Toshiba Satellite Click 10 boot problems  

Thank you all for your assistance

I created a recovery drive of another laptop.
so far so good, select Language / keyboard layout then "choose an option" (Recover from a drive / troubleshoot / turn off your pc)

I selected recover from a drive then I have two options "Just remove my files" or "clear the drive fully"

I have selected clear drive fully - "unable to recover your pc. The system drive is to small.

Any suggestions?


Something was mentioned before about the hard drive. It does show the hard drive in the F2 screen

- - - Updated - - -

This is my F2 Screen which has limited options!

Can't read the attached images (use the insert images near the globe with a red x).

Are you saying that the drive is healthy?

Yes I Believe it is.

I have an ok understanding on pc technology, I think it is missing the bootable files. There are no options in F2 like main, security, power management, advanced or exit. They just don't show

I think it is missing the bootable files

You can repair them from command prompt on your installation media.

Hi SW2

Do you have a step by step on how to do this?

One way:

You can extract the portable version of diskgenius onto your installation usb, Then use notepad to navigate to diskgenius.exe and run it

NAVIGATE WITH NOTEPAD

Diskgenius portable 64 bit
https://engdownload.eassos.cn/winpe/...411178_x64.zip

32 bit
https://engdownload.eassos.cn/winpe/...411178_x86.zip

Among other things, it can be used to add a drive letter to the system/esp partition. For example letter S
If your windows partition shows as D from winpe, then open cmd prompt and type:

bcdboot D:\windows /s S:


then press enter

We need to know if your disk is a Legacy - MBR or EFI - GPT.
Boot from the Win 10 installation drive (or recover drive) and launch a CMD windows and type

diskpart
list disk (take note the number of the internal drive)
select disk n (replace n with the number of the internal drive)
list part (take note of the partitions names)
exit

List the partition names here

Megahertz

on computer : MININT-PGSE80I

DISKPART> list disk

Disk Status Size Free
Disk 0 online 29GB 29GB
Disk 1 online 74GB 42GB

List the partition names here

sel dis 0
lis par
sel dis 1
lis par
lis vol

>select disk n

the disk you specified is not valid
there is no disc selected

>list part
there is no disk selected to list partitions.
select a disk and try again

- - - Updated - - -

>sel dis 0
disk 0 is now the selected disk

>lis par
There are no partitions on this disk to show

>sel dis 1
Disk 1 is now the selected disk

>lis par

type size offset
Partition 1 primary 32GB 1024 KB

- - - Updated - - -

>lis vol

ltr label fs type size status info
volume 0 c recovery fat32 partition 32gb healthy