New
#21
We are modifying the scripts and instructions as needed.
How come tuneup1.bat was ran instead of tuneup.bat (the posted link)?
How would you modify the instructions?
What problems did you encounter with the posted links?
in post #2?
in post #17?
Thanks, NavyLCDR. When I boot it comes to the RE screen and I have the two Windows installations to choose from. When I choose the newest one, the default that I installed to migrate to, it just reboots and offers the RE screen again until I choose the old Windows installation.
I have a copy of Windows 10 Pro that I cannot install, since the computer must reboot several times and it can't.
- - - Updated - - -
I ran tuneup1.bat by mistake. There is a lot to wade through and I'm old, so that's my excuse. Here's the results of tuneup.bat. I ran tuneup2.bat separately rebooted and ran it again and got the same results as I did when I ran tuneup.bat I'll run DiskParInfo when I get a chance. Thanks zbook
###########################################################
# The following commands will be run in sequence. #
# The first 5 will take quite a while to run, be patient. #
###########################################################
sfc /scannow
dism /online /cleanup-image /scanhealth
dism /online /cleanup-image /restorehealth
sfc /scannow
chkdsk /scan
wmic recoveros get autoreboot
wmic recoveros set autoreboot = false
wmic recoveros get autoreboot
wmic recoveros get DebugInfoType
wmic recoveros set DebugInfoType = 7
wmic recoveros get DebugInfoType
wmic pagefile list /format:list
wmic Computersystem where name="BRENT-ACER-LAPT" get AutomaticManagedPagefile
wmic Computersystem where name="BRENT-ACER-LAPT" set AutomaticManagedPagefile=True
wmic Computersystem where name="BRENT-ACER-LAPT" get AutomaticManagedPagefile
bcdedit /enum {badmemory}
C:\WINDOWS\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\WINDOWS\system32>dism /online /cleanup-image /scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.746
Image Version: 10.0.19042.746
[==========================100.0%==========================] No component store corruption detected.
The operation completed successfully.
C:\WINDOWS\system32>dism /online /cleanup-image /restorehealth
Deployment Image Servicing and Management tool
Version: 10.0.19041.746
Image Version: 10.0.19042.746
[==========================100.0%==========================] The restore operation completed successfully.
The operation completed successfully.
C:\WINDOWS\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\WINDOWS\system32>chkdsk /scan
The type of the file system is NTFS.
Volume label is Acer.
Stage 1: Examining basic file system structure ...
879376 file records processed.
File verification completed.
Phase duration (File record verification): 1.95 minutes.
6785 large file records processed.
Phase duration (Orphan file record recovery): 0.00 milliseconds.
0 bad file records processed.
Phase duration (Bad file record checking): 0.66 milliseconds.
Stage 2: Examining file name linkage ...
25524 reparse records processed.
1036282 index entries processed.
Index verification completed.
Phase duration (Index verification): 3.34 minutes.
0 unindexed files scanned.
Phase duration (Orphan reconnection): 3.33 seconds.
0 unindexed files recovered to lost and found.
Phase duration (Orphan recovery to lost and found): 0.65 milliseconds.
25524 reparse records processed.
Phase duration (Reparse point and Object ID verification): 130.05 milliseconds.
Stage 3: Examining security descriptors ...
Security descriptor verification completed.
Phase duration (Security descriptor verification): 245.20 milliseconds.
78454 data files processed.
Phase duration (Data attribute verification): 0.53 milliseconds.
CHKDSK is verifying Usn Journal...
35374760 USN bytes processed.
Usn Journal verification completed.
Phase duration (USN journal verification): 2.34 seconds.
Windows has scanned the file system and found no problems.
No further action is required.
412302446 KB total disk space.
265378492 KB in 360472 files.
304976 KB in 78455 indexes.
0 KB in bad sectors.
993446 KB in use by the system.
65536 KB occupied by the log file.
145625532 KB available on disk.
4096 bytes in each allocation unit.
103075611 total allocation units on disk.
36406383 allocation units available on disk.
Total duration: 5.40 minutes (324436 ms).
C:\WINDOWS\system32>wmic recoveros get autoreboot
AutoReboot
FALSE
C:\WINDOWS\system32>wmic recoveros set autoreboot = false
Updating property(s) of '\\BRENT-ACER-LAPT\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk0\\Partition3"'
Property(s) update successful.
C:\WINDOWS\system32>wmic recoveros get autoreboot
AutoReboot
FALSE
C:\WINDOWS\system32>wmic recoveros get DebugInfoType
DebugInfoType
7
C:\WINDOWS\system32>wmic recoveros set DebugInfoType = 7
Updating property(s) of '\\BRENT-ACER-LAPT\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk0\\Partition3"'
Property(s) update successful.
