Start up / Boot problem - Bios issue UEFI / Legacy Wrong drive default

Page 1 of 2 12 LastLast

  1. Posts : 34
    win 10
       #1

    Start up / Boot problem - Bios issue UEFI / Legacy Wrong drive default


    Hi All,

    Had a few problems with a driver that messed up this machine. All sorted, but have had intermittent boot issues ever since.

    Sometimes it doesn't boot correct, showing the Windows "preparing automatic repair screen!. I then go to "troubleshoot", then "advanced options", then "UEFI firmware settings", then restart. This brings up the boot options menu from which I can select the correct drive.

    Start up / Boot problem - Bios issue UEFI / Legacy Wrong drive default-pc-boot-issue1image4188.jpg

    I checked "msinfo32" which shows that windows is set to legacy mode. So I thought I would check the BIOS settings match.

    It seems that I can only turn legacy on or off, I cannot turn UEFI on or off?

    As the images below show, the correct drive options are set under legacy, but it seems windows tries to boot in UEFI, fails then tries to repair.

    Start up / Boot problem - Bios issue UEFI / Legacy Wrong drive default-pc-boot-issue2image42120.jpg

    has anyone any advice on how to resolve this?

    thanks in advance! all help is much appreciated
    Last edited by supermonkey; 16 Dec 2018 at 16:18.
      My Computer

  2. Samuria's Avatar
    Posts : 6,055
    windows 10
       #2

    Which drive is your boot drive the raid or ssd?
      My Computer


  3. Posts : 34
    win 10
    Thread Starter
       #3

    Boot drive is the SSD.

    There is not a raid set up though, its is etc on the SSD & larger mech drive for storage
      My Computer


  4. Posts : 38,400
    windows 10 professional version 1607 build 14393.969 64 bit
       #4

    1) Open disk management > by default there are compressed rows > manually widen these two rows: Status and Volume > make sure that the characters in each row are in full view and that none of the letters are cutoff > post an image into the thread

    Disk Management - How to Post a Screenshot of | Tutorials

    2) Run the BETA log collector and post a zip into this thread:
    BSOD - Posting Instructions - Windows 10 Forums
    https://www.tenforums.com/attachment...-v2-beta15.zip
    (extract all > open)

    3) Open administrative command prompt and type or copy and paste:
    4) sfc /scannow
    5) dism /online /cleanup-image /restorehealth
    6) chkdsk /scan
    7) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

    8) Copy and paste all of the commands at one time:

    Code:
    bcdedit /enum
    bcdedit | find "osdevice"
    reagentc /info
    diskpart
    list disk
    list volume
    select disk 0
    detail disk
    list partition
    select partition 1
    detail partition
    select partition 2
    detail partition
    select partition 3
    detail partition
    select partition 4
    detail partition
    select partition 5
    detail partition
    select disk 1
    detail disk
    list partition
    exit
    9) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

    10) In the BIOS check for options for:
    UEFI native without CSM
    UEFI hybrid with CSM
      My Computer


  5. Posts : 34
    win 10
    Thread Starter
       #5

    Many thanks, results etc below:

    Start up / Boot problem - Bios issue UEFI / Legacy Wrong drive default-diskmanagement17-12-18.jpg

    Attachment 217606

    Code:
    Microsoft Windows [Version 10.0.17134.471]
    (c) 2018 Microsoft Corporation. All rights reserved.
    
    C:\WINDOWS\system32>sfc /scannow
    
    Beginning system scan.  This process will take some time.
    
    Beginning verification phase of system scan.
    Verification 100% complete.
    
    Windows Resource Protection did not find any integrity violations.
    
    C:\WINDOWS\system32>dism /online /cleanup-image/restorehealth
    
    Deployment Image Servicing and Management tool
    Version: 10.0.17134.1
    
    Image Version: 10.0.17134.471
    
    
    Error: 87
    
    The cleanup-image/restorehealth option is unknown.
    For more information, refer to the help by running DISM.exe /?.
    
