New
#11
I shutdown computer after i have finished on it then will leave it switched on at the plug and just turn the screen off so that it stops flashing
If the computer is truly Brand New as in it just came out of the box, then send it back to where you purchased it from and get a free exchange.my brother said my pc is brand new so he has told me not to do anything it might not come up in the future
If your brother means "Brand New" is several months old, you can send it back to the computer/motherboard manufacturer and they will replace it for free,
he built it himself. i didn't buy it from any shop. it's been okay for 3 years he built it in 2019
yep still does the same thing
can't add attachment because to big
but here is link to the image
uefi defaults have been loaded - Album on Imgur
Last edited by alexhob123; 29 Nov 2021 at 12:05.
It doesn't matter if someone built the computer or not, if the Motherboard is brand new it would be under warranty.
A 3 year old computer is not "Brand New" The Bios Update was loaded 12/06/2019
Press F2 or Del to boot into Setup (Bios) set the Bios to Defaults., Go to the Boot tab, under UEFI boot settings there may be a setting for Press F1 if there is an error. If this is Enabled, Disable it, Apply and OK and see if that works.
okay will give it a try i don't think it shows it on my setup screen
- - - Updated - - -
don't understand what you mean dude i hit f2 to open setup but after that i don't understand my bios mode in system info is set to UEFI is this correct. it also says as well hit f2 or delete to run UEFI setup is this correct as well
You are already setup for UEFI, no need to do it again.
Check under the Boot Tab, Disable Secure Boot and Fast Boot. then see if it has a setting for Press F1 if there is an error.If this is Enabled, Disable it, Apply and OK and see if that works.
okay will do fast boot is disabled but i can't see secure boot on Boot Tab and Press F1 if there is an error
fast boot disabled and secure boost is disabled but i can't see press F1 if there is an error section. but it still turns off and back on and comes up with same message when I shutdown my computer properly and then turn it off at the power switch then switch it back on again. so I have no idea what to do
anyone please help me
Last edited by alexhob123; 30 Nov 2021 at 17:37.
Can you explain this a little more?it still turns off and back on and comes up with same message when I shutdown my computer properly and then turn it off at the power switch then switch it back on again.
If you are shutting your computer down properly, you shouldn't have to turn it off at the power switch?
Are you saying that you Shut Down the computer in Windows using the Start Button/Shutdown after it shuts down, the computer restarts and gives you the message to press F1? this would indicate a Hardware Issue with your computer.
Remove all external USB and internal drives other then your Windows Boot drive. Boot into Setup (Bios) set Bios to Defaults, Save and Exit.
no it's when i flick the swtich off at the plug that it is plugged into after i shut it down then it does it after i turn it back on if i want to go on it again. i do turn it off properly of course via start, power, shutdown my brother thinks it something to do with the battery he is going to check tommorow
Last edited by alexhob123; 01 Dec 2021 at 18:29.