1511 (10586) if you have upgraded.

    I often obtain best results using a .wim file as a source but give it a go either way.

    No guarantee that it will solve your problem but at least you'll then have a clean system for further troubleshooting if needed.

    Best,
    I have the install DVD I created from the November update ISO. I see an install.esd file located on the DVD here:

    F:\X64\sources
      My ComputerSystem Spec

  8.    04 Dec 2015 #8

    Hi,

    OK, fine.

    Give that a shot. Just make sure the path in the command line points to the right source.

    Cheers,
      My ComputersSystem Spec

  9.    04 Dec 2015 #9

    fdegrove said: View Post
    Hi,

    OK, fine.

    Give that a shot. Just make sure the path in the command line points to the right source.

    Cheers,
    Ran this command and its telling me the source files cannot be found..?

    Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:F:\x64\Sources\Install.esd:1 /limitaccess
      My ComputerSystem Spec

  10.    04 Dec 2015 #10

    Azucho98 said: View Post
    Ran this command and its telling me the source files cannot be found..?

    Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:F:\x64\Sources\Install.esd:1 /limitaccess
    I also have a DVD with only the 64 bit version - Ran the following command and it completed successfully:

    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:F:\sources\install.wim:1 /limitaccess



    I re-ran sfc /scannow. This time it was able to fix corrupt files - nothing mentioned about corrupt files that couldn't be fixed.

    Anything more I should do?
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Persistent Event Viewer Error in Performance & Maintenance
I'm getting the following event viewer error every 15-30 minutes whenever a non-admin account is logged in: The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID ...
Event 213 Error 80070005 TileDataLayer in Performance & Maintenance
I have a lot of these errors. Everything seem to work normally. Curious to know what this means and above all, how to solve it (if necessary) Thanks = Type : Error Date : 02-12-2015 Time : 21:05:57 Event : 213
This is the event error after attempting to do a regular 'FIND' within the Registry. Before the Fall upgrade installed via .iso on 11/20/2015 this Find worked. The Nirsoft Registry Scan will scan and find. I did not attempt to link to the registry...
Error 7001 in Event Viewer in Performance & Maintenance
Hi, Recently upgraded a second machine from W 7 x64 Home to W 10 x64 Home, upgrade ran without issues, now W 10 run very smooth at the exception of 2 constant errors in Event Viewer, the first is about "SyncHost session terminated unexpectedly"...
Event ID 5 Kernel-General error in Event Viewer in AntiVirus, Firewalls and System Security
Welcome, I have a problem. Every day I have this error in event viewer, system log: {Registry Hive Recovered} Registry hive (file):\??\C:\ProgramData\Malwarebytes\Malwarebytes...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 23:18.
Find Us