    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
    
    C:\WINDOWS\system32>chkdsk /scan
    The type of the file system is NTFS.
    Volume label is Windows.
    
    Stage 1: Examining basic file system structure ...
      513792 file records processed.
    File verification completed.
      12845 large file records processed.
      0 bad file records processed.
    
    Stage 2: Examining file name linkage ...
      517 reparse records processed.
      618766 index entries processed.
    Index verification completed.
      0 unindexed files scanned.
      0 unindexed files recovered to lost and found.
      517 reparse records processed.
    
    Stage 3: Examining security descriptors ...
    Security descriptor verification completed.
      52488 data files processed.
    CHKDSK is verifying Usn Journal...
      34804856 USN bytes processed.
    Usn Journal verification completed.
    
    Windows has scanned the file system and found no problems.
    No further action is required.
    
     242720042 KB total disk space.
      71664320 KB in 308679 files.
        183672 KB in 52489 indexes.
             0 KB in bad sectors.
        634270 KB in use by the system.
         65536 KB occupied by the log file.
     170237780 KB available on disk.
    
          4096 bytes in each allocation unit.
      60680010 total allocation units on disk.
      42559445 allocation units available on disk.
    
    C:\WINDOWS\system32>
    Code:
    Microsoft Windows [Version 10.0.17134.471]
    (c) 2018 Microsoft Corporation. All rights reserved.
    
    C:\WINDOWS\system32>bcdedit /enum
    
    Windows Boot Manager
    --------------------
    identifier              {bootmgr}
    device                  partition=\Device\HarddiskVolume1
    description             Windows Boot Manager
    locale                  en-US
    inherit                 {globalsettings}
    default                 {current}
    resumeobject            {e9db5614-6574-11e8-9ba6-9e9a7eef5337}
    displayorder            {current}
    toolsdisplayorder       {memdiag}
    timeout                 30
    
    Windows Boot Loader
    -------------------
    identifier              {current}
    device                  partition=C:
    path                    \WINDOWS\system32\winload.exe
    description             Windows 10
    locale                  en-US
    inherit                 {bootloadersettings}
    recoverysequence        {8a7f5190-6529-11e8-ae75-e2c91ebf33a5}
    displaymessageoverride  Recovery
    recoveryenabled         Yes
    allowedinmemorysettings 0x15000075
    osdevice                partition=C:
    systemroot              \WINDOWS
    resumeobject            {e9db5614-6574-11e8-9ba6-9e9a7eef5337}
    nx                      OptIn
    bootmenupolicy          Standard
    
    C:\WINDOWS\system32>bcdedit | find "osdevice"
    osdevice                partition=C:
    
    C:\WINDOWS\system32>reagentc /info
    Windows Recovery Environment (Windows RE) and system reset configuration
    Information:
    
        Windows RE status:         Enabled
        Windows RE location:       \\?\GLOBALROOT\device\harddisk0\partition3\Recovery\WindowsRE
        Boot Configuration Data (BCD) identifier: 8a7f5190-6529-11e8-ae75-e2c91ebf33a5
        Recovery image location:
        Recovery image index:      0
        Custom image location:
        Custom image index:        0
    
    REAGENTC.EXE: Operation Successful.
    
    
    C:\WINDOWS\system32>diskpart
    
    Microsoft DiskPart version 10.0.17134.1
    
    Copyright (C) Microsoft Corporation.
    On computer: LISA-HP
    
    DISKPART> list disk
    
      Disk ###  Status         Size     Free     Dyn  Gpt
      --------  -------------  -------  -------  ---  ---
      Disk 0    Online          232 GB  1024 KB
      Disk 1    Online         1397 GB  6144 KB        *
    
    DISKPART> list volume
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
      Volume 0         System Rese  NTFS   Partition    500 MB  Healthy    System
      Volume 1     C   Windows      NTFS   Partition    231 GB  Healthy    Boot
      Volume 2     F   WINRE        NTFS   Partition    650 MB  Healthy
      Volume 3     G                FAT32  Partition    260 MB  Healthy
      Volume 4     D   Data         NTFS   Partition   1374 GB  Healthy
      Volume 5                      NTFS   Partition    856 MB  Healthy
      Volume 6     E   RECOVERY     NTFS   Partition     21 GB  Healthy    Hidden
    
    DISKPART> select disk 0
    
    Disk 0 is now the selected disk.
    
