How to put back the Windows 10 Pro - Recovery partition ?

Hello everyone,

I have an Asus Z590 motherboard and tried to install the Intel RST Premium driver with Intel Optane system accelerator (RAID), but then I went back to the standard AHCI controller.

However by making this change, a "D" drive appeared to me which is supposed to be the Windows 10 Recovery partition that was previously hidden.

Trying to hide the drive that appeared to me "D", that is the Recovery drive, now I have this drive but it is empty (without any files inside it), someone can tell me how to put the partition back in place recovery with all the necessary files?

I also connected to the system an HP Officejet Pro 6830 multifunction printer which has an integrated usb port.

Before, in system management, together with hard disks, the unit of the printer USB port appeared fixed to me, while now the unit appears to me ONLY if I insert a key into the printer's USB port and this is not good...

Someone help me to re-install the Windows 10 Recovery partition with all the necessary files inside and to make the USB port of the printer appear fixed to me together with the hard disk drives in the devices and drives panel ?

Thanks to those who have the patience and the competence to help me...

topgundcp said:

The Recovery partition is normally hidden and since it's hidden, it appears to be empty but in reality it's not. Open the Admin command prompt and type:
reagentc /info
If it shows Enabled then it's not empty. If it shows Disabled then type: reagentc /enable. If succeeded then you're OK.
If not, post a screenshot of your Disk Management then we'll go from there.

Hi,

I typed the commands you suggested me and this is the results:


C:\WINDOWS\system32>reagentc /info

Informazioni di configurazione per Ambiente ripristino Windowse la reimpostazione del sistema:

Stato Ambiente ripristino Windows: Disabled

Percorso Ambiente ripristino Windows:

Identificatore dati di configurazione di avvio (BCD): 28d2dc23-82ef-11eb-9de4-a28ad8369f9b

Percorso immagine di ripristino:

Indice immagine di ripristino: 0

Percorso immagine personalizzata: Indice immagine personalizzata: 0

REAGENTC.EXE: operazione riuscita.


C:\WINDOWS\system32>reagentc /enable

REAGENTC.EXE: impossibile trovare l'immagine di Ambiente ripristino Windows.



Here is a screenshot of my Disk Management:




Thanks a lot for your help !

Here I am:



Thanks a lot for your help !

Done...

Thanks again !

NO,

I have only:

ReAgent.xml
ReAgent_Merged.xml1



- - - Updated - - -

topgundcp said:

I did not see WinRe.wim, You have 2 .xml files but not WinRe.wim

Exactly:

NO WinRe.wim