I've hit a wall trying to fix my BOOT issue caused by POWER FAILURE...

Please update the progress with the steps in post #9.

zbook said:

Please update the progress with the steps in post #9.

been running chkdsk /r/v D: ... first 3 stages went fairly quick. Stage 4 : Looking for bad clusters is not... I will post results as soon as it finishes and continue with the other steps. Thanks.

Please update the specs and display results from Dell diagnostics and Sea Tools.

zbook said:

Please update the specs and display results from Dell diagnostics and Sea Tools.

setting up the seatools now... no clue on how to run the Dell diag? I guess it's on the D:> drive. If the only way to run it and get a report is through the cmd. prompt I'd need to buy a clue.

how to run the dell diagnostic test
how to run the dell diagnostic test - Google Search

jmatt said:

how to run the dell diagnostic test
how to run the dell diagnostic test - Google Search

Have you been following this thread jmatt? My hot keys do not function. Anything I do on that PC is being done in the cmd. prompt accessed via the ISO USB. You got a link for that?

- - - Updated - - -

chkdsk /r/v D:

- - - Updated - - -

/rebuildbcd ...

- - - Updated - - -

...

- - - Updated - - -

long "SeaTools" test passed 100%

\/
\ /
Was there a space between the back and forward slashes?
Please rerun making sure that there is a space.

DISM /image:M:\ /cleanup-image /revertpendingactions
(change M: to D:)

DISM /image:M:\ /cleanup-image /restorehealth
(change M: to D:)

sfc /scannow /offbootdir=D:\ /offwindir=D:\windows


Please update the Ten Forums specs with the Dell computer model.

DELL hardware testing: http://www.dell.com/support/article/...codes-?lang=en
Dell Preboot diagnostics: https://www.dell.com/support/home/us...-boot-analysis
https://www.dell.com/support/article...ervers?lang=en
http://www.dell.com/support/article/...codes-?lang=en
https://www.dell.com/support/article...ows-10?lang=en
https://www.dell.com/support/manuals...619&lang=en-us

Must not have been a space... it ran this time working through the DISM ************** /restorehealth now....
I'll run the sfc /scannow********** next.
I updated spec's as best I could.
Been trying the Dell f12 hotkey every time I restart... so far no go.

Please post results for each of the three commands:

revertpendingactions
restorehealth
scannow

It's still working through the DISM ************** /restorehealth...

Slowly churning along... it/ check that was just about to say it got to 50% a lot quicker than it's going past it but after 20min from 50--> 54.3% it bounced to 100%
The operation as well as the revertpendingactions both completed successfully.
Going to run the scannow now...

- - - Updated - - -

sfc / scannow...

Windows Resource Protection did not find any integrity violations.

Should I try the bootrec / rebuildbcd again or maybe this...

diskpart
sel disk 0
list par
select par 2
del par override
create par efi
format quick fs=fat32
assign letter=W
exit

bcdboot D:\Windows /s W: /f UEFI

?

- - - Updated - - -

on bootrec /rebuildbcd it identified windows installations: 1

tried add to boot list Y and A.... keep getting "The requested system device cannot be found"