C:\WINDOWS\system32>wmic recoveros get DebugInfoType
DebugInfoType
7
C:\WINDOWS\system32>wmic pagefile list /format:list
AllocatedBaseSize=2176
CurrentUsage=73
Description=C:\pagefile.sys
InstallDate=20201223024055.566209-360
Name=C:\pagefile.sys
PeakUsage=121
Status=
TempPageFile=FALSE
C:\WINDOWS\system32>wmic Computersystem where name="BRENT-ACER-LAPT" get AutomaticManagedPagefile
AutomaticManagedPagefile
TRUE
C:\WINDOWS\system32>wmic Computersystem where name="BRENT-ACER-LAPT" set AutomaticManagedPagefile=True
Updating property(s) of '\\BRENT-ACER-LAPT\ROOT\CIMV2:Win32_ComputerSystem.Name="BRENT-ACER-LAPT"'
Property(s) update successful.
C:\WINDOWS\system32>wmic Computersystem where name="BRENT-ACER-LAPT" get AutomaticManagedPagefile
AutomaticManagedPagefile
TRUE
C:\WINDOWS\system32>bcdedit /enum {badmemory}
RAM Defects
-----------
identifier {badmemory}
C:\WINDOWS\system32>Echo off
###################################################################################
# How to capture batch file data and post in your thread in the BSOD forum #
# #
# Batch files and instructions for use in BSOD debugging[Part Two-Four] #
# #
# Press [V] to visit the above web page for detailed instructions. #
# Press [C] to close this window. #
###################################################################################
Tuneup results look good.
When possible please post results for diskparinfo:
DiskParInfo.bat - Click here to go to the BSOD batch repository to download and run this batch file.
and
V2 / DM: BSOD - Posting Instructions
How to Upload and Post Screenshots and Files at Ten Forums
Finally got to it.
Disk 0 : HDD. It has 6 partition(s). Model: ST1000LM048-2E7172
The script has found the above 1 storage device(s) in total.
=======================================================================
Microsoft DiskPart version 10.0.19041.610
Copyright (C) Microsoft Corporation.
On computer: BRENT-ACER-LAPT
Disk ### Status Size Free Dyn Gpt
-------- ------------- ------- ------- --- ---
Disk 0 Online 931 GB 146 GB *
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 0 D Mar 14 2021 UDF DVD-ROM 5741 MB Healthy
Volume 1 C Acer NTFS Partition 393 GB Healthy Boot
Volume 2 F NTFS Partition 390 GB Healthy
Volume 3 ESP FAT32 Partition 100 MB Healthy System
Volume 4 NTFS Partition 538 MB Healthy Hidden
Volume 5 Recovery NTFS Partition 1024 MB Healthy Hidden
Disk 0 is now the selected disk.
ST1000LM048-2E7172
Disk ID: {292AE4AF-3C32-4DFD-B5FA-78B7F585A23F}
Type : SATA
Status : Online
Path : 0
Target : 0
LUN ID : 0
Location Path : PCIROOT(0)#PCI(1700)#ATA(C00T00L00)
Current Read-only State : No
Read-only : No
Boot Disk : Yes
Pagefile Disk : Yes
Hibernation File Disk : No
Crashdump Disk : Yes
Clustered Disk : No
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
Volume 1 C Acer NTFS Partition 393 GB Healthy Boot
Volume 2 F NTFS Partition 390 GB Healthy
Volume 3 ESP FAT32 Partition 100 MB Healthy System
Volume 4 NTFS Partition 538 MB Healthy Hidden
Volume 5 Recovery NTFS Partition 1024 MB Healthy Hidden
Partition ### Type Size Offset
------------- ---------------- ------- -------
Partition 1 System 100 MB 1024 KB
Partition 2 Reserved 16 MB 101 MB
Partition 3 Primary 393 GB 117 MB
Partition 4 Recovery 538 MB 393 GB
Partition 5 Primary 390 GB 393 GB
Partition 6 Recovery 1024 MB 930 GB
Partition 1 is now the selected partition.
Partition 1
Type : c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Hidden : Yes
Required: No
Attrib : 0X8000000000000000
Offset in Bytes: 1048576
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 3 ESP FAT32 Partition 100 MB Healthy System
Partition 2 is now the selected partition.
Partition 2
Type : e3c9e316-0b5c-4db8-817d-f92df00215ae
Hidden : Yes
Required: No
Attrib : 0X8000000000000000
Offset in Bytes: 105906176
There is no volume associated with this partition.
Partition 3 is now the selected partition.
Partition 3
Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Hidden : No
Required: No
Attrib : 0000000000000000
Offset in Bytes: 122683392
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 1 C Acer NTFS Partition 393 GB Healthy Boot
Partition 4 is now the selected partition.
Partition 4
Type : de94bba4-06d1-4d40-a16a-bfd50179d6ac
Hidden : Yes
Required: Yes
Attrib : 0X8000000000000001
Offset in Bytes: 422321324032
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 4 NTFS Partition 538 MB Healthy Hidden
Partition 5 is now the selected partition.
Partition 5
Type : ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
Hidden : No
Required: No
Attrib : 0000000000000000
Offset in Bytes: 422886506496
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 2 F NTFS Partition 390 GB Healthy
Partition 6 is now the selected partition.
