I booted my laptop and there was no WIFI connection.
I did some troubleshooting with connection and nothing.
Then I rebooted the laptop and no matter if I turn it on or reboot I get screen with message preparing automatic repair,and Automatic Repair Welcome Screen.
How do I exit from this and boor normally like first time I turned on laptop?
What are the status of the important computer files:
a) files backed up to another drive or the cloud
b) backed up images saved to another drive or the cloud
c) no backed up files or images > files need to be saved
d) no backed up files or images > files do not need to be saved
Sometimes there is registry corruption causing automatic repair loops.
Find a flash drive that you can format ( > or = 8 GB)
Create a bootable Windows 10 iso:
https://www.microsoft.com/en-us/soft...load/windows10
Download Windows 10 ISO File
Create Bootable USB Flash Drive to Install Windows 10
Boot the windows 10 iso > click in the left lower corner to repair > troubleshoot > command prompt > type:
bcdedit /set {default} recoveryenabled No
reboot
There may be problems with the reboot > take pictures > post error messages and codes
Additional steps pending the error messages and codes.
After turning off automatic repair there may be error messages or codes.
If they appear please use a camera or smartphone camera to take pictures and upload images into this thread.
If there are any problems posting images please use share links: one drive, drop box, or google drive
Take Screenshot in Windows 10
https://support.microsoft.com/en-gb/...re-screenshots
How to Upload and Post Screenshots and Files at Ten Forums
See post #2:
The command is ran after booting to the Windows 10 iso.
Code:bcdedit /set {default} recoveryenabled No
Troubleshooting steps can be performed using a Windows 10 iso.
Windows 10 iso are free.
These were from post #2:
What are the status of the important computer files:
a) files backed up to another drive or the cloud
b) backed up images saved to another drive or the cloud
c) no backed up files or images > files need to be saved
d) no backed up files or images > files do not need to be saved
Sometimes there is registry corruption causing automatic repair loops.
This was from post #4:
If there are any problems posting images please use share links: one drive, drop box, or google drive
1) When available please post the answer to the above question
2) Make sure that share links are one of these 4 options: one drive, drop box, google drive, or amazon
3) The image displayed:
Code:The operating system could not be loaded because the system registry file is missing or contains errorsCode:File: \Windows\system32\config\systemCode:Error code: 0xc0000225
4) Find a flash drive that you can format
5) Create a bootable Ubuntu flash drive:
Create a bootable USB stick on Windows | Ubuntu
6) Backup any important files using Ubuntu
There use to be a method to repair the registry using regback.
This was not maintained by Microsoft on the latest Windows versions.
So all steps are trial and error.
7) Boot to the Windows 10 iso > click system restore > start with the oldest system restore point > keep repeating as necessary up to the most recent restore point
If system restore fails or if there are no restore points then advance to the next step.
8) Please make sure that you followed steps #4 - #6 to backup files
Post images of these commands with results:
9) Open command prompt and copy and paste:
bcdedit /set {default} recoveryenabled Yes
10) Click enter
10) Copy and paste: cd %windir%\system32\config
11) Click enter
12) Copy and paste: ren system system.001
13) Click enter
14) reboot > automatic repair > post images of any error messages or codes
15) Test the drive using Sea Tools bootable: long generic > post images into the thread
SeaTools | Seagate Support US
Last edited by zbook; 22 Jul 2020 at 09:26.
Quote
