Unable to Start in Safe Mode Win10

Page 1 of 3 123 LastLast

  1. Posts : 10
    windows10
       #1

    Unable to Start in Safe Mode Win10


    Hello,

    My system unable to start in safe mode, but normal start works without any problem.

    whenever i try safe mode by selecting "4" screen take me to diagnosing system attempting repair loop every time.
    in last SRTTRAIL LOG Done.

    i tried all chkdsk, bootrec options... no help...
      My Computer

  2. dalchina's Avatar
    Posts : 30,547
    Win 10 Pro (1903)
       #2

    Hi, please post a screenshot of your partitions using Minitool Partition Wizard or similar (not Disk Management) making sure all text is visible.

    From an admin command prompt please run
    reagentc /info
    and post a screenshot of the result. (Shows status of your recovery partition).
    To post a screenshot please use the Insert Image icon above your post.
      My Computers


  3. Posts : 10
    windows10
    Thread Starter
       #3

    dalchina said:
    Hi, please post a screenshot of your partitions using Minitool Partition Wizard or similar (not Disk Management) making sure all text is visible.

    From an admin command prompt please run
    reagentc /info
    and post a screenshot of the result. (Shows status of your recovery partition).
    To post a screenshot please use the Insert Image icon above your post.
    Hello,

    as you wanted screenshot attachedUnable to Start in Safe Mode Win10-cmd_2019-03-05_01-11-45.jpgUnable to Start in Safe Mode Win10-partitionwizard_2019-03-05_01-15-46.jpg
      My Computer

  4. dalchina's Avatar
    Posts : 30,547
    Win 10 Pro (1903)
       #4

    That's all ok as far as is shown, thanks.

    What is your Windows build? Windows key + r, winver

    Please check your disk before proceding further: download and install Hard Disk Sentinel (trial) and post a screenshot of its GUI.

    If ok, then run
    chkdsk c: /scan
    from an admin command or Powershell prompt and post the result.

    If ok, you can first try Startup repair from the advanced startup options. Then try to boot to Safe Mode again.
    That may or may not help.

    If not, try running
    SFC /SCANNOW
    from and admin command or powershell prompt and post the result.
    Then try to boot to Safe Mode again.


    If still no success, I suggest you try an in-place upgrade repair install which keeps all progs, data and most settings.
    For that, you need an iso of the same build and base language as your installed OS (freely downloadable).
      My Computers


  5. Posts : 10
    windows10
    Thread Starter
       #5

    dalchina said:
    That's all ok as far as is shown, thanks.

    What is your Windows build? Windows key + r, winver

    Please check your disk before proceding further: download and install Hard Disk Sentinel (trial) and post a screenshot of its GUI.

    If ok, then run
    chkdsk c: /scan
    from an admin command or Powershell prompt and post the result.

    If ok, you can first try Startup repair from the advanced startup options.
    That may or may not help.

    If not, I suggest you try an in-place upgrade repair install which keeps all progs, data and most settings.
    For that, you need an iso of the same build and base language as your installed OS (freely downloadable).
    Check WinVersion Unable to Start in Safe Mode Win10-winver_2019-03-05_01-33-23.jpg What happen suddenly windows not able to start in Safe-mode normal start working fine. Safe Mode take me to diagnosing Computer attempting repair
      My Computer

  6. dalchina's Avatar
    Posts : 30,547
    Win 10 Pro (1903)
       #6

    What happen suddenly windows not able to start in Safe-mode normal start working fine. Safe Mode take me to diagnosing Computer attempting repair
    I understand that as repeating the basic problem. Is that what you mean? I can't tell you why- some sort of corruption- hence all the steps I'm suggesting. Please try each in turn.

    The first are to check for basic forms of corruption and so proceed onwards in order.
      My Computers


  7. Posts : 913
    CP/M
       #7

    tushar said:
    My system unable to start in safe mode, but normal start works without any problem.
    I met this behavior at 1809 version.

    Check your srttrail logfile. If it includes at the end something like

    Code:
    testing disk metadata ... completed successfully ... error code 0x32
    then use in-place upgrade using same version media to repair safe mode function; other troubleshooting methods seem to be useless.

    Btw error 0x32 means "the request is not supported" but there is zero documentation what "testing disk metadata" step does.
      My Computer


  8. Posts : 10
    windows10
    Thread Starter
       #8

    muchomurka said:
    I met this behavior at 1809 version.

    Check your srttrail logfile. If it includes at the end something like

    Code:
    testing disk metadata ... completed successfully ... error code 0x32
    then use in-place upgrade using same version media to repair safe mode function; other troubleshooting methods seem to be useless.

    Btw error 0x32 means "the request is not supported" but there is zero documentation what "testing disk metadata" step does.
    Here is my LOG i did everything SFC commands nothing helped, one more problem im facing whenever i load NVIDIA graphic card Driver screen go "NO VIDEO INPUT" have to clean nvidia driver from system to use system.
    Code:
    Startup Repair diagnosis and repair log
    ---------------------------
    Number of repair attempts: 1
    
    Session details
    ---------------------------
    System Disk = \Device\Harddisk0
    Windows directory = F:\Windows
    AutoChk Run = 0
    Number of root causes = 1
    
    Test Performed: 
    ---------------------------
    Name: Check for updates
    Result: Completed successfully. Error code =  0x0
    Time taken = 0 ms
    
    Test Performed: 
    ---------------------------
    Name: System disk test
    Result: Completed successfully. Error code =  0x0
    Time taken = 16 ms
    
    Test Performed: 
    ---------------------------
    Name: Disk failure diagnosis
    Result: Completed successfully. Error code =  0x0
    Time taken = 0 ms
    
    Test Performed: 
    ---------------------------
    Name: Disk metadata test
    Result: Completed successfully. Error code =  0x0
    Time taken = 0 ms
    
    Test Performed: 
    ---------------------------
    Name: Target OS test
    Result: Completed successfully. Error code =  0x0
    Time taken = 0 ms
    
    Test Performed: 
    ---------------------------
    Name: Volume content check
    Result: Completed successfully. Error code =  0x0
    Time taken = 94 ms
    
    Root cause found: 
    ---------------------------
    The operating system version is incompatible with Startup Repair
    
    ---------------------------
    ---------------------------
      My Computer


  9. Posts : 913
    CP/M
       #9

    Different issue than mine. Maybe it can arise while os and recovery partitions are from different versions (wrong disk cloning, multiboot, restoring old image w/o recovery partition etc).

    Anyway, perform in-place upgrade and check safe mode after that.
      My Computer

  10. dalchina's Avatar
    Posts : 30,547
    Win 10 Pro (1903)
       #10

    Please do the disk check items as a matter of course first.
      My Computers


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 22:24.
Find Us




Windows 10 Forums