Partition 6
Type : de94bba4-06d1-4d40-a16a-bfd50179d6ac
Hidden : Yes
Required: Yes
Attrib : 0X8000000000000001
Offset in Bytes: 999130398720
Volume ### Ltr Label Fs Type Size Status Info
---------- --- ----------- ----- ---------- ------- --------- --------
* Volume 5 Recovery NTFS Partition 1024 MB Healthy Hidden
===============================================================================
Windows Recovery Environment (Windows RE) and system reset configuration
Information:
Windows RE status: Disabled
Windows RE location:
Boot Configuration Data (BCD) identifier: 3ac580d8-3797-11eb-8896-d8fba946ab71
Recovery image location:
Recovery image index: 0
Custom image location:
Custom image index: 0
REAGENTC.EXE: Operation Successful.
===============================================================================
Firmware Boot Manager
---------------------
identifier {fwbootmgr}
displayorder {ff75a43a-82e0-11eb-84ab-806e6f6e6963}
{979d4df3-826f-11eb-ad7f-d8c49733ee81}
{979d4df4-826f-11eb-ad7f-d8c49733ee81}
{979d4df5-826f-11eb-ad7f-d8c49733ee81}
timeout 0
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
path \efi\grub2win\g2bootmgr\gnugrub.kernel64.efi
description Grub2Win EFI - 64 Bit
locale en-us
inherit {globalsettings}
default {default}
resumeobject {979d4dfb-826f-11eb-ad7f-d8c49733ee81}
displayorder {default}
{current}
toolsdisplayorder {memdiag}
timeout 30
Firmware Application (101fffff)
-------------------------------
identifier {979d4df3-826f-11eb-ad7f-d8c49733ee81}
description EFI USB Device
Firmware Application (101fffff)
-------------------------------
identifier {979d4df4-826f-11eb-ad7f-d8c49733ee81}
description EFI DVD/CDROM
Firmware Application (101fffff)
-------------------------------
identifier {979d4df5-826f-11eb-ad7f-d8c49733ee81}
description EFI Network
Firmware Application (101fffff)
-------------------------------
identifier {ff75a43a-82e0-11eb-84ab-806e6f6e6963}
device partition=\Device\HarddiskVolume1
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \WINDOWS\system32\winload.efi
description Windows 10
locale en-us
inherit {bootloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \WINDOWS
resumeobject {979d4df9-826f-11eb-ad7f-d8c49733ee81}
nx OptIn
bootmenupolicy Standard
Windows Boot Loader
-------------------
identifier {default}
device partition=F:
path \Windows\system32\winload.efi
description Windows 10
locale en-us
inherit {bootloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=F:
systemroot \Windows
resumeobject {979d4dfb-826f-11eb-ad7f-d8c49733ee81}
nx OptIn
bootmenupolicy Standard
Resume from Hibernate
---------------------
identifier {979d4df7-826f-11eb-ad7f-d8c49733ee81}
device partition=C:
path \WINDOWS\system32\winresume.efi
description Windows Resume Application
locale en-us
inherit {resumeloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
filepath \hiberfil.sys
bootmenupolicy Standard
debugoptionenabled No
Resume from Hibernate
---------------------
identifier {979d4df9-826f-11eb-ad7f-d8c49733ee81}
device partition=C:
path \WINDOWS\system32\winresume.efi
description Windows Resume Application
locale en-us
inherit {resumeloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
filedevice partition=C:
filepath \hiberfil.sys
bootmenupolicy Standard
debugoptionenabled No
Resume from Hibernate
---------------------
identifier {979d4dfb-826f-11eb-ad7f-d8c49733ee81}
device partition=F:
path \Windows\system32\winresume.efi
description Windows Resume Application
locale en-us
inherit {resumeloadersettings}
isolatedcontext Yes
allowedinmemorysettings 0x15000075
filepath \hiberfil.sys
bootmenupolicy Standard
debugoptionenabled No
Windows Memory Tester
---------------------
identifier {memdiag}
device partition=\Device\HarddiskVolume1
path \EFI\Microsoft\Boot\memtest.efi
description Windows Memory Diagnostic
locale en-us
inherit {globalsettings}
badmemoryaccess Yes
EMS Settings
------------
identifier {emssettings}
bootems No
Debugger Settings
-----------------
identifier {dbgsettings}
debugtype Local
RAM Defects
-----------
identifier {badmemory}
Global Settings
---------------
identifier {globalsettings}
inherit {dbgsettings}
{emssettings}
{badmemory}
Boot Loader Settings
--------------------
identifier {bootloadersettings}
inherit {globalsettings}
{hypervisorsettings}
Hypervisor Settings
-------------------
identifier {hypervisorsettings}
hypervisordebugtype Serial
hypervisordebugport 1
hypervisorbaudrate 115200
Resume Loader Settings
----------------------
identifier {resumeloadersettings}
inherit {globalsettings}
Please run: V2 and DM:
BSOD - Posting Instructions
Post the link here like the one below:
https://mega.nz/file/ZNIVmSQb#0qRXwg...zSwhxKBT9nEg28
It turns out that I am not the only one who uses an HDD as the system disk.