PC Freezing for short periods -> DistributedCOM Error?

With a backup image you can immediately go to 19 simultaneous tests.
Again this is a measured approach.

Over time running windows driver verifier on many computers there will be some that have boot loops.
These typically end up with a clean install or restoring a backup image.

Just wondering: Given that adding on slows things down...would it be a bad idea to check different drivers at different times, as opposed to ultimately having all 19 tested at the same time?

There are options.
The preferred method is to check all drivers simultaneously and alter the number of tests.
Tests can be added and some can be removed.
All drivers are eventually tested with all tests over the approximate 48 hour period.
And then after the last BSOD for an additional 36 hours.

Ok. I achieved a BSOD. FYI...while running that I got a WARNING of "Failed to download autorunsc. Skippin..."

Here is a Dropbox link to the Beta Log Collector File -> LINK

Here is a Dropbox link to the Memory.dmp file-> LINK

Below is a printscreen of the BSOD, which says the stop code is KERNEL_SECURITY_CHECK_FAILURE. Not sure what driver I'd replace.

I found this thread on the kernel error. I will pursue this path unless I hear otherwise tree.

Please do not follow any links.
They may or may not apply to your computer.
They can consume time and can misdirect you to unnecessary steps.
Some of the unnecessary steps can have unwanted pitfalls.
In this forum you are receiving personal service on the computer.
All steps will be tailored towards the findings of this specific computer environment.

Ok. Sure, no problem. I was feeling like I was relying too much on you.

I did see something about running the same test from safe mode and see if it still fails. I haven't tried that.

So for now, I am booted back with the Driver Verifier off (I think ;-0 ), and will await further instructions.

JFYI...I did run Bluescreenview, and it points to ntoskrnl.exe.

1) There was one misbehaving driver identified in the latest dump files.

2) Uninstall and reinstall Intel GPU drivers: Igdkmd64.sys IGFX

Updating a driver. - Microsoft Community

Driver - HP ENVY x360 - 15-aq292cl | HP® Customer Support

3) Perform Windows updates


4) The link for Windows driver verifier displayed:

Code:

Select everything.  For Win 8 and win 10  dont checkDDI compliance checking and randomized low resource simulation, then click "Next"

Randomized low resource simulation was used in the last test.
5) Please do not use randomized low resource simulation.

6) All customized test settings can be used except:
a) randomized low resource simulation
b) DDI compliance checking
c) DDI compliance checking (additional)

Code:

Name	Intel(R) UHD Graphics 620
PNP Device ID	PCI\VEN_8086&DEV_5917&SUBSYS_8420103C&REV_07\3&11583659&1&10
Adapter Type	Intel(R) UHD Graphics Family, Intel Corporation compatible
Adapter Description	Intel(R) UHD Graphics 620
Adapter RAM	1.00 GB (1,073,741,824 bytes)
Installed Drivers	C:\WINDOWS\System32\DriverStore\FileRepository\ki127756.inf_amd64_cd9f19051b5853c8\igdumdim64.dll,C:\WINDOWS\System32\DriverStore\FileRepository\ki127756.inf_amd64_cd9f19051b5853c8\igd10iumd64.dll,C:\WINDOWS\System32\DriverStore\FileRepository\ki127756.inf_amd64_cd9f19051b5853c8\igd10iumd64.dll,C:\WINDOWS\System32\DriverStore\FileRepository\ki127756.inf_amd64_cd9f19051b5853c8\igd12umd64.dll
Driver Version	24.20.100.6025
INF File	oem17.inf (iKBLD_w10_DS section)
Color Planes	Not Available
Color Table Entries	4294967296
Resolution	1920 x 1080 x 60 hertz
Bits/Pixel	32
Memory Address	0xB0000000-0xB0FFFFFF
Memory Address	0xA0000000-0xAFFFFFFF
I/O Port	0x00003000-0x0000303F
IRQ Channel	IRQ 4294967289
Driver	c:\windows\system32\driverstore\filerepository\ki127756.inf_amd64_cd9f19051b5853c8\igdkmd64.sys (24.20.100.6025, 12.51 MB (13,121,000 bytes), 4/30/2018 2:01 PM)

Code:

igfx	igfx	c:\windows\system32\driverstore\filerepository\ki127756.inf_amd64_cd9f19051b5853c8\igdkmd64.sys	Kernel Driver	No	Manual	Stopped	OK	Ignore	No	No

Code:

igdkmd64.sys Wed Apr 25 17:08:56 2018 (5AE11898)

I downloaded the driver. The instructions in the links you gave me to install the driver was to doubleclick the file and have it install, so I did not uninstall the HD driver first.

When I double click it to install it goes through the processes, and ultimately says the drivers it will replace are newer than the ones I"m installing, and do i want to install. And it not only installs the HD, but the display audio driver also.

Should I just say yes and let it finish?

Thinking a bit about the uninstall of driver: I didn't see a way to uninstall a driver...but did see a way to uninstall the device.

If you want me to do that, just let me know.

Another interesting tidbit: while the install said my existing driver was newer, the date on the downloaded driver in the specifications is newer.