    DISKPART> detail disk
    
    Samsung SSD 850 EVO 250GB
    Disk ID: C266F835
    Type   : SATA
    Status : Online
    Path   : 0
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(1F02)#ATA(C00T00L00)
    Current Read-only State : No
    Read-only  : No
    Boot Disk  : Yes
    Pagefile Disk  : Yes
    Hibernation File Disk  : No
    Crashdump Disk  : Yes
    Clustered Disk  : No
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
      Volume 0         System Rese  NTFS   Partition    500 MB  Healthy    System
      Volume 1     C   Windows      NTFS   Partition    231 GB  Healthy    Boot
    
    DISKPART> list partition
    
      Partition ###  Type              Size     Offset
      -------------  ----------------  -------  -------
      Partition 1    Primary            500 MB  1024 KB
      Partition 2    Primary            231 GB   501 MB
      Partition 3    Recovery           940 MB   231 GB
    
    DISKPART> select partition 1
    
    Partition 1 is now the selected partition.
    
    DISKPART> detail partition
    
    Partition 1
    Type  : 07
    Hidden: No
    Active: Yes
    Offset in Bytes: 1048576
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 0         System Rese  NTFS   Partition    500 MB  Healthy    System
    
    DISKPART> select partition 2
    
    Partition 2 is now the selected partition.
    
    DISKPART> detail partition
    
    Partition 2
    Type  : 07
    Hidden: No
    Active: No
    Offset in Bytes: 525336576
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 1     C   Windows      NTFS   Partition    231 GB  Healthy    Boot
    
    DISKPART> select partition 3
    
    Partition 3 is now the selected partition.
    
    DISKPART> detail partition
    
    Partition 3
    Type  : 27
    Hidden: No
    Active: No
    Offset in Bytes: 249071403008
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
    * Volume 7                      NTFS   Partition    940 MB  Healthy    Hidden
    
    DISKPART> select partition 4
    
    The specified partition is not valid.
    Please select a valid partition.
    
    There is no partition selected.
    
    DISKPART> detail partition
    
    There is no partition selected.
    Please select a partition and try again.
    
    DISKPART> select partition 5
    
    The specified partition is not valid.
    Please select a valid partition.
    
    There is no partition selected.
    
    DISKPART> detail partition
    
    There is no partition selected.
    Please select a partition and try again.
    
    DISKPART> select disk 1
    
    Disk 1 is now the selected disk.
    
    DISKPART> detail disk
    
    ST1500LM006 HN-M151RAD
    Disk ID: {9731E7FF-5179-4715-8A42-4802CF4F9C65}
    Type   : SATA
    Status : Online
    Path   : 1
    Target : 0
    LUN ID : 0
    Location Path : PCIROOT(0)#PCI(1F02)#ATA(C01T00L00)
    Current Read-only State : No
    Read-only  : No
    Boot Disk  : No
    Pagefile Disk  : No
    Hibernation File Disk  : No
    Crashdump Disk  : No
    Clustered Disk  : No
    
      Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
      ----------  ---  -----------  -----  ----------  -------  ---------  --------
      Volume 2     F   WINRE        NTFS   Partition    650 MB  Healthy
      Volume 3     G                FAT32  Partition    260 MB  Healthy
      Volume 4     D   Data         NTFS   Partition   1374 GB  Healthy
      Volume 5                      NTFS   Partition    856 MB  Healthy
      Volume 6     E   RECOVERY     NTFS   Partition     21 GB  Healthy    Hidden
    
    DISKPART> list partition
    
      Partition ###  Type              Size     Offset
      -------------  ----------------  -------  -------
      Partition 1    Primary            650 MB  1024 KB
      Partition 2    Primary            260 MB   651 MB
      Partition 3    Reserved           128 MB   911 MB
      Partition 4    Primary           1374 GB  1039 MB
      Partition 5    Recovery           856 MB  1375 GB
      Partition 6    System              21 GB  1376 GB
    
    DISKPART> exit
    BIOS settings show the following for UEFI without CSM

    Start up / Boot problem - Bios issue UEFI / Legacy Wrong drive default-img_1230.jpg
      My Computer

  6. NavyLCDR's Avatar
    Posts : 15,515
    Windows 10 Pro
       #6

    Why not boot in UEFI mode?
      My Computer


  7. Posts : 34
    win 10
    Thread Starter
       #7

    Sorry, I don't follow. Windows is set to "Legacy" as noted in first post.

    UEFI mode seems to be the problem - it doesn't "find" the SSD which is the boot drive.

    I did try changing the Legacy support mode, but made no difference.
      My Computer

  8. NavyLCDR's Avatar
    Posts : 15,515
    Windows 10 Pro
       #8

    supermonkey said:
    Sorry, I don't follow. Windows is set to "Legacy" as noted in first post.

    UEFI mode seems to be the problem - it doesn't "find" the SSD which is the boot drive.

    I did try changing the Legacy support mode, but made no difference.
    UEFI mode doesn't "find" the SSD because there likely is not a FAT32 system partition on it. Delete the NTFS system partition, create a FAT32 system partition, mark it as active, write boot files to it using the bcdboot command with the /fw ALL option and it will boot in both UEFI and legacy modes.

    Barring a hardware issue, almost guaranteed to solve your problem.
      My Computer


  9. Posts : 34
    win 10
    Thread Starter
       #9

    Thanks....

    But is there any advantage to UEFI? I'm happy just using Legacy but can't get it to default to it.

    Its very strange though, nothing has changed on the system so why was this behaviour not happening before?!
      My Computer


  10. Posts : 38,400
    windows 10 professional version 1607 build 14393.969 64 bit
       #10

    1) UEFI offers better security, is benchmark faster, and has options for more partitions and is needed to use larger size drives.

    UEFI/GPT-based hard drive partitions | Microsoft Docs
    Check if Windows 10 is using UEFI or Legacy BIOS | Tutorials


    2) Turn off Windows fast startup:

    Turn On or Off Fast Startup in Windows 10 | Tutorials

    3) For disk management please widen the Status column so that all characters in each row are in full view > re-post or post a new image.
    Disk Management - How to Post a Screenshot of | Tutorials

    4) In the left lower corner search type: system or system control > open system control panel > on the left pane click advanced system settings
    a) > on the advanced tab under startup and recovery > click settings > post an image of the startup and recovery window into the thread.
    b) > on the advanced tab under performance > click on settings > on the performance options window > click on the advanced tab > under virtual memory > click on change > post an image of the virtual memory window into the thread

    5) Open Ccleaner > click windows tab > scroll down to system and advanced > post an image into the thread

    6) Download and install HP Diagnostics Windows: (right upper area of this link)
    HP PC Hardware Diagnostics | HP® Official Site

    7) Launch HP PC Hardware Diagnostics version 1.5.4.0
    a) Click system tests > click system extensive test > click run once > run the test overnight > in the AM click component tests > widen video > check all boxes > click run once (some are interactive) > click test logs > use the snipping tool > post an image into the thread using a share link (one drive, drop box, google drive)

    8) Open administrative command prompt and type or copy and paste:
    chkdsk /r /v

    Run this command on all drives using the syntax: chkdsk /r /v C: or chkdsk /r /v D: changing the drive letter to the applicable drive
    This command may take many hours to run so plan to run overnight.

    C:\WINDOWS\system32>chkdsk /r /v C:
    The type of the file system is NTFS.
    Cannot lock current drive.

    Chkdsk cannot run because the volume is in use by another
    process. Would you like to schedule this volume to be
    checked the next time the system restarts? (Y/N)

    Type: Y
    reboot

    Use the text and images in this link to find the chkdsk reports in the event viewer > copy and paste > notepad > post share links into the thread
    Read Chkdsk Log in Event Viewer in Windows 10 | Tutorials


    9) Run HD Tune: (free edition) (all drives)
    https://www.hdtune.com/
    Post images into the thread use share links for test results on these tabs:
    a) Health (SMART)
    b) Benchmark
    c) Full error scan




    Code:
    Event[1108]:
      Log Name: System
      Source: Microsoft-Windows-Ntfs
      Date: 2018-12-07T19:34:46.766
      Event ID: 98
      Task: N/A
      Level: Error
      Opcode: Info
      Keyword: N/A
      User: S-1-5-18
      User Name: NT AUTHORITY\SYSTEM
      Computer: Lisa-HP
      Description: 
    Volume \\?\Volume{e8dc07a7-e36d-49dd-9572-5887e46656fc} (\Device\HarddiskVolume8) needs to be taken offline to perform a Full Chkdsk.  Please run "CHKDSK /F" locally via the command line, or run "REPAIR-VOLUME <drive:>" locally or remotely via PowerShell.
    Code:
    08/06/2018 13:14	Windows Error Reporting	Fault bucket LKD_0x141_Tdr:6_IMAGE_igdkmd64.sys_GEN7.5_0_BBHANG, type 0
    Event Name: LiveKernelEvent
    Response: Not available
    Cab Id: 16e45e7b-994b-4577-b2df-59c8e023ac65
    
    Problem signature:
    P1: 141
    P2: ffffa483669ea010
    P3: fffff801b04c6560
    P4: 0
    P5: 3548
    P6: 10_0_17134
    P7: 0_0
    P8: 768_1
    P9: 
    P10: 
    
    Attached files:
    \\?\C:\WINDOWS\LiveKernelReports\WATCHDOG\WATCHDOG-20180608-1414.dmp
    \\?\C:\WINDOWS\TEMP\WER-654557703-0.sysdata.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERD957.tmp.WERInternalMetadata.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERD968.tmp.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERD967.tmp.csv
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERD987.tmp.txt
    \\?\C:\Windows\Temp\WERFC42.tmp.WERDataCollectionStatus.txt
    
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_141_342a9f4d062d1af3775b9cb454e018d5c738ee_00000000_cab_08280161
    
    Analysis symbol: 
    Rechecking for solution: 0
    Report Id: 0c625582-628d-4ce8-95db-c683fb8b2201
    Report Status: 268435456
    Hashed bucket: 
    Cab Guid: 0
    24/11/2018 12:43	Windows Error Reporting	Fault bucket LKD_0x141_Tdr:6_IMAGE_igdkmd64.sys_GEN7.5_0_BBHANG, type 0
    Event Name: LiveKernelEvent
    Response: Not available
    Cab Id: 783fe708-8faa-4b7e-a37f-59e3b0ea2fe0
    
    Problem signature:
    P1: 141
    P2: ffff800941c8f360
    P3: fffff80f0e8f6560
    P4: 0
    P5: 2220
    P6: 10_0_17134
    P7: 0_0
    P8: 768_1
    P9: 
    P10: 
    
    Attached files:
    \\?\C:\WINDOWS\LiveKernelReports\WATCHDOG\WATCHDOG-20181124-1243.dmp
    \\?\C:\WINDOWS\TEMP\WER-759724921-0.sysdata.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERA420.tmp.WERInternalMetadata.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERA430.tmp.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERA42F.tmp.csv
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERA450.tmp.txt
    \\?\C:\Windows\Temp\WEREA32.tmp.WERDataCollectionStatus.txt
    
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_141_7096dbb8ebb82d59d996e27d139a778ab8ecf_00000000_cab_2924ef42
    
    Analysis symbol: 
    Rechecking for solution: 0
    Report Id: b98a444d-6ec1-4f66-bc11-6f836767253b
    Report Status: 268435456
    Hashed bucket: 
    Cab Guid: 0
    12/07/2018 15:03	Windows Error Reporting	Fault bucket LKD_0x141_Tdr:6_IMAGE_igdkmd64.sys_GEN7.5_0_BBHANG, type 0
    Event Name: LiveKernelEvent
    Response: Not available
    Cab Id: a7989bac-24fc-49c1-837f-3a4cbb7716cc
    
    Problem signature:
    P1: 141
    P2: ffff8000d234d010
    P3: fffff803c4496560
    P4: 0
    P5: 1cf4
    P6: 10_0_17134
    P7: 0_0
    P8: 768_1
    P9: 
    P10: 
    
    Attached files:
    \\?\C:\WINDOWS\LiveKernelReports\WATCHDOG\WATCHDOG-20180711-1723.dmp
    \\?\C:\WINDOWS\TEMP\WER-79201343-0.sysdata.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERB310.tmp.WERInternalMetadata.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERB340.tmp.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERB33F.tmp.csv
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERB36E.tmp.txt
    \\?\C:\Windows\Temp\WER4C3.tmp.WERDataCollectionStatus.txt
    
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_141_e9ff5d2f1061a1b4dc4292f8d783287bec4776c_00000000_cab_3a9a0908
    
    Analysis symbol: 
    Rechecking for solution: 0
    Report Id: 1bfaf01f-b6b1-4221-89bb-a73f48b84e5f
    Report Status: 268435456
    Hashed bucket: 
    Cab Guid: 0
    23/11/2018 16:07	Windows Error Reporting	Fault bucket LKD_0x141_Tdr:6_IMAGE_igdkmd64.sys_GEN7.5_0_BBHANG, type 0
    Event Name: LiveKernelEvent
    Response: Not available
    Cab Id: ce3f1202-328b-4b33-9cfb-18a261187e8e
    
    Problem signature:
    P1: 141
    P2: ffff800947dbc010
    P3: fffff80f0e8f6560
    P4: 0
    P5: 2e3c
    P6: 10_0_17134
    P7: 0_0
    P8: 768_1
    P9: 
    P10: 
    
    Attached files:
    \\?\C:\WINDOWS\LiveKernelReports\WATCHDOG\WATCHDOG-20181123-1607.dmp
    \\?\C:\WINDOWS\TEMP\WER-685573437-0.sysdata.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER277B.tmp.WERInternalMetadata.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER278B.tmp.xml
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER278A.tmp.csv
    \\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER27BA.tmp.txt
    \\?\C:\Windows\Temp\WER58CD.tmp.WERDataCollectionStatus.txt
    
    These files may be available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_141_4491507093747a9dd12881b2aba0b4c2572cb2ad_00000000_cab_3bbd5d7f
    
    Analysis symbol: 
    Rechecking for solution: 0
    Report Id: 448a68c7-6e04-40a0-9ea4-76a48d05616c
    Report Status: 268435456
    Hashed bucket: 
    Cab Guid: 0
    Code:
    Event[1886]:
      Log Name: System
      Source: Microsoft-Windows-Kernel-Boot
      Date: 2018-12-17T09:31:06.768
      Event ID: 29
      Task: N/A
      Level: Error
      Opcode: Info
      Keyword: N/A
      User: S-1-5-18
      User Name: NT AUTHORITY\SYSTEM
      Computer: Lisa-HP
      Description: 
    Windows failed fast startup with error status 0xC00000D4.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:57.
Find Us




Windows 10